- This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1936, 1937,1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 Nash Ambassador's with an OHV 6 engine. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. -
This listing covers model years 1936, 1937, 1938, 1939 & 1940 Nash Lafayette with a L-HE flathead 6. Photo depicts the single exhaust for 1940 Nash Lafayette with the stock L-Head 6cyl engine.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- This application does not have an exhaust manifold. The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's Exhaust does not carry the needed clamps.
-
This listing covers model years 1948, 1949, 1950 & 1951 Ford F4's, F5's, & F6's with the stock 6cyl engine. Photo depicts the stock single exhaust for 1948-51 Ford F4-F6's with the stock 6cyl engine.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers 1924, 1925, 1926, and 1929 Franklins with the stock 6 cyl. Photo depicts the stock single exhaust for 1924-26 Franklins with the stock 6 cyl.- This single exhaust system consists of a cross-over pipe, exhaust pipe, muffler and tailpipe.
- For 1927, 1928, & 1930-33 Franklin's, refer to listing 518776.
- For 1933 Olympics', models 18 or 18B, refer to listing 453478.
-
Photo is correct to the listing and fits 1929, 1930, 1931 & 1932 Jordan Model G 90 Series with the stock straight 8.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- This model has the 125"WB
- This system starts out at 2¼"OD and reduces down to 1¾"OD at the tailpipes.
-
This listing covers 1940, 1941, & 1942 Willys Americar with the stock 4cyl engine. Photo is correct to the listing.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers 1994, 1995 & 1996 Chevy Caprice Sedan's, Classic Wagon's, Impala SS' & Police Car with the stock 5.7L 350P V8 and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to this listing.- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers 1994, 1995 & 1996 Chevy Caprice Sedan's, Classic Wagon's, Impala SS' & Police Car with the stock 5.7L 350 V8 and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to this listing.
- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers 1994,1995 & 1996 Cadillac Fleetwood Brougham's with the stock 5.7L 350 V8 including Commercial Chassis and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to the listing.
- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers model years 1929, 1930, and 1931 Model A's. Photo depicted is correct to the listing.- This is a one piece unit and consists of the exhaust pipe, tapered muffler and tailpipe. Available in aluminized steel, only.
- Exhaust pipes does not take a flange, it has a flare that uses a special nut which is not provided.
-
This listing covers 1968, 1969, 1970, 1971 & 1972 Buick Skylark & Special's with the introduction of the Century & Regal's in 1973 & 1974 stock with a V8 and single exhaust.- Stock single exhaust system consists of the Y pipe, rear exhaust pipe, muffler & tailpipe. Metal-to-metal connection at the manifolds, no gaskets required.
-
Photo depicts the system for this listing.- The single exhaust for the Super 6 consists of exhaust pipe, muffler and tailpipe. The exhaust pipe is 2"OD and reduces to 1¾"OD at the tailpipe.
- Exhaust pipe will come with a steel 3blt flange. The original was cast iron. If you have the original cast iron flange and would like to reuse it, you will need to send it to us in advance of the system being built.