Shop

  • This listing covers model years 1964, 1965, 1966, and 1967 Olds Cutlass & F85 stock with a V8 and single exhaust with muffler and resonator. Photo depicts the stock single exhaust for 1965-67 Olds F85's (except Vista Cruiser) with the stock 330ci V8 & 4bbl carburetor 
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear single in/single out transverse muffler, and tailpipe.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
    • This turbo single exhaust is unique and consists of the front exhaust pipe (AKA crossover pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, resonator, over-axle pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
    • Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1961, 1962, and 1963 F85 and Cutlass's with the stock 215ci and single exhaust. Photo depicts the stock single exhaust for 1963 F85 with the stock 215ci V8.
    • This system is a metal-to-metal connection at the manifold and no gaskets are required there. However, some of these Y pipes do require a gasket at the outlet end and unfortunately Waldron's does not have these gaskets available.
    • Single exhaust system consists of the Y pipe (flange connection to), rear exhaust pipe, single in/single out same end transverse muffler, and tailpipe. Y pipe may be NORS.
    • Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron’s Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system. 
    MY 1962 is unique & we will need to know what barrel carburetor was stock and whether your 1962 is a 1st, 2nd, or 3rd design. You will need to report your set-up to us in the check out process. If you are unsure which design you have, this information should help you make a determination:
    1. 1st Design: The propeller shaft center bearing support is mounted to the floor pan.
    2. 2nd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe will have a flat area 34" from the outlet end.
    3. 3rd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe is round through out (no flattened area).
    Select options This product has multiple variants. The options may be chosen on the product page Details
    • This single exhaust consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1957,1958, 1959, and 1960 Olds 88 and 98, all body styles including SW, stock with a V8 and dual exhaust. 1958 models need to report type of suspension in the check out process.  Photo depicts the system for a 1957 Olds 98.
    • MY 1957 consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, LS front & rear tail pipes, and RS tailpipe.
    • MY 1958 W/O Air Suspension consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, LS front & rear tail pipes, and RS tailpipe.
    • MY 1958 W/Air Suspension consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, and LS/RS tailpipes.
    • MY's 1959-60 consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, and LS/RS tailpipes.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1957, 1958, 1959, and 1960 Olds 88 and 98's with the stock V8 and single exhaust w/1 mufflers. Excludes station wagons, refer to listing 428534. Photo depicts the stock single exhaust for 1959-60 Oldsmobile 88's with the stock V8
    • Single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, front tailpipe, and rear tailpipe.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
    • This dual exhaust system consists of LS/RS exhaust pipes (with LS stock at 2"OD & RS stock at 2¼"OD), LS/RS mufflers, and LS/RS tailpipes (stock at 2"OD).
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1954, 1955, and 1956 Olds 88 and 98 with the stock V8. Photo depicts the system for MY 1956 Olds Super 88.
    • Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe.
    • Regarding 1954 & 1955 models; if ordering the system in T409 SS, the cross-over pipe will be built in 2 pcs. If ordering an aluminized steel system, the cross-over pipe will be NORS.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1949, 1950, 1951, 1952, and 1953 Olds 88 & 98's stock with the V8. Photos depicts the system for MY's 1949-50 Olds 88's with the stock V8.
    • Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe. This system requires 3 gaskets. Waldron's can help you out with a flat gasket but we do not have the Oldsmobile style gasket available. 
    • MY's 1952 & 1953 will need to report whether the vehicle was stock with or without power steering in the check out process.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Listing covers model years 1948, 1949, and 1950 Oldsmobile's stock with a 6 cyl.
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1946, 1947, and 1948 Oldsmobile's with the stock straight 8 and single exhaust,
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Oldsmobile's with the stock 8 cyl. Photo depicts a 1933 Oldsmobile F33.
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
    Select options This product has multiple variants. The options may be chosen on the product page Details
Go to Top