- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, and 1952 Plymouth's Deluxe, Concord, Cambridge, Belvedere, Savoy and Cranbrook's with the stock 6 cyl engine. Photo depicts the system for MY's 1949-52 Plymouths with the stock 6 cyl. -
This listing covers model years 1938, 1939, 1940, 1941, and 1942 Packard's with a stock 6 or 8 cyl. Photo depicts the system for a 1939 Packard with the stock 6 cyl.- Single exhaust system consist of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979 Delta 88 and Royale's with a 6 cyl or a V8. Excludes models with a 455ci, diesel or a station wagon. Photo depicts the stock cat-back single exhaust for 1975 Delta 88's with the stock 350ci.- Single cat-back system consists of the rear exhaust pipe, muffler, and tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds 88, 98, Delmont, Jetstar, and Delta's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for a 1971 Olds Custom Cruiser SW with the stock V8 (455ci).- Single exhaust system consists of crossover pipe, exhaust pipe, front muffler, over-axle pipe, and rear muffler with tailpipe.
-
This listing covers model years 1961, 1962, 1963, and 1964 Olds 98, 88, Jetstar, Dynamic, and Super's with the stock V8 and a 2 muffler single exhaust system. Photo depicts the stock single exhaust for all models (except 98's and station wagon's) with the stock V8. Photo shows cross-over, front exhaust pipe, rear exhaust pipe & muffler being NORS parts.- Single exhaust consists of the crossover pipe, front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, and rear muffler with tailpipe.
-
This listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988 and 1989 Lincoln Town Car's and 1982 & 1983 Lincoln Continental Mark VI's with the stock V8 302ci and dual exhaust with mufflers and resonators. 2dr. models only. Photo depicts the stock dual cat-back system for 1982-88 Lincoln Town Car's & Mark VI's 2drs. with the stock 302ci. All parts in photo are NORS.- This dual exhaust system starts behind the catalytic LS/RS converters and consists of the H pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator w/tail spout.
- All or some parts may be NORS.
- System is 2" OD throughout.
- H pipe is NA for 4 dr. systems. Contact us if you have an OE H pipe on your 4dr. system and let's see what we can do for you.
-
This listing covers model years 1955, 1956, and 1957 Capri and Premiere's stock with a V8 and dual exhaust. Photos depicts the stock dual exhaust for 1957 Lincoln Capri's and Premiers with the stock V8- For MY 1955 the stock dual exhaust consists of the LS front and rear exhaust pipe, RS exhaust pipe, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, & LS/RS tailpipes.
- For MY's 1956-57 the system consists of LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS mufflers & LS/RS tailpipes. 1956 tailpipes are built to go into the bumper. 1957 tailpipes built with turndowns.
-
This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Zephyr's. Photo depicts the exhaust system for 1938-48 Lincoln Zephyr with hot water heater.- For MY's 1936-37 this single exhaust consists of the cross-over pipe & Y pipe (2pc. Y pipe), center exhaust pipe, rear exhaust pipe, and muffler with short tailpipe.
- For MY's 1938-48 this single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, and muffler with short tailpipe.
-
This listing covers 1953 and 1954 Darrin's with the Small 6. Photo depicts the system for a 1954 Kaiser (with the SN 20141). Our system’s come with a conventional 4″ muffler.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, and muffler with tailpipe.
-
Listing covers model years 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, and 1951 Hudson's. Photo depicts the stock single exhaust for 1950 Hudson Pacemaker & 500's with the stock 6 cyl. engine.- For MY's 1924-47 the single exhaust system consists the exhaust pipe, muffler and tailpipe.
- For MY's 1948-51 the system consists of the front exhaust pipe, rear exhaust pipe, muffler with tailpipe.
-
This listing covers model years 1975, 1976, 1977, and 1978 LTD and Crown Vic's with the 460ci (only). Photo depicts the stock cat-back dual exhaust system for 1977-78 Ford full size passenger cars with the stock 460ci V8.- Dual cat-back exhaust consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers 1975 & 1976 Mustang's stock with a V6 171ci or a V8 302ci and were stock with catalytic converters. Photo depicts the dual exhaust system for 1975 Mustangs with the stock 302ci V8 and stock with 2 catalytic converters.- The V6 171ci dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- The V8 302 dual exhaust consists of the LS front exhaust pipe (AKA extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- This set up does not eliminate the converters and they must be in place. Waldron's Exhaust cannot help with replacement converters.
