Shop

  • This listing covers MY's 1965, 1966 and 1967 Mustangs stock with a 6 cyl. In 1967 the Mustang stock with the 200ci 6cyl engine was also offered stock with a resonator. If you would like that system, refer to listing 518738. Photo depicts the stock single exhaust for 1965-66 Ford Mustang with the stock 170ci or 200ci 6cyl. 
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers MY's 1956 with either the 292ci or the 312vi V8 and 1957 Ford Thunderbirds with the 312ci V8. The 292ci did not come stock with resonators. Refer to listing 518899 for a '57 T-bird with a 292ci or if you want to delete the resonator. Photos depicts the exhaust pipes and mufflers for 1956 and 1957 Thunderbirds, the front and rear tailpipes vary depending on engine and transmission.
    • This dual exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS tailpipes.
  • 1955 Thunderbird Dual Exhaust

    $624.00$1,092.00
    Photo shown is correct to the listing.
    • Dual exhaust system consists of LS/RS exhaust pipe, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
  • This listing covers MY's 1965 and 1966 Dodge Darts stock with the 273ci V8 and 4 BBL carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212.  Photo is correct to the listing. 
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
    • Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system. 
  • This listing covers model years 1957, 1958, and 1959 Dodge convertibles. Photo depicts the stock dual exhaust for 1959 Dodge convertibles. 
    • Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS rear mufflers, and LS/RS tailpipes.
  • This listing covers 1960 and 1961 DeSoto's with the Ram Induction set up. Photo depicted is for a 1960-61 Chrysler and is posted here since these systems are very similar in configuration (but require different parts).
    • Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes along with the 1&1/8" clamps needed at the preheater tubes.
  • This listing covers model years 1951, 1952, 1953, and 1954 Chrysler Windsor with the stock 6 cyl. Photo depicts the 6 cyl single exhaust for 1953-54 Chrysler Windsor's 
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Imperial and Crown Imperial's and 1942, 1943, 1944, 1945, 1946, 1947, and 1948 C36/C39 New Yorker and Saratoga convertible coupe. Photo depicts the system for 1942-48 Chrysler Town & Country convertibles.
    • Single exhaust system consists of the exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe.
  • This listing covers model years 1971, 1972, 1973, and 1974 Vega's with the stock 4 cyl. Photo depicts the system for 1974 Vega's. MY's 1971-73 require the same exhaust pipe but the system varies after that. 
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, single in/single out transverse muffler, and tailpipe.
  • This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, and 1984 Camaro's with the stock 6 cyl and start after the catalytic converter. Photo depicts the single cat-back exhaust for 1980 Camaro's with the stock 229ci 6cyl (the 231ci requires a different rear exhaust pipe). 
    • Single cat-back system consists of the rear exhaust pipe, single in/single out transverse muffler and tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
     
  • This listing covers model years 1970, 1971, 1972, 1973, and 1974 Camaro's with the stock V8 and single exhaust. Photo depicts the stock single exhaust system for 1971-73 Camaro's with the stock V8. 
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1967, 1968, and 1969 Camaro's with a V8 and stock single exhaust. Photo depicts the system for MY 1967.
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevelle, Malibu and El Camino's with a stock 6 cyl. Photo depicts the stock single exhaust for 1968 Chevy 4dr Chevelle's, 300's, and Malibu's with the stock 6cyl (2drs take a shorter exhaust pipe). 
    • Single exhaust system consists of exhaust pipe, muffler and tailpipe.
     
