- Single exhaust system consists of cross-over pipe, Y pipe (AKA 2 pc. Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1954, 1955, and 1956 Dodge ½T's with the stock V8. Photo is correct to the listing. -
This listing covers model years 1954, 1955, and 1956 New Yorker, 300 and Windsor's stock with a V8 and dual exhaust. Photo depicts the stock dual exhaust for 1954 New Yorker's.- For 1954-55 model years the dual exhaust system consists of LS/RS front exhaust pipe, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
- Model year 1956 consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1954 Custom Imperial's, 1955, and 1956 Imperial's & Crown Imperial's stock with a V8 and dual exhaust. Photo depicts the stock dual exhaust for 1956 Chrysler Imperial's (the Crown Imperial requires different tailpipes).- For 1954 Models; this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1955-56 Imperials; this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1955-56 Crown Imperials with longer body's; this dual exhaust system consists of LS/RS exhaust front exhaust pipes. LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipe section & LS/RS rear tailpipe section (tailpipe was originally 1 long pc. but cannot be built full length in the aftermarket world).
- In the check out process, you will be asked to report your model. Crown Imperial aluminized steel systems will receive an additional cost of $232.50 while the T409 stainless steel systems will receive an additional cost of $467.50.
-
This listing is for the OE correct system for all 1954 Packard's with the stock resonator.- System consists of the exhaust pipe, muffler, and tailpipe with resonator built into it.
-
This listing covers model years 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Cambridge, Plaza, Cranbrook, Savoy, Belvedere, and Fury's with the stock 6 cyl engine. Photo depicts a 1956-57 Plymouth (all models) 6 cyl system.- For MY's 1953-56 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- For MY's 1957-59 this single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Dodge's with a stock V8 and single exhaust. Excludes 1953-56 Dodge convertibles which were stock with muffler & resonator. We do not have all of the needed patterns. Photo depicts the system for 1954 Dodge's with the stock V8 (exc. convertible and HT).- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing cover MY's 1953, 1954, 1955, & 1956 Ambassadors with the dual jet carburetor and 1954 & 1955 Statesman stock with muffler and resonator. Images are copies for the system schematics.- For MY's 1953-56 Ambassador's stock with the dual jet carb, the single exhaust system consists of the exhaust pipe, muffler, connector pipe, and resonator w/tailspout
- For MY's 1954-55 Statesmen the single exhaust system consist of the exhaust pipe, muffler, front tailpipe with resonator built in, and rear tailpipe.
-
This listing covers model years 1953, 1954 and 1955 Buick's. Excludes 1953 Buick Special which has a straight 8. Photo depicts the system for MY's 1954-55 Buick Roadmaster and Super's.- System consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1953 and 1954 Lincolns with the stock V8. Photo depicts the system for 1954 Lincolns with the stock V8- This single exhaust system consists of the crossover pipe, exhaust pipe, front resonator, center muffler, connector pipe, rear resonator and tailpipe.
- Give Olson's Gaskets a call for the needed gaskets; 360-871-1207.
-
This listing covers 1953 and 1954 Darrin's with the Small 6. Photo depicts the system for a 1954 Kaiser (with the SN 20141). Our system’s come with a conventional 4″ muffler.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, and muffler with tailpipe.
-
This listing covers MY's 1953 and 1954 Corvette's with the stock 6cyl. Photo depicts the stock dual exhaust system for 1953-54 Corvette's with the stock 6cyl.- Both exhaust pipes start off on the driver side with the RS pipe crossing over (with a 90° bend) behind the engine to the passenger side, where it turns 90° again to connect to the muffler, both LS/RS mufflers come with long inlet and outlet pipes, then we have the LS/RS tailpipes. We provide a 2 bolt flange but it is best to reuse the original cast iron flange (if possible).
-
This listing covers the model year 1953 Buick Specials with the straight 8. Photo depicted is correct to the listing.- Single exhaust system includes exhaust pipe, muffler and tailpipe. Due to muffler length, this muffler is built in 2 pcs. and will have a bead weld around the center of the muffler.
-
Listing covers MY's 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959 Desoto's stock with a V8 and single exhaust. Excludes 1953-54 Desoto convertibles which were stock with 2 mufflers. Photo depicts the stock single exhaust for 1954 Desoto Firedome's with the stock V8 except convertibles, SW's & 8 passenger cars.- For 1952-56 models & 1957 Firesweep this single exhaust system consists of a cross-over pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
- For 1957 Firedome & Fireflite & all 1958-59 models this single exhaust system consists of Y pipe, rear exhaust pipe, muffler and tailpipe.
- Y pipe may be NORS.
