Shop

  • For model years 1970, 1971, 1972, 1973, and 1974 Lincoln's with the stock V8 and single exhaust. The Mark IV begins in 1972.  Excludes the Mark III which were stock with a dual exhaust. Photos depicts the system for 1972-73 Mark IV's with the stock V8.
    • This single exhaust consists of the Y pipe, front muffler, connector pipe, and rear muffler with tailpipe.
    • The Lincoln Continentals require a different system from the Lincoln Mark IV so please, be sure to report your model correctly.
    • For MY 1973, please specify the build date during the check out process (before or after 2-15-73).
  • Listing covers model years 1969, 1970, and 1971 Mark III with the stock V8 and dual exhaust. Photo depicts exhaust system for 1969-71 Lincoln Mark III.
    • Dual exhaust system consists of the H pipe, LS/RS mufflers, LS/RS front connector pipe, LS/RS rear connector pipe, and LS/RS resonator w/tailspout.
    • This stock system starts out at 2¼"OD and reduces down to 1¾"OD at the muffler outlets.
  • This listing covers model years 1966, 1967, 1968, and 1969 Continentals with the stock V8.
    • Dual exhaust consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
    • Waldron's does not offer any sound level options on these systems. OEM sound level only.
  • This listing covers MY's 1964-65 Lincoln Continentals with the stock V8.
    • Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
    • Waldron's does not offer any sound level options on these systems. OEM sound level only.
  • This listing covers MY's 1961, 1962, and 1963 Continentals with the stock V8.
    • Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
    • Waldron's does not offer any sound level options on these systems. OEM sound level only.
     
  • This listing covers MY's 1958, 1959, and 1960 Lincoln Continental Premiere's & Capri's with the stock V8. Photo depicts the dual exhaust for all models in 1958 with the stock V8 430ci. 
    • Dual exhaust system consists of the cross-over pipe, LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailspouts.
     
  • This listing covers model years 1955, 1956, and 1957 Capri and Premiere's stock with a V8 and dual exhaust. Photos depicts the stock dual exhaust for 1957 Lincoln Capri's and Premiers with the stock V8
    • For MY 1955 the stock dual exhaust consists of the LS front and rear exhaust pipe, RS exhaust pipe, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, & LS/RS tailpipes.
    • For MY's 1956-57 the system consists of LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS mufflers & LS/RS tailpipes. 1956 tailpipes are built to go into the bumper. 1957 tailpipes built with turndowns.
     
  • This listing covers MY's 1953 and 1954 Lincolns with the stock V8. Photo depicts the system for 1954 Lincolns with the stock V8
    • This single exhaust system consists of the crossover pipe, exhaust pipe, front muffler, center muffler, connector pipe, rear muffler and tailpipe.
     
    • This single exhaust consists of the crossover pipe (w/4blt flanges & 2"OD), exhaust pipe (w/4blt flange & 2¼"OD), front muffler, rear muffler and tailpipe (2"OD).
     
  • This listing covers model years 1949, 1950, and 1951 Lincoln's stock with a V8 and single exhaust with 1 muffler. Excludes 1949 EL convertible as we have no patterns.3 Photo depicts a 1949 Lincoln Cosmopolitan.
    • Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Lincoln Continentals with the stock V12. Photo depicts the system for 1940-48 Continentals stock with the V12 and a Hot Air Heater
    • Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
    • You will be asked report with or without hot air heater in the check out process.
    • 1940-48 MY's with the hot air heater will need to report the OD at the manifold.
     
  • This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Zephyr's. Photo depicts the exhaust system for 1938-48 Lincoln Zephyr with hot water heater.
    • For MY's 1936-37 this single exhaust consists of the cross-over pipe & Y pipe (2pc. Y pipe), center exhaust pipe, rear exhaust pipe, and muffler with short tailpipe.
    • For MY's 1938-48 this single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, and muffler with short tailpipe.
    This system has a water heater or a hot air heater between the front and center exhaust pipes (Waldron's does not provide this part). Let us know which type of heater your vehicle has in the check out process.

Title

Go to Top