  • This listing covers model years 1963, 1964, 1965, 16966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevy II and Nova's with a V8 and stock single exhaust. Photo depicts the stock single exhaust for 1965-67 Chevy II's with the stock 327ci. 
    • Single exhaust system consists of the Y pipe, muffler and tailpipe. Y pipe may be NORS.
  • This listing covers model years 1965, 1966, 1967, 1968, and 1969 Bel Air, Impala, and Caprice's V8 stock with dual exhaust with mufflers and resonators. In these MY"s, all body styles and all engines, except the 396SHP and the 427SHP, were stock with resonators. See listing 588616 if you have the SHP 396ci or 427ci or if you would like to eliminate the resonators from your system. Photo depicts the dual exhaust for 1969 Bel Air, Biscayne, Caprice & Impala's with the stock 396ci or 427ci V8.  
    • Dual exhaust system consists LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes with bullet style (3½" body diameter)  resonators (oval style NA).
  • This listing covers model years 1965, 1966, and 1967 Bel Air, Impala, Biscayne, Super Sport, and Caprice's with the stock V8. MY 1967; this is OE correct for all engines. MY's 65-66; this is OE correct for the 283ci and a resonator eliminator option for the 327ci & 396ci (which were stock with resonator). Photo depicts the stock single exhaust system for 1965-66 Chevy Full Size with the stock 283ci V8 (stock without a resonator). 
    • Single exhaust system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
    • For MY's 1965-67 stock with the 283ci; we will need you to report the desired tailpipe exit in the check out process. 
     
  • This listing covers model years 1961, 1962, 1963, and 1964 Chevy Impala, Bel Air, Biscayne, and Super Sport's stock with the V8 283ci, 327ci (small or big block), 348ci (small or big block), and 409ci (big block) with the a stock dual exhaust (which was stock w/2 resonators). Photo depicts the system for MY's 1960-64 Chevy full size stock with the small block 283ci or 327ci. 
    • Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
    • Big Block engines will have an additional $40.00 cost added to system price. 
    • Our pattern exhaust pipes have the piece that some call an extension (we call it an insert) incorporated into the exhaust pipes. If you would prefer to have the insert/AKA extension a separate part, you may choose so in the check out process.
  • This listing covers model years 1949,1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevrolet Bel Air, Impala, Biscayne, Delray and Nomads with 6 cyl. Photos depicts the system for MY's 1953-54 Chevy's with the stock 6 cyl.
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
    • For MY's 1965-68; you will need to report the desired tailpipe exit in the check out process. 
  • This listing covers model years 1967, 1968, 1969, and 1970 Eldorado's with a stock dual exhaust. Photo depicts the system for 1970 Eldorado's 
    • Dual exhaust system consists of LS/RS front, LS/RS rear exhaust pipes, dual in/single out transverse muffler, and LS exit tailpipe with resonator.
  • This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1938, 1939, and 1940 Cadillac's with the stock single exhaust stock with 1 muffler. Excludes Model 65. MY's 1936 & 1937 V8's are stock with muffler & resonator.  Photo depicts the single exhaust system for 1932-33 Cadillac's with the stock V8
    • For MY's 1928-31 the single exhaust system consists of exhaust pipe, muffler and tailpipe. You will be asked to report the angle of your manifold in the check out process.
    • For MY’s 1932-33 the single exhaust system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Trimming may be required to fit exhaust pipe to the manifold. OE system was flanged connected between front and rear exhaust pipes but our system will be a “slip-fit” design. Waldron’s does not offer a gasket for this system.
    • For MY's 1934-40 the single exhaust system consists of exhaust pipe, muffler and tailpipe.
     
  • This listing covers model year 1962, 1963, and 1964 LeSabre, Wildcat, and Electra's with stock V8 and dual exhaust. Photo depicts the system for a 1963 Buick Wildcat / LeSabre. Pipes will vary depending on transmission and body style. 
    • Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS front connector pipes, LS/RS rear connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gaskets required at the manifolds. These systems DO require gaskets at the muffler inlets & may be added to your cart.
     
  • This listing covers model years 1960, 1961, 1962, 1963, and 1964 LeSabre, Invicta, Electra, and Wildcat's with a V8 and stock single exhaust. Photo depicts the system for 1962 Electra and Electra 225 stock with a single exhaust. 
    • Single exhaust system includes Y pipe, center exhaust pipe, rear exhaust pipe, transverse muffler and tailpipe. Y pipe may be NORS. Metal-to-metal connection at the manifolds, no gaskets required.
  • Photo depicts the system for MY 1959 Invicta and LeSabre.
    • Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS rear mufflers with tailspouts.
     
