-
This is a set of 4 OEM correct hangers for MY's 1959 and 1960. These hangers are used at the muffler outlets and on the frame rail prior to the rear axle. This set does not include the hangers needed at the rear. Hangers generally will ship within 1 wk. -
- This single exhaust consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
-
This listing covers 1959 & 1960 Edsel Ranger, Corsair, & Villager Station Wagon's with the stock V8. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- For MY 1959 the single exhaust system consists of the Y pipe, muffler and tailpipe.
- For MY 1960 the single exhaust system consists of the Y pipe, rear exhaust pipe, and muffler with tailpipe.
-
This listing covers 1959 & 1960 Edsel's (exc. 1960 convertible) with the stock 6 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- For MY 1959 the single exhaust consists of the exhaust pipe, muffler, and tailpipe. Listing covers all body styles.
- For MY 1960 the single exhaust consists of the front exhaust pipe, rear exhaust pipe, and muffler with tailpipe. Listing excludes Edsel convertibles.
-
This listing covers model years 1959 and 1960 Bel Air, Biscayne, and Impala's with the stock V8 283ci, 348ci or 348HP and a dual exhaust with 2 mufflers and 2 resonators. Photo depicts the stock dual exhaust system for 1960 9Passenger SW's with the stock non-HO 348ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1959 and 1960 Chevy Full Size Bel Air, Biscayne and Impala with the stock dual exhaust but with the stock resonators eliminated. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators eliminated, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.
-
- This single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, resonator w/long inlet pipe, and tailpipe.
-
This listing is for all body styles 1959 Pacer, Ranger, Citation, and Corsair's with the stock V8 and dual exhaust. Photo depicts the exhaust system for 1959 Edsel's, except convertibles and station wagons.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes. From the factory, these tailpipes were all in 1 piece but are so long that they must be reproduced in 2 sections.
-
Photo depicts the system for MY 1959 Invicta and LeSabre.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS rear mufflers with tailspouts.
-
Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe. Y pipe will be NORS only.
-
This listing covers model years 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965 & 1966 American's with stock the L Head cyl. Photo depicts the system for 1965-66 American's with the stock 6 cyl L head.- Single exhaust system consists of an exhaust pipe, muffler and tailpipe.
- Waldron's does not provide the clamps needed to attach the manifold pipe to the engine nor do we have the needed gasket available. Give us a call for contacts, if needed.
-
This listing covers model years 1958, 1959, 1960, 1961, 1962, and 1963 Thunderbird's with the stock V8 and dual exhaust with 2 mufflers. This listing is the stock set up for 1962 Thunderbird's with a 6 bbl carburetor. For the stock set up 1962 Thunderbird's stock with a 4 bbl carburetor and for MY 1961 refer to 518725. If you have a 1961 and want to eliminate the resonator, this is the listing to be used. Photo depicts the dual exhaust system for 1963 Ford Thunderbirds with the stock V8- Dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, and LS/RS mufflers with tailpipes.
- MY 1963 will be asked to report the type of gasket needed (flat or donut) in the check out process.
Questions? Call Us Today! (269) 467-7185 or (800) 503-9428
