- This single exhaust system consists of the exhaust pipes (1&5/8 OD), dual in/single out resonator (AKA mixing box), connector pipe (2" OD), transverse muffler, and tailpipe (1¾" OD).
- Waldron's Exhaust does not supply flanges with these exhaust pipes. Original flanges are cast iron. Keep and reuse your cast iron flanges.
-
This listing is for MY's 1940 and 1941 Graham Supercharged 6 cyl. engine. Photo is correct to the listing. -
This listing covers MY's 1955 and 1956 Packard Patrician, Caribbean, 400, Executive, Clipper Super, & Custom's with the stock V8. Excludes 1955 Packard convertibles which we do not have the needed patterns to reproduce at this time. Photo depicts the dual exhaust system with resonators for a 1956 Packard Patrician or Caribbean with the stock V8- Dual exhaust consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes with resonators built in.
- Waldron's does not offer a "with cut pipes" option on this dual exhaust.
-
This listing covers MY's 1933 & 1934, models 1005, 1006, 1107, 1108, 1935 models 1207 & 1208 & 1936 models 1407 & 1408 Packard's with the stock V12 and a 1 muffler single exhaust.- Waldron's Exhaust offers the muffler (long body length) and tailpipe. You will need to make the connection from the manifold to the muffler inlet.
-
This listing covers MY's 1931 models 840 & 845, 1937 models 120C, 120D, 138CD, 1500, 1501, 1502 Super 8 and 1938 Super 8 Packard's. Photo depicts the system for 1937 Packard's (120C, 120CD, 138CD) stock with the 8 cyl. engine.- This single exhaust consists of the exhaust pipe, muffler, resonator w/connector pipe at inlet end (trim to fit), and tailpipe.
-
This listing covers MY's 1957, 1958, 1959, 1960 ,1961, 1962/ 1963, 1964, 1965, and 1966 Chrysler Imperials. MY 1959 - we will need to know your VIN due to mid-year change. MY's 1959-61 - we will need to know type of suspension. Photo depicts the system for 1962-66 Chrysler Imperials.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailpipes.
- When installing the system for 1957 and 1958 Imperial's (except convertibles and 4 dr. hardtops) the transmission crossmember will need to be removed in order to install the resonators.
-
These split chrome tips have a 2.25" ID and are designed to slip over your 2.25" tailpipe and are to be welded on. These are the tips to purchase for your Firebird. Tips generally will ship within 1 wk. -
These chrome Pencil Tips are designed to be welded on and are approximately 9" in length. They are available in 1½" ID, 1¾" ID, 2" ID, 2¼" ID & 2½"ID for $15.00 (per). Available with 3" for $30.00 (per). Tips generally will ship within 1 wk. -
This chrome turndown tip is cut parallel to the ground and is approximately 9" in length. Designed to fit over your tailpipe and weld in place. Available in 1½"ID, 1¾" ID, 2" ID & 2¼" ID for $20.00 (per), 2½" ID for $30.00 (per), and 3" ID for $50.00 (per). Tips generally will ship within 1 wk. -
These chrome tip run straight out with a 45 degree angle cut and designed to slip over your tail pipe and be welded in place. Tips are approximately 9" in length. Available in 1½"ID, 1¾" ID, 2" ID, & 2¼" ID for $15.00 (per). Available in 2½"ID for $20.00 (per). Tips generally will ship within 1 wk. -
This listing covers MY's 1976, 1977, 1978, 1979 & 1980 Jeep CJ-5's and CJ-7's with stock 304ci. This system was stock with a catalytic converter and the converter must in place for system to fit. If you are in need of a new direct fit catalytic converter, you may add it to your cart (for an additional $335.00) in the check out process. Photo depicts the system for 1977-78 CJ-7's with the stock 304ci (shown with the converter that we supply in place).- Single exhaust will consist of the Y pipe, muffler, and tail pipe. Stock converter sits between the Y pipe and muffler.
-
This listing is for 1975 CJ-5's and CJ-6's with the stock V8 without a converter (not for CJ's that were stock with converter). Photo depicts the single exhaust system offered stock without a catalytic converter for 1975 CJ5's with the stock V8 304ci.- This system consist of the Y pipe, rear exhaust pipe, muffler, and tail pipe.
-
This listing covers MY's 1966, 1967, 1968, 1969, 1970, and 1971 Jeep CJ-6, CJ-6A, & DJ6 with the stock V6 225ci engine. Photo depicts the system for 1966-71 CJ-5, CJ-5A, & DJ-5's with the stock V6 225ci. The rear exhaust pipe is longer on the CJ-6's.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.