- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.
-
This listing covers MY's 1964-65 Lincoln Continentals with the stock V8.
-
This listing covers model years 1966, 1967, 1968, and 1969 Continentals with the stock V8.
- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.
-
Listing covers model years 1969, 1970, and 1971 Mark III with the stock V8 and dual exhaust. Photo depicts exhaust system for 1969-71 Lincoln Mark III.
- Dual exhaust system consists of the H pipe, LS/RS mufflers, LS/RS connector pipe, and LS/RS resonator w/tailspout.
- This stock system starts out at 2¼"OD and reduces down to 1¾"OD at the muffler outlets.
-
For model years 1970, 1971, 1972, 1973, and 1974 Lincoln's with the stock V8 and single exhaust. The Mark IV begins in 1972. Excludes the Mark III which were stock with a dual exhaust. Photos depicts the system for 1972-73 Mark IV's with the stock V8.
- This single exhaust consists of the Y pipe, front muffler, connector pipe, and rear muffler with tailpipe.
- The Lincoln Continentals require a different system from the Lincoln Mark IV so please, be sure to report your model correctly.
- For MY 1973, please specify the build date during the check out process (before or after 2-15-73).
-
This listing covers model years 1975, 1976, 1977, and 1978 Mark IV and Mark V's. Photo depicts the dual cat-back system for a 1978 Mark V stock with converters on both manifolds. This photo was taken long ago and shows the resonator inlet pipe as a separate pc. We now have patterns for the LS/RS resonators and that pipe is now an integral part of the resonators.
- Dual cat-back exhaust system consists of the H pipe (2 pc.), LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe. Please be certain to specify if your Mark is stock with 1 or 2 cats during the check our process.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Mark IV, Mark V and Continentals stock with a V8 and single exhaust. Photo depicts the cat-back single exhaust for 1977-79 Continentals stock with the 400ci.
- Single cat-back system starts behind the cat(s) and consists of the Y pipe, muffler, over-axle pipe, and resonator with tailpipe.
- MY 1975 Lincoln Mark IV's; you will need to report whether your Mark IV system is a direct fit to the manifolds & has no converters or whether it's stock with a converter on the DS.
- MY 1975 Lincoln Continental's; you will need to report whether your Continental is stock with 1 or 2 converter's.
- MY's 1976-79 all Lincoln's with the single exhaust require 2 converters. Y pipe may be NORS.
-
This listing covers model years 1980, 1981, and 1982 Continental, Continental Town Car, and Mark VI with the stock V8 302ci and single exhaust with muffler and resonator.
- Single cat-back system starts after the LS/RS converters and consists of the Y pipe, muffler, and tailpipe with resonator. Y pipe may be NORS.
-
For MY 1982 Continental (except Town Car & Mark VI) the stock system starts with a Y pipe with 2 cats and a 3rd catalytic converter. This listing starts behind the 3rd converter. For MY's 1983, 1984, and 1985 Continental and Mark VII the stock system starts with LS/RS exhaust pipes and Y pipe with converter built in. This listing starts behind the Y pipe. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This cat-back system consists of the rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988 and 1989 Mark VI and Town Car's with the stock V8 302ci and dual exhaust with mufflers and resonators. Photo depicts the stock dual cat-back system for 1982-88 Lincoln Town Car's & Mark VI's 2drs. with the stock 302ci. All parts in photo are NORS.
- This dual exhaust system starts behind the catalytic LS/RS converters and consists of the H pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator w/tail spout.
- All or some parts may be NORS.
- System is 2" OD throughout.
- H pipe is NA for 4 dr. systems. Contact us if you have an OE H pipe on your 4dr. system and let's see what we can do for you.
-
This listing covers model years 1989, 1990, 1991, 1992, and 1993 Town Car's with the stock engine and dual exhaust with 2 mufflers.
- MY 1989 has LS/RS catalytic converters, MY's 1990-93 have LS/RS converters that are connected. This dual exhaust system starts behind the cats and consist of the H pipe, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing covers model years 1949, 1950, 1951, 1952, and 1953 Olds 88 & 98's stock with the V8. Photos depicts the system for MY's 1949-50 Olds 88's with the stock V8.
- Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe. This system requires 3 gaskets. Waldron's can help you out with a flat gasket but we do not have the Oldsmobile style gasket available.
- MY's 1952 & 1953 will need to report whether the vehicle was stock with or without power steering in the check out process.
-
This listing covers model years 1954, 1955, and 1956 Olds 88 and 98 with the stock V8. Photo depicts the system for MY 1956 Olds Super 88.
- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe.
- Regarding 1954 & 1955 models; if ordering the system in T409 SS, the cross-over pipe will be built in 2 pcs. If ordering an aluminized steel system, the cross-over pipe will be NORS.
-
This listing covers model years 1957, 1958, 1959, and 1960 Olds 88 and 98's with the stock V8 and single exhaust w/1 mufflers. Excludes station wagons, refer to listing 428534. Photo depicts the stock single exhaust for 1959-60 Oldsmobile 88's with the stock V8
- Single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, front tailpipe, and rear tailpipe.