-
This listing covers MY's 1952 (still referred to as F1, F2, & F3), 1953, 1954, 1955, and 1956 Ford F100, F250 & F350's stock with a 6 cyl. Photo depicts the system for 1954-55 F100, F250 or F350 with a stock 6 cyl.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1952,1953, 1954, 1955, and 1956 Ford's stock with a 6 cyl. Photo depicts the stock single exhaust for 1955-56 Ford Station Wagon's and Sedan Deliveries with the stock 6cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1952, 1953, 1954, 1955, and 1956 Cadillac's (all series and all body styles) with stock dual exhaust with 4 mufflers. Photo depicts the system for 1952-53 Cadillac coupes and convertibles.- Dual exhaust system includes - LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, LS/RS tailpipes. Tailpipes will fit into the factory tips located in the bumper. These tips are not part of the package.
- For Series 75 and Commercial Chassis, this will not be a direct fit. We do not have all the patterns needed (in these model years) for Commercial Chassis or Series 75. If you have a 1952-56 Series 75 or Commercial Chassis we will supply you with a couple pieces of straight tubing. You will then need to modify the system to fit.
- If you have original pipes still on your 1952-56 Cadillac Series 75 or Commercial Chassis, please give us a call at 800-503-9428.
-
This listing covers model years 1952, 1953, 1954, and 1955 Hudson 6B Commodore, Jet, 7B, 7C, 7D Hornet, 4C, 4D Wasp, 5B Wasp, 5D, 5D Super Wasp, 1C, 2C, 2D, 3D, (1955) Wasp and Hornet's stock with the 6 cyl single exhaust with muffler and resonator. Photo depicts the system (except rear exhaust pipe varies between models) for 1952-54 Hudson's.- For MY's 1952-54, this single exhaust system consists of the exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
- For a 1955 Hornet, this single exhaust consists of the exhaust pipe, front muffler, over-axle pipe, and resonator with tailpipe.
- For 1955 Wasp, this single exhaust consists of the exhaust pipe, front muffler, rear muffler with long inlet pipe, and tailpipe.
-
This listing covers model years 1952 Commodore 8 cyl, 1952, 1953, 1954, and 1956 Pacemaker, Jet, Wasp, and Hornet's with the 6 cyl.
- Single exhaust consists of front exhaust pipe, muffler, and tailpipe.
-
- This single exhaust consists of the crossover pipe (w/4blt flanges & 2"OD), exhaust pipe (w/4blt flange & 2¼"OD), front muffler, rear muffler and tailpipe (2"OD).
-
This listing covers model years 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Commander, President, Golden Hawk, Hawk, and Lark's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for 1964 Commander Lark Station Wagon w/spin-on oil filter, w/o a sliding roof and the stock 289ci V8. Single exhaust consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and from here it varies, some models have a tailpipe while others have a front and a rear tailpipe.- 1958 Sedans will need to report whether it is a “long wheel base sedan” or “except long wheel base sedan”.
- 1963 & 1964 Larks will need to report which type of filter is stock; spin-on filter or cartridge filter.
- 1964-66 Lark Station Wagons will need to report whether your SW has a sliding roof or not.
-
This listing covers model years 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 New Yorker, Saratoga, Windsor, Crown Imperial, and Imperial's with the stock V8 and single exhaust. Photo depicts the stock single exhaust system for a 1955 Windsor with the stock V8- For MY's 1951-54 this single exhaust consists of Y pipe, crossover pipe, rear exhaust pipe, muffler and tailpipe.
- For MY's 1955-58 the system consists of Y pipe, crossover pipe, muffler and tailpipe. 1959 consists of Y pipe, rear exhaust pipe, muffler and tailpipe.
- Some application may have an NORS Y pipe.
-
This listing covers model years 1951, 1952, 1953, and 1954 Chrysler Windsor with the stock 6 cyl. Photo depicts the 6 cyl single exhaust for 1953-54 Chrysler Windsor's- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1956, 1957, 1958, 1957, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, and 1969 International ½T, ¾T, and 1T's L110, L111, L112, L120, L121, L122, L130, R100, R102, R110, R111, R120, R121, R122, S100, S110, S112, S130, A110, A120, A130, B100, B110, B120, B130, C110, C120, C130, 1100A, 1200A, 1300A, C1000, D1000, C1100, D1100, C1200, D1200, C1300, D1300's stock with 2WD (excludes 4WD). Photo depicts the exhaust system for 1956 International ½T-2T with the stock BD220ci 6 cyl engine and with the spare tire carrier mounted on the left side, front of the bed on the outside.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- For MY's 1950-61: Exhaust pipe will not come with a flange (replacement is NA). You will need to keep the original cast-iron flange and reuse it.
