- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- You will be asked report with or without hot air heater in the check out process.
- 1940-48 MY's with the hot air heater will need to report the OD at the manifold.
-
This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Lincoln Continentals with the stock V12. Photo depicts the system for 1940-48 Continentals stock with the V12 and a Hot Air Heater -
This listing covers 1953 and 1954 Darrin's with the Small 6. Photo depicts the system for a 1954 Kaiser (with the SN 20141). Our system’s come with a conventional 4″ muffler.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, and muffler with tailpipe.
-
This listing covers model years 1929, 1930, 1931, 192, 1933, 1934, 1935, 1936, 1937, 1940, and 1941 Grahams. Excludes 1938-38 Standard 6 since we do not have the needed patterns for this system. For 1938-39 Supercharged 6, see listing 518778 for a Supercharged 6 system. Photo depicts the system for a 1930 Graham Paige.- Single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1927, 1928, 1930, 1931, 1932, and 1933 Franklin's with the stock 6 cyl. engine. Photo depicts the stock single exhaust for 1927-28 Franklin Series 11B & 11C with the stock 6cyl.- This single exhaust consists of the exhaust pipe, muffler and tailpipe.
- For 1924-26 & 1929 Franklin's, refer to listing 453480.
- For 1933 Olympics', models 18 or 18B, refer to listing 453478.
-
This listing covers model years 1975, 1976, 1977, and 1978 Torino, Elite, and Ranchero's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for 1975-76 Ranchero's and Station Wagon's with the stock 351ci or 400ci V8 with 1 converter on the driver side.- Single exhaust consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS. Report catalytic converter set-up in the check out process.
-
This listing covers model years 1962, 1963, 1964, 1965 and 1964 Fairlane's stock with a 6 cyl and single exhaust. Photo depicts the system for MY's 1963-65 Fairlane's with the stock 6 cyl.- 1962-65 models consist of the front exhaust pipe, rear exhaust pipe, and muffler w/tailpipe.
- 1966 models consist of the front exhaust pipe, rear exhaust pipe, and transverse muffler w/tailpipe.
-
This listing covers 1975 & 1976 Mustang's stock with a V6 171ci or a V8 302ci and were stock with catalytic converters.- The V6 171ci dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- The V8 302 dual exhaust consists of the LS front exhaust pipe (AKA extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- This set up does not eliminate the converters and they must be in place. Waldron's Exhaust cannot help with replacement converters.
-
Photos depicts the stock cat-back single exhaust for 1976 Mustang II's with the stock 302ci V8.- Single cat-back exhaust consists of the Y pipe, front muffler, over-axle pipe, rear muffler, and tailpipe.
- Y pipe may be NORS
- The LS/RS catalytic converter-pipe assembly's are not available .
-
Photo depicts the cat-back single exhaust for 1977-78 Mustang's with the stock 4cyl. and a 7¼" converter (shell length).- Single exhaust system starts behind the catalytic converter and consists of the center exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- You will be asked to report the shell length of the stock catalytic converter in the check out process.
-
This listing is for 1974 and 1975 Mustangs stock with the 4cyl 2300 & stock without a converter. Photo depicts the stock single exhaust system for 1974 Mustang with the stock 4cyl. 1975 models systems are almost identical but require a different rear exhaust pipe.- Single exhaust consists of the front exhaust pipe, rear exhaust pipe, front muffler, over-axle pipe, rear muffler and tailpipe.
-
This listing covers model years 1968, 1969, 170, 1972, and 1973 Mustang's with the stock V8 and single exhaust. For MY 1973 with a 351ci, this listing is a resonator eliminator option. Photo depicts the system for a 1969 Mustang stock with a 351ci V8 & 1970 Mustangs with the stock 351W.- Single exhaust consists of Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1977, 1978, and 1979 Thunderbird's stock with the V8 and 2 catalytic converters. Photo depicts the stock single exhaust along with the direct fit catalytic converters for 1978 Thunderbirds with the stock 351M & 5½" converters.- Single cat-back exhaust consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
- If the converters are needed, you may add them to your order for an additional $235.00 each.
-
This listing covers model years 1972, 1973, and 1974 Thunderbird's stock with a V8 and single exhaust. Photo depicts the stock single exhaust for 1972 Ford Thunderbirds stock with a 429ci or 460ci V8.- Single exhaust consists of the Y pipe, front muffler, over-axle pipe, and rear muffler with tailpipe. Y pipe may be NORS.
- 1973 model year will need to report build date; before or after 2-15-73
-
This listing covers model years 1960 and 1961 Fairlane's (for 1962 & up refer to Ford Mid Size), 1960, 1962, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Galaxie, Starliner, and Custom's with a stock 6 cyl. Photo depicts the stock single exhaust for 1968 Full Size Ford's with the stock 240ci 6 cyl, except SW's.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1957, 1958, and 1959 Ford's stock with a 6 cyl. Photos depicts the system for a 1957 Ford sedan with the stock 6 cyl. Tail pipe is built in 2 pcs. due to it exceeding a 10' pc. of tubing.- Single exhaust consists of exhaust pipe, muffler, front and rear tailpipe (1 pc. from factory/see above).
-
This listing covers model years 1957, 1958, and 1959 Ford V8 with stock single exhaust except 1959 Convertibles or Retractable Hardtops. Photo depicts the stock single exhaust system for 1959 Ford Station Wagons and Ranchero's with the stock 332ci V8 (this customer opted to have the tailpipe "cut").- Single exhaust consists of the Y pipe, muffler, front and rear tailpipe (1 pc. from factory but due to 10'L tube restrictions, this tailpipe is reproduced in 2 pcs.). Except 1957 Convertibles & Retractable Hardtops which take a Y pipe, muffler, front and rear tailpipe. Y pipe may be NORS.