-
This listing covers MY's 1974 Mustang's with the stock V6 171ci and 1975 Mustang's stock with the V8 302ci that were stock without catalytic converters. Photo depicts the system for a 1974 Mustang with the stock V6 171ci.- 1974 system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. You will need to report whether there is a 6¾" or 8" ring gear on the rear axle in the check out process.
- 1975 system consists of the LS exhaust (aka extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe which will be NORS. You will need to report the build date of your 1975 Mustang in the check out process.
-
This listing covers model years 1970 (302ci, 351ci, 428ci) 1971 (351ci, 429ci, 302ci) 1972 and 1973 (351ci) Mustang's including Boss, GT, and Cobra Jet stock with a 2 muffler dual exhaust. For the OE correct system for a 1970 Mustang stock with the 429ci, refer to SKU 518740. Photo depicts the stock dual exhaust for a 1970 Mustang (non GT) with the stock 351W.- Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS. Excludes the chrome tips.
-
This listing covers MY's 1965, 1966 and 1967 Mustangs stock with a 6 cyl. In 1967 the Mustang stock with the 200ci 6cyl engine was also offered stock with a resonator. If you would like that system, refer to listing 518738. Photo depicts the stock single exhaust for 1965-66 Ford Mustang with the stock 170ci or 200ci 6cyl.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
Photo depicts the system for manifolds with 45° angle- Single exhaust consists of exhaust pipe, muffler, front tailpipe and rear tailpipe.
- You will be asked to report manifold exit in the ordering process.
-
This listing covers MY's 1965 and 1966 Dodge Darts stock with the 273ci V8 and 4 BBL carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo is correct to the listing.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.
-
This listing covers model years 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Imperials and is a resonator eliminator option (as these were stock w/resonators). Photo depicts the stock dual exhaust for all 1964-66 Chrysler Imperials with the stock V8.- For MY's 1957-58 convertible dual system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS resonator eliminator pipes, and LS/RS tailpipes.
- All other MY's (and body styles in 57-58) consists of LS/RS exhaust pipe, LS/RS resonator eliminator pipes, LS/RS connector pipes, LS/RS muffler, and LS/RS tailpipes.
- MY 1959 Imperials will need to report whether it is an early or late model year.
- MY's 1959-61 will be asked to report type of suspension in the check out process.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, and 1981 Camaro's with the stock V8 single exhaust with 2 tailpipes. Photo depicts the system for MY's 1977-79 Camaro's stock with the 305ci or 350ci V8.- Complete cat-back exhaust system begins behind the catalytic converter and consists of the rear exhaust pipe, muffler, and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1967, 1968, and 1969 Camaro's with a V8 and stock single exhaust. Photo depicts the system for MY 1967.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevelle, Malibu and El Camino's with a stock 6 cyl. Photo depicts the stock single exhaust for 1968 Chevy 4dr Chevelle's, 300's, and Malibu's with the stock 6cyl (2drs take a shorter exhaust pipe).- Single exhaust system consists of exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, and 1962 Corvettes. Photo depicts the system for 1955 & 1956 Corvettes.- MY's 1955-1960 dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
- MY's 1961-62 dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS tailpipes.
- MY's 1955-56 require a 2 blt. flange with flat gaskets.
- MY's 1957-62 require a 3 blt. flange with donut gaskets.
-
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Bel Air, Impala, and Caprice's V8 stock with dual exhaust with mufflers and resonators. In these MY"s, all body styles and all engines, except the 396SHP and the 427SHP, were stock with resonators. See listing 588616 if you have the SHP 396ci or 427ci or if you would like to eliminate the resonators from your system. Photo depicts the dual exhaust for 1969 Bel Air, Biscayne, Caprice & Impala's with the stock 396ci or 427ci V8.- Dual exhaust system consists LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes with bullet style (3½" body diameter) resonators (oval style NA).
-
This listing covers model years 1959 and 1960 Bel Air, Biscayne, and Impala's with the stock V8 283ci, 348ci or 348HP and a dual exhaust with 2 mufflers and 2 resonators. Photo depicts the stock dual exhaust system for 1960 9Passenger SW's with the stock non-HO 348ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.