- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Exhaust pipes originally used cast iron flanges. We do not have them available and no flanges will come with the system.
- MY 1930 exhaust pipe is stock 2¼" and reduces to 1¾" at the muffler outlets.
- MY's 1931-32 exhaust pipe is stock at 2½" and reduces to 1 7/8" at the muffler outlets.
-
This listing covers model years 1930, 1931, 1932 & 1933 Cadillac's stock with dual exhaust and their respective stock V12 or V16. Photo depicts the stock dual exhaust for 1931-33 Cadillac Models 370A, 370B & 370C with the stock V12. -
This listing covers model years 1949, 1950, and 1951 Cadillac's with the stock V8. Photo depicts the system for 1949 Cadillac's.- Single exhaust system consists of the cross-over pipe (manifold to manifold), exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Cadillac's. The cross-over portion of this system is part of the manifold. Photo depicts the system for a 1941 Fleetwood.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- If you do not have the original cast iron 4 bolt flange, you may add a non-cast iron 4blt flange to the order.
-
This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1938, 1939, and 1940 Cadillac's with the stock single exhaust stock with 1 muffler. Excludes Model 65. MY's 1936 & 1937 V8's are stock with muffler & resonator. Photo depicts the single exhaust system for 1932-33 Cadillac's with the stock V8- For MY's 1928-31 the single exhaust system consists of exhaust pipe, muffler and tailpipe. You will be asked to report the angle of your manifold in the check out process.
- For MY’s 1932-33 the single exhaust system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Trimming may be required to fit exhaust pipe to the manifold. OE system was flanged connected between front and rear exhaust pipes but our system will be a “slip-fit” design. Waldron’s does not offer a gasket for this system.
- For MY's 1934-40 the single exhaust system consists of exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1934, 1935, 1936, 1937, 1938, 1939, and 1940 LaSalle's. For MY 1936 this is a resonator eliminator option as all 1936 LaSalle's were stock with 2 mufflers. For the OE correct system for 1936 refer to 578829. Photos depict the system for MY's 1937 & 1938 LaSalle- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- 1934-36 MY's will have the 2 bolt flange welded in place and you will need to report the wheel base at check out.
- 1937-40 MY's originally had a 4 bolt cast iron flange which we do not offer. Reuse your original, if possible. If you no longer have the original cast iron flange, Waldron's offer's a non-cast iron 4blt flange. Simply add it to your cart below.
-
This listing covers model years 1927, 1928, 1929, 1930,1931, 1932 and 1933 LaSalle's with the stock 8 cyl.- For MY's 1927-31 this single exhaust system consists of exhaust pipe (w/3 bolt flange), muffler, and tailpipe. You will be asked to report how your manifold exits in the check out process.
- For MY's 1932-33 this single exhaust system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Trimming may be required to fit exhaust pipe to the manifold. OE system was flanged connected between front and rear exhaust pipes but our system will be a "slip-fit" design. Waldron's does not offer a gasket for this system.
-
This listing covers model years 1920, 1921, 1923, 1924, 1925, 1926, and 1927 Cadillac's stock with dual exhaust.
- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. You will want to utilize the original cast iron flanges.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 Buick Riviera, LeSabre, and Electra's with a V6 or a V8 and a 2 muffler single exhaust. This listing does not cover models with diesel engines. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single cat-back system consists of the center exhaust pipe, rear exhaust pipe, muffler, connector pipe, rear muffler, and tailpipe.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, and 1989 Buick LeSabre, Electra and Riviera's. Listing does not cover models with diesel engines. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Cat-back system consists of the center exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, front tailpipe and rear tailpipe.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 LeSabre and Electra's with a V6 or a V8 1 muffler single exhaust system. Listing does not cover diesel engines or CA models. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single cat-back exhaust system consists of rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 full size Buick's with diesel engines and a 2 muffler single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This single cat-back exhaust system consists of LS/RS front exhaust pipes, center (Y) exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 Full Size Buick's with a diesel engine and a 1 muffler single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This single cat-back exhaust system consists of front exhaust pipe, center exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Parts may be NORS.