- For MY's 1962-69: Exhaust pipe will come with a flange however if you have an original cast iron flange, keep and reuse it
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 GMC 1½T's with the stock 6 cyl. Photo depicts the single exhaust system for 1955-58 GMC truck models 100-24, 150-24, 250-24 & PM250-24 with the stock 6 cyl- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Flange is not included with this exhaust pipe. Reuse original cast iron flange (if possible).
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Dodge's stock with a 6 cyl. Photo depicts the system for MY's 1953-54 all models and body styles.- Single exhaust consists of the exhaust pipe, muffler and tailpipe.
-
This listing cover model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Chevy trucks with the stock 6 cyl. Photo depicts the system for MY's 1950-55 (MY 1955 1st Series) Chevy 3100 with the stock 6 cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- Please specify the vehicle series through the checkout process.
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ramblers with the L head 6 cyl. Photo depicts the system for MY's 1950-54 Ramblers (except 1954 w/Hydramatic trans.).- This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's does not carry the needed clamps.
-
If you have an Inline 6 cylinder engine in your 1950, 1951, 1952, 1953, 1954, or 1955 Chevy ½T, ¾T or 1T and have always wanted a dual exhaust system then this listing is for you! This system is a direct fit to your cast iron Fenton Chevy 6 cyl headers. This system does not include the cast iron Fenton headers.- This dual conversion kit consists of inboard & outboard exhaust pipes, dual in/dual out muffler and inboard/outboard tailpipes.
- During the check out process, let us know how you would like your tailpipes to exit; out the driver side along the quarter panel or straight out the back.
-
This listing covers model years 1950, 1951, 1952, 1953, and 1954 Nash with the L Head 6 cyl. Excludes the 1950-54 Nash-Healey which is NA. Photos depicts the single exhaust system for 1950-51 Nash Statesman's with the stock L-Head 6cyl.- This single exhaust consists of exhaust pipe, muffler, and tailpipe. Exhaust pipe may be NORS.
- The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's does not carry the needed clamps.
-
This listing covers model years 1949,1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevrolet Bel Air, Impala, Biscayne, Delray and Nomads with 6 cyl. Photos depicts the system for MY's 1953-54 Chevy's with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- For MY's 1965-68; you will need to report the desired tailpipe exit in the check out process.
-
This listing covers model years 1949, 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ford Mainline, Customline, and Crestline's stock with the flathead V8. Photo depicts the system for MY's 1952-53 Ford's (except convertibles, SW's & sedan delivery's) with the tailpipe built in 2 sections for shipping purposes.- Single exhaust consists of the crossover pipe (MY's 1949-53 pipes crosses under the engine / MY's 1954-56 pipe crosses over the engine), exhaust pipe, muffler, and tailpipe.
-
This listing helps you convert your 1949, 1950, 1951, 1952, 1953, 1954, and 1955 Oldsmobile with stock single exhaust to a dual exhaust system. Excludes models with Power Brakes. Our patterns do not accommodate vehicles with power brakes. If your 1949-55 Olds has power brakes, this system will not fit. Photo depicts the dual conversion system (with mufflers) for 1953-55 Olds with the stock V8. Photo shows a system that the tail pipes have been cut to reduce the shipping cost (and can also make installation easier).- The dual conversion exhaust kit consists of LS front & rear exhaust pipes, RS exhaust pipe, LS/RS glasspacks, LS/RS tailpipes, gaskets and clamps. We will provide a blocker plate for MY's 1954-55. This kit does not come with the hangers.
-
This listing covers MY's 1949, 1950, 1951, 1953, and 1954 Mercury's with the stock flathead V8. Photo depicts the system for MY's 1949-51 Mercury's with the stock engine.- This single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, and tailpipe.
-
This listing covers 1949, 1950, 1951, 1952. 1953 & 1954 Henry J's with the stock 4 cyl or 6 cyl engine. Photo depicts the stock single exhaust for 1951-54 Henry J's with the stock 6cyl.- This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1949, 1950, 1951, 1952, and 1953 Olds 88 & 98's stock with the V8. Photos depicts the system for MY's 1949-50 Olds 88's with the stock V8.- Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe. This system requires 3 gaskets. Waldron's can help you out with a flat gasket but we do not have the Oldsmobile style gasket available.
- MY's 1952 & 1953 will need to report whether the vehicle was stock with or without power steering in the check out process.
-
This listing covers model years 1949, 1950, 1951, and 1952 Buick's 8 cyl. Photo depicts the stock exhaust for 1949 Series 70 Roadmaster's.- MY 1949 this single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1950-52 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.