- Dual exhaust system for the 2 WD C Series consists of LS/RS exhaust pipes, LS/RS mufflers, & LS/RS tailpipes.
- Dual exhaust system for the 4 WD K Series & Suburban's consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers & LS/RS tailpipes.
-
This listing covers MY's 1975, 1976, 1977, and 1978 Chevy C10, K10, C20, K20, C30, K30 & Suburban's with the stock 350ci, 400ci, & 454ci. For 1975-78 Suburban's with the 454ci this is a resonator eliminator option since all were stock with resonators. Photo depicts the stock dual exhaust for 1975 Chevy C10's with the stock 454ci. -
This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 GMC's with the stock 6 cyl 228ci or 248ci.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- This exhaust pipe will not come with the cast iron flange. You will need to reuse your flange. Nor do we have a gasket available.
- The OE muffler hanger, available in checkout, is for MY's 1941-53. It is not OE correct for MY's 1939-40. Currently NA
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 GMC 1½T's with the stock 6 cyl. Photo depicts the single exhaust system for 1955-58 GMC truck models 100-24, 150-24, 250-24 & PM250-24 with the stock 6 cyl- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Flange is not included with this exhaust pipe. Reuse original cast iron flange (if possible).
-
Photo is correct to the listing.- 1962 & 1963 Olds Jetfire Turbo 2nd Design single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, connector pipe (AKA over-axle pipe), single in/dual out transverse muffler, and LS/RS tailpipes.
- Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
-
This listing covers MY's 1961, 1962, 1963, and 1964 Mercury Monterey's, Commuter's, Colony Park's, and Montclair's with the stock V8 292ci, 352ci, 390ci, 406ci, & 427ci. For convertibles go to see listing 453451. Photo depicts the stock dual exhaust system for 1963 Mercury Monterey's & Colony Park's with the stock 390ci V8, except for convertibles.- System consists of the H pipe, LS/RS rear exhaust pipes, and LS/RS mufflers w/hanger bracket and tailspout welded into the proper position.
-
This listing covers MY's 1962, 1963 Mercury Meteor's & 1963, 1964, & 1965 Comet (including Cyclone and Caliente's) with their respective stock V8; 221ci, 260ci, or 289ci. 1965 . Photo depicts the system for 1965 Comet's.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailspout. Y pipe may be NORS.
- Comet's with the 4bbl carburetor were stock from the factory with a resonator built into the tailpipe. Waldron's does not have the needed pattern for the 4bbl set-up, so this listing is a resonator delete system.
-
This listing is for 1988 Mercury Cougars stock with the 302ci. Photo depicted is correct to the listing.- This single-into-dual exhaust system starts behind the converter. This consists of the NORS Y pipe (sits like a wishbone), LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1966, 1967, 1968, & 1969 Pontiac Custom, GTO, Lemans, & Tempest with Ram Air or High Output, 1970 models with Ram Air, and 1971-72 models with High Output. If your MY 1966, 1967, or 1969 was stock with 4 mufflers, refer to listing 453477. For systems w/o RA or HO, refer to listing 453210. Photo depicts the stock dual exhaust system for 1967 Pontiac Lemans, Tempest, and Custom with RA or HO manifolds on the stock 400ci V8 & standard transmission (this is a resonator eliminator system for 1967 GTO's with RA or HO & STD trans).- This dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2¼"OD on the exhaust pipes which reduce to 2"OD at the muffler inlets and then increases to 2¼" OD at the tailpipes.
- For MY's 1970-72, this system does not include the chrome tips but will be designed to fit up to the stock tip design.
- If the cast iron flanges are needed, add them to your cart for an additional $45.00.
- Metal-to-metal connection at the manifolds. Gaskets are not required.
-
Out of stock
This muffler hanger is used on most 1941-66 Chevy trucks and on 1959-66 GMC trucks & vans. The strap is made of stainless steel. Currently unavailable. -
Waldron's Exhaust reproduces this OE correct muffler hanger used at the outlet end of the resonator. Used in 1972 & 1973 by Ford on the Thunderbird and by Lincoln on the Mark IV. Hangers generally ship out within 1 wk. -
This listing is for 1975 CJ-5's and CJ-6's with the stock V8 without a converter (not for CJ's that were stock with converter). Photo depicts the single exhaust system offered stock without a catalytic converter for 1975 CJ5's with the stock V8 304ci.- This system consist of the Y pipe, rear exhaust pipe, muffler, and tail pipe.
-
This listing covers MY's 1932, 1933, 1934 & 1935 Lincoln K Series stock with the V12. Photo depicts the stock single exhaust for 1932-33 Lincoln K Series with the stock V12- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Original exhaust pipe was 2¾"OD. In reproduction it will be 2"OD flared to 2¾"OD with a flat flare. We do not have the needed gasket available or the proper flange for this connection. If you have the original cast iron flange, you will want to reuse it.