- Single cat-back consists of the Y pipe, muffler and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, and 1982 LTD's with the stock V8. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. -
This listing covers model years 1980, 1982, 1983, 1984, 1985, 1986, 1987, and 1988 LTD and Crown Vic's stock with the V8 and dual exhaust. Photo depicts the cat-back dual exhaust system for 1983-88 Ford Full Size Station Wagons with the stock 302ci V8.- Dual cat-back exhaust consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing covers model years 1927, 1928, 1930, 1931, 1932, and 1933 Franklin's with the stock 6 cyl. engine. Photo depicts the stock single exhaust for 1927-28 Franklin Series 11B & 11C with the stock 6cyl.- This single exhaust consists of the exhaust pipe, muffler and tailpipe.
- For 1924-26 & 1929 Franklin's, refer to listing 453480.
- For 1933 Olympics', models 18 or 18B, refer to listing 453478.
-
This listing covers model years 1929, 1930, 1931, 192, 1933, 1934, 1935, 1936, 1937, 1940, and 1941 Grahams. Excludes 1938-38 Standard 6 since we do not have the needed patterns for this system. For 1938-39 Supercharged 6, see listing 518778 for a Supercharged 6 system. Photo depicts the system for a 1930 Graham Paige.- Single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers 1938 & 39 Graham's stock with the Supercharged 6 cyl. Photos depicted is correct to the listing.- This unique single exhaust system consists of LS/RS exhaust pipes, dual in/single out muffler, and tailpipe. Waldron's includes a universal flanges however it is best to reuse the original cast iron flanges when possible.
-
Listing covers model years 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, and 1951 Hudson's. Photo depicts the stock single exhaust for 1950 Hudson Pacemaker & 500's with the stock 6 cyl. engine.- For MY's 1924-47 the single exhaust system consists the exhaust pipe, muffler and tailpipe.
- For MY's 1948-51 the system consists of the front exhaust pipe, rear exhaust pipe, muffler with tailpipe.
-
This listing covers model years 1952 Commodore 8 cyl, 1952, 1953, 1954, and 1956 Pacemaker, Jet, Wasp, and Hornet's with the 6 cyl.- Single exhaust consists of front exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1952, 1953, 1954, 1955, and 1956 Hudson's stock with a V8 and single exhaust with muffler and resonator.- Single exhaust consists of the crossover pipe, Y pipe, connector pipe, and rear muffler with tailpipe.
-
- This dual exhaust system consists of the crossover pipe, LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1952, 1953, 1954, and 1955 Hudson 6B Commodore, Jet, 7B, 7C, 7D Hornet, 4C, 4D Wasp, 5B Wasp, 5D, 5D Super Wasp, 1C, 2C, 2D, 3D, (1955) Wasp and Hornet's stock with the 6 cyl single exhaust with muffler and resonator. Photo depicts the system (except rear exhaust pipe varies between models) for 1952-54 Hudson's.- For MY's 1952-54, this single exhaust system consists of the exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
- For a 1955 Hornet, this single exhaust consists of the exhaust pipe, front muffler, over-axle pipe, and resonator with tailpipe.
- For 1955 Wasp, this single exhaust consists of the exhaust pipe, front muffler, rear muffler with long inlet pipe, and tailpipe.
-
This listing covers model years 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935 w/6 cyl, 1936, 1937, 1939, 1940, and 1941 Hupmobile's. Excludes 1935 w/8 cyl & 1936 w/6 cyl. Photos depicts system for 1933-34 Hupmobile's.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, and 1954 Kaiser's. Photo depicts the system for 1951 Kaiser's with the stock 6 cyl.- Most models consist of the exhaust pipe, muffler and tailpipe.
-
This listing covers 1953 and 1954 Darrin's with the Small 6. Photo depicts the system for a 1954 Kaiser (with the SN 20141). Our system’s come with a conventional 4″ muffler.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, and muffler with tailpipe.
-
- Single exhaust system consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1925, 1926, 1927, 1928, 1929, 1930, 1931, and 1932 Lincoln's with the stock 8 cyl. This listing includes 1932 Lincoln's with the stock V8. Photo depicts the system for a 1925 Lincoln Model L with the stock 8 cyl.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
The 1935 Hupmobile with an 8 cyl and the 1938 Hupmobile with the 6 cyl engine were stock with an exhaust pipe, muffler, connector pipe, resonator, and tailpipe.
-
This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Zephyr's. Photo depicts the exhaust system for 1938-48 Lincoln Zephyr with hot water heater.- For MY's 1936-37 this single exhaust consists of the cross-over pipe & Y pipe (2pc. Y pipe), center exhaust pipe, rear exhaust pipe, and muffler with short tailpipe.
- For MY's 1938-48 this single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, and muffler with short tailpipe.
-
This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Lincoln Continentals with the stock V12. Photo depicts the system for 1940-48 Continentals stock with the V12 and a Hot Air Heater- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- You will be asked report with or without hot air heater in the check out process.
- 1940-48 MY's with the hot air heater will need to report the OD at the manifold.
-
This listing covers model years 1949, 1950, and 1951 Lincoln's stock with a V8 and single exhaust with 1 muffler. Excludes 1949 EL convertible as we have no patterns.3 Photo depicts a 1949 Lincoln Cosmopolitan.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe.
-
- This single exhaust consists of the crossover pipe (w/4blt flanges & 2"OD), exhaust pipe (w/4blt flange & 2¼"OD), front muffler, rear muffler and tailpipe (2"OD).
-
This listing covers MY's 1953 and 1954 Lincolns with the stock V8. Photo depicts the system for 1954 Lincolns with the stock V8- This single exhaust system consists of the crossover pipe, exhaust pipe, front muffler, center muffler, connector pipe, rear muffler and tailpipe.
-
This listing covers model years 1955, 1956, and 1957 Capri and Premiere's stock with a V8 and dual exhaust. Photos depicts the stock dual exhaust for 1957 Lincoln Capri's and Premiers with the stock V8- For MY 1955 the stock dual exhaust consists of the LS front and rear exhaust pipe, RS exhaust pipe, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, & LS/RS tailpipes.
- For MY's 1956-57 the system consists of LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS mufflers & LS/RS tailpipes. 1956 tailpipes are built to go into the bumper. 1957 tailpipes built with turndowns.
-
This listing covers MY's 1958, 1959, and 1960 Lincoln Continental Premiere's & Capri's with the stock V8. Photo depicts the dual exhaust for all models in 1958 with the stock V8 430ci.- Dual exhaust system consists of the cross-over pipe, LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailspouts.
-
This listing covers MY's 1961, 1962, and 1963 Continentals with the stock V8.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.