  • This listing covers model years 1956, 1957, and 1958 Century, Special and Super's. Photo depicts the system for a 1956 Buick Special Model 41 (with the tailpipe cut) 
    • Single exhaust system consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1941, 1942, 1943, 1944, 1945, and 1946 Buick with the straight 8 and dual carburetors. This listing is for MY's 1941-46 with the dual carburetor set up. If your 1941-46 Buick was stock with a single carburetor set-up, refer to listing 568791. Photo depicts the system for a 1941 Buick Super with dual carb set up.
    • System consists of extension pipe, front exhaust pipe (AKA Y pipe), rear exhaust pipe, muffler, and tailpipe.
     
  • This listing covers the model year 1953 Buick Specials with the straight 8. Photo depicted is correct to the listing.
    • Single exhaust system includes exhaust pipe, muffler and tailpipe. Due to muffler length, this muffler is built in 2 pcs. and will have a bead weld around the center of the muffler. 
     
  • For Packard MY's 1957 and 1958  Clippers, Hawks, Golden Hawks & Luxurys.
    • Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS muffler assembly, and LS/RS tailpipes.
    • Shipping full length is the only option under this listing.
  • This listing covers 1949, 1950, 1951, 1952. 1953 & 1954 Henry J's with the stock 4 cyl or 6 cyl engine. Photo depicts the stock single exhaust for 1951-54 Henry J's with the stock 6cyl. 
    • This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
  • This listing covers 1972, 1973 & 1974 Chrysler New Yorker's, Newport's & 300's stock with a dual exhaust system and the stock engine. Photo depicts the stock dual exhaust for all 1974 Chrysler Full Size with the stock V8. 
    • This dual exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
     
  • This listing covers 1966 & 1967 Pontiac Leman's & Tempest's stock with the OHC 230ci 6cyl and a 4BBL carburetor. If you would prefer to eliminate the resonator, refer to SKU 453213. Photo depicts the stock single exhaust for 1966-67 Leman's & Tempest's with the stock 230ci 6cyl and the 4bbl carb. 
    • This single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, connector pipe, and resonator with tailspout.
  • This listing covers 1955 Cadillac models (except for S60 Fleetwood's which are stock with resonators, only) with the stock 331c V8 that were stock without resonators. Photo is correct to the listing.
    • This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
  • This listing covers MY's 1932, 1933, 1934 & 1935 Lincoln K Series stock with the V12. Photo depicts the stock single exhaust for 1932-33 Lincoln K Series with the stock V12
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Original exhaust pipe was 2¾"OD. In reproduction it will be 2"OD flared to 2¾"OD with a flat flare. We do not have the needed gasket available or the proper flange for this connection. If you have the original cast iron flange, you will want to reuse it. 
     
  • This listing covers MY's 1925, 1926, 1927, 1928, 1929, 1930, 1931, and 1932 Oldsmobile's with the stock 6 cyl. Photo depicts the stock single exhaust for 1931 Oldsmobile F31 with the stock 6cyl. engine.
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Waldron's does not have the needed gasket available. 
  • Listing covers 1975, 1976, & 1977 Ford Maverick's with the stock 6 cyl or V8 and begins behind the converter. Photo depicts the stock cat-back single exhaust for 1977 Ford Mavericks with the stock 250ci 6cyl with the 12" catalytic converter. 
    • Cat-back system consists of the rear exhaust pipe, resonator, connector pipe, and muffler w/tail spout.
    • MY 1977 will need to report stock catalytic converter body length (7¼" or 12") in the check out process.
    • If you are in need of the pipes forward of the converter and/or the converter, please give us a call for availability and pricing. 
  • Covers MY's 1971, 1972, 1973, & 1974 Maverick's with the stock V8 single exhaust with muffler & resonator.
    • System consists of the front exhaust pipe (AKA Y pipe), center exhaust pipe w/resonator, rear exhaust pipe, & muffler w/tail spout. Y pipe may be NORS. 
  • This listing is for MY's 1940 and 1941 Graham Supercharged 6 cyl. engine. Photo is correct to the listing. 
    • This single exhaust system consists of the exhaust pipes (1&5/8 OD), dual in/single out resonator (AKA mixing box), connector pipe (2" OD), transverse muffler, and tailpipe (1¾" OD).
    • Waldron's Exhaust does not supply flanges with these exhaust pipes. Original flanges are cast iron. Keep and reuse your cast iron flanges.

Title

Go to Top