- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1957-60 models with wheel carriers, the tailpipes will be in 2 sections due to length (unable to build in 1 full 10 ft. pc. of tubing).
- In the check out process you will be asked to report whether your vehicle was stock with or without a wheel carrier.
-
This listing covers model years 1958, 1959, 1960, 1961 & 1962 Rebels, Ambassadors, and Classic with stock dual exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. -
This listing covers model years 1980, 1981, 1982, 1983, 1984, 1985, 1986, and 1987 Buick Century and Regal's with 3.8L turbo. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- 1980 models consists of Y pipe (AKA rear exhaust pipe), LS/RS mufflers, and LS/RS tailpipes.
- 1981-83 models consists of Y pipe (AKA center exhaust pipe), RS rear exhaust pipe, LS/RS mufflers (mufflers do not sit parallel of each other) and LS/RS tailpipes.
- 1984-87 models consist of Y pipe (AKA center exhaust pipe), LS/RS rear exhaust pipes, LS/RS connector pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
- Metal-to-metal connection at the converter, no gaskets required.
- All or some parts may be NORS on these systems.
-
This listing covers model years 1973 and 1974 Chevelle, Malibu, and Monte Carlo's with a stock dual exhaust with mufflers (only). Photo depicts the stock dual exhaust for 1973 Chevelle and Malibu's with 2 drs. (4 dr. systems take different exhaust pipes) & the stock 350ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, and 1961 Desoto's stock with a V8 and dual exhaust. Excludes 1955 Desoto convertibles which were stock with a single exhaust. This listing does cover 1956 Desoto convertibles which were stock with mufflers only (no resonators). For MY's 1957-61 convertibles this would be a resonator delete system. If you would like to have the true OE system for your 1957-61 convertible, please refer to 538704 which has mufflers and resonators. Photo depicts the dual exhaust for 1958-59 Firesweep, Firedome, and Fireflite's except convertibles and station wagons.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds F85 and Cutlass' with the stock V8 stock dual exhaust or for MY's 1965-74 you may convert your single exhaust to a dual exhaust. We will supply you with the needed blocker plate. For MY 1964 this dual exhaust is for F85's /4-4-2 STOCK with a dual exhaust. We do NOT offer a single-to-dual conversion. If your 1964 Cutlass/F85 was stock with a single than we can help you out with a single exhaust (only). Photo depicts the system for a 1971 Cutlass 4-4-2 with the stock 455ci engine.- This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- You will be asked to report the stock set-up in the the check out process.
- 1964-67 models will be required to report the inside diameter of the driver side manifold.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Road Runner, Belvedere, and Satellite's with the stock 383ci, 340ci or 400ci V8 & dual exhaust. 1970-74 Plymouth Fury's refer to SKU 438521. This listing excludes 1971-74 models with the 440ci. The OE exhaust pipes for the 440ci were never reproduced in the after-market world. We can help you out with mufflers and tailpipes (only). If you have original exhaust pipe for the 440ci, contact us at 800-503-9428. The 318ci V8 was stock with a single exhaust only. Photo depicts the stock dual exhaust for 1970 Plymouth Belvedere's, Satellite's & Road Runners with the stock 383ci & 4BBl carburetor where customer selected tailpipes to exit for chrome tips.- Dual exhaust varies between model names, body styles and engines. Some systems consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes while others have LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1970, 1972, 1973, and 1974 Fury's that were stock with a dual exhaust. No dual exhaust available for a 318ci or a 360ci V8, stock single exhaust only. Photo depicts the stock dual exhaust for 1973 Plymouth Fury's with the stock 440ci.- On some models this dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes while other models have a LS/RS front exhaust pipe, LS/RS rear exhaust pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1961, 1962, 1963, and 1964 Star Chief, Bonneville, Catalina, and Grand Prix's (1962-64) with the stock V8 except 421HO and a dual exhaust. We are no longer offering the dual exhaust system for 1963-64 Pontiac full-size with the 421HO engine. Photo depicts the system for full size Pontiac's with the stock 389ci.- Dual exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- MY's 1963-64 do not require gaskets at the manifolds. The connection is metal-to-metal.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Calais, Deville and Fleetwood's with a V8 and stock single exhaust. Excludes diesel engines. Photo depicts the system for 1975-76 Calais' and Deville's. Photo does not show the catalytic converter which is located between the Y (AKA front exhaust) pipe and rear exhaust pipe and must be in place for system to fit properly.- This single exhaust system consists of front (Y) exhaust pipe, rear exhaust pipe, front muffler, connector pipe, and resonator w/tailspout.
-
This listing covers MY's 1953 and 1954 Corvette's with the stock 6cyl. Photo depicts the stock dual exhaust system for 1953-54 Corvette's with the stock 6cyl.- Both exhaust pipes start off on the driver side with the RS pipe crossing over (with a 90° bend) behind the engine to the passenger side, where it turns 90° again to connect to the muffler, both LS/RS mufflers come with long inlet and outlet pipes, then we have the LS/RS tailpipes. We provide a 2 bolt flange but it is best to reuse the original cast iron flange (if possible).