-
This listing covers model years 1957,1958, 1959, and 1960 Olds 88 and 98, all body styles including SW, stock with a V8 and dual exhaust. 1958 models need to report type of suspension in the check out process. Photo depicts the system for a 1957 Olds 98.
- MY 1957 consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, LS front & rear tail pipes, and RS tailpipe.
- MY 1958 W/O Air Suspension consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, LS front & rear tail pipes, and RS tailpipe.
- MY 1958 W/Air Suspension consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, and LS/RS tailpipes.
- MY's 1959-60 consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, and LS/RS tailpipes.
-
This listing covers model years 1961, 1962, and 1963 F85 and Cutlass's with the stock 215ci and single exhaust. Photo depicts the stock single exhaust for 1963 F85 with the stock 215ci V8.
- This system is a metal-to-metal connection at the manifold and no gaskets are required there. However, some of these Y pipes do require a gasket at the outlet end and unfortunately Waldron's does not have these gaskets available.
- Single exhaust system consists of the Y pipe (flange connection to), rear exhaust pipe, single in/single out same end transverse muffler, and tailpipe. Y pipe may be NORS.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron’s Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
- 1st Design: The propeller shaft center bearing support is mounted to the floor pan.
- 2nd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe will have a flat area 34" from the outlet end.
- 3rd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe is round through out (no flattened area).
-
- This turbo single exhaust is unique and consists of the front exhaust pipe (AKA crossover pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, resonator, over-axle pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
- Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
-
This listing covers model years 1964, 1965, 1966, and 1967 Olds Cutlass & F85 stock with a V8 and single exhaust with muffler and resonator. Photo depicts the stock single exhaust for 1965-67 Olds F85's (except Vista Cruiser) with the stock 330ci V8 & 4bbl carburetor
- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear single in/single out transverse muffler, and tailpipe.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds F85 and Cutlass' with the stock V8 stock dual exhaust or for MY's 1965-74 you may convert your single exhaust to a dual exhaust. We will supply you with the needed blocker plate. For MY 1964 this dual exhaust is for 1964 F85's /4-4-2 STOCK with a dual exhaust. We do NOT offer a single-to-dual conversion. If your 1964 Cutlass/F85 was stock with a single than we can help you out with a single exhaust (only). Photo depicts the system for a 1971 Cutlass 4-4-2 with the stock 455ci engine.
- This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- You will be asked to report the stock set-up in the the check out process.
-
This listing covers model years 1968, 1969, 1970, 1971, and 1972 Olds F85 (including station wagon), and Vista Cruiser's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for 1972 Olds Cutlass' (except for 4dr. & SW) with the stock 350ci V8.
- This single exhaust system consists of the crossover pipe (Vista Cruiser's in 1968-69 w/400ci & 1971 w/455ci this is a NORS Y pipe), exhaust pipe, front muffler, connector pipe, transverse resonator with tailpipe.
- The 350ci V8 is a metal-to-metal connection at the manifold and does not require gaskets.
-
This listing covers model years 1968, 1969, 1970, 1971, 1972, 1973, and 1974 F-85's and Cutlass' with the stock V8 and single exhaust w/1 muffler. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1967, 1968, 1969, 1970, and 1971 F-85 and Cutlass' with a stock 6 cyl 250ci and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- For MY 1967 this single exhaust consists of the exhaust pipe, muffler, front tailpipe, and rear tailpipe.
- For MY's 1968-71 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing is for 1975, 1976, and 1977 Cutlass' with the stock 6 cyl or V8 and begins behind the catalytic converter. Photo depicts all but the catalytic converter for a 1976 Olds Cutlass 2 dr. with the stock 350ci w/4bbl carb.
- Single cat-back exhaust consists of the rear exhaust pipe, muffler, and tailpipe.
- If the converter and/or pipes forward of the converter are needed, please contact us for pricing and availability.
-
This listing covers model years 1961, 1962, 1963, and 1964 Olds 98, 88, Jetstar, Dynamic, and Super's with the stock V8 and a 2 muffler single exhaust system.
- Single exhaust consists of the crossover pipe, exhaust pipe, rear exhaust pipe, front muffler, connector pipe, and rear muffler with tailpipe.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Olds 98, 88, Starfire, Super, Dynamic, and Jetstar's, including station wagon's, with their perspective stock V8 and dual exhaust. Photo depicts the system for MY's 1959-60 Model 98.
- For MY's 1961-62 this dual exhaust system consists of the LS/RS front exhaust pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe.
- For MY's 1963-64 this dual exhaust system consists of the LS exhaust pipe, RS front and rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers with tailpipe.
- For 1965 Starfire this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator. It does not include the chrome tips.
- For MY's 1965 (other than the Starfire)-74 this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator w/tail spouts.
- 1969-70 Olds 98's were stock with a single exhaust (only). You may convert to a dual exhaust system if the driver side manifold points to the rear with a 45° angle (like 1967-68 models).
-
This listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds 88, 98, Delmont, Jetstar, and Delta's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for a 1971 Olds Custom Cruiser SW with the stock V8 (455ci).
- Single exhaust system consists of crossover pipe, exhaust pipe, front muffler, over-axle pipe, and rear muffler with tailpipe.