-
This listing covers model years 1952,1953, 1954, 1955, and 1956 Ford's stock with a 6 cyl.
- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1928, 1929, 1930, and 1931 Model A's. Photo depicted is correct to the listing.- This is a one piece unit and consists of the exhaust pipe, tapered muffler and tailpipe. Available in aluminized steel, only.
- Exhaust pipes does not take a flange, it has a flare that uses a special nut which is not provided.
- Refer to eBay for the copper gasket that is required.
-
This listing covers model years 1909, 1910, 1911, 1912, 1913, 1914, 1915, 1916, 1917, 1918, 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, and 1927 Model T's. Photo is correct to the listing.- Consists of exhaust pipe and muffler.
- Exhaust pipe does not take a flange, it has a flare that uses a special nut which is not provided.
-
This listing is for all body styles 1959 Pacer, Ranger, Citation, and Corsair's with the stock V8 and dual exhaust. Photo depicts the exhaust system for 1959 Edsel's, except convertibles and station wagons.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes. From the factory, these tailpipes were all in 1 piece but are so long that they must be reproduced in 2 sections.
-
This listing is for all 1958 Pacer, Ranger, Citation & Corsair's with the stock V8 and single exhaust, including convertibles. Photo is correct to the listing.- Single exhaust consists of the Y pipe, muffler, front tailpipe with resonator, and rear tailpipe.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Dodge Dart, Lancer, Demon and Challenger's with a V8 and stock with a 1 muffler single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- MY's 1964-69 and 1970-74 Challenger single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1970-74 Dart single exhaust consists of Y pipe, muffler, and tailpipe.
-
This listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, and 1976 Dodge Dart, Challenger, Lancer, and Swinger's with the stock 6 cyl. Starting in 1973, Dodge offered Darts with resonators. If your system was stock with resonators and you would like to keep it stock, refer to listing 528709. Photo depicts the stock single exhaust for 1962 Dodge Lancers (exc. station wagon's) with the stock 225ci 6cyl.- For 1970-71 Challengers this single exhaust will consist of the front exhaust pipe, rear exhaust pipe & muffler with tailspout. All other systems consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers model 1960, 1961, and 1962 Dart, Phoenix, Pioneer, and Seneca stock with a dual exhaust. 1960 MY covers 361ci and 383ci engines, only. No dual's available for 1960 with a 318ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1965, 1966, 1967, and 1968 Coronet, Charger, Polara, Custom 880, Super Bee, and Monaco's that were stock with a 1 muffler single exhaust.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Dodge's with the stock 6 cyl and single exhaust. Photo depicts the stock single exhaust for 1970 Coronet's & Charger's (except station wagons) with the stock 6cyl. The exhaust pipe and muffler (in photo) are NORS parts.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Dodge's with a stock V8 and single exhaust. Excludes 1953-56 Dodge convertibles which were stock with muffler & resonator. We do not have all of the needed patterns. Photo depicts the system for 1954 Dodge's with the stock V8 (exc. convertible and HT).- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1916, 1917, 1918, 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, and 1932, Dodge's with a 4cyl (1928 last MY used) or 6 cyl engine. Photo depicts system for a 1936 Dodge Coupe convertible and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1957, 1958, 1959, 1960, and 1961 Desoto convertibles which were stock with mufflers and resonators. Photo depicts the stock dual exhaust for 1957 Desoto Firedome, Fireflite, and Adventures convertibles with the stock V8.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS front mufflers, LS/RS rear mufflers, and LS/RS tailpipes.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, and 1954 Desoto's stock with a 6 cyl and single exhaust. Photo depicts the system for a 1949 Custom / Deluxe (exc. convertibles or 8 passenger).- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1954 Custom Imperial's, 1955, and 1956 Imperial's & Crown Imperial's stock with a V8 and dual exhaust. Photo depicts the stock dual exhaust for 1956 Chrysler Imperial's (the Crown Imperial requires different tailpipes).- For 1954 Models; this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1955-56 Imperials; this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1955-56 Crown Imperials with longer body's; this dual exhaust system consists of LS/RS exhaust front exhaust pipes. LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipe section & LS/RS rear tailpipe section (tailpipe was originally 1 long pc. but cannot be built full length in the aftermarket world).
- In the check out process, you will be asked to report your model. Crown Imperial aluminized steel systems will receive an additional cost of $186.00 while the T409 stainless steel systems will receive an additional cost of $374.00.
-
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
Out of stock
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
This listing covers model years 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, and 1939 Royal, Airflow, and Airstream's with the straight 8. Photo depicts the system for a 1936 Chrysler Airflow (only) C10.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe. Please specify model name through the check out process.
-
This listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988, and 1989 Camaro's with stock V8 single exhaust with 2 tailpipes. This listing includes 1985 Z28. Photo depicts the cat-back single exhaust with 2 tailpipes for 1984 Camaro's (except Z28) with the stock 305H 5.L V8.- Single cat-back exhaust system begins behind the catalytic converter and consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Camaro's V8 (all except MY 1969 stock w/302ci, 396HP, & 396SHP) dual exhaust with the transverse muffler (only). Photo depicts the system for a 1969 Camaro stock with a 396ci. (exhaust pipe are different for other engines in 1969).- Dual exhaust system includes LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes. System does not include chrome tips.