Shop

  • This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ramblers with the L head 6 cyl. Photo depicts the system for MY's 1950-54 Ramblers (except 1954 w/Hydramatic trans.).
    • This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
    • The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's does not carry the needed clamps.
     
  • If you have an Inline 6 cylinder engine in your 1950, 1951, 1952, 1953, 1954, or 1955 Chevy ½T, ¾T or 1T and have always wanted a dual exhaust system then this listing is for you! This system is a direct fit to your cast iron Fenton Chevy 6 cyl headers. This system does not include the cast iron Fenton headers. 
    • This dual conversion kit consists of inboard & outboard exhaust pipes, dual in/dual out muffler and inboard/outboard tailpipes.
    • During the check out process, let us know how you would like your tailpipes to exit; out the sides along the quarter panel or straight out the back.
  • This listing covers model years 1950, 1951, 1952, 1953, and 1954 Nash with the L Head 6 cyl. Excludes the 1950-54 Nash-Healey which is NA.  Photos depicts the single exhaust system for 1950-51 Nash Statesman's with the stock L-Head 6cyl.
    • This single exhaust consists of exhaust pipe, muffler, and tailpipe. Exhaust pipe may be NORS.
    • The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's does not carry the needed clamps.
       
  • This listing covers model years 1949,1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevrolet Bel Air, Impala, Biscayne, Delray and Nomads with 6 cyl. Photos depicts the system for MY's 1953-54 Chevy's with the stock 6 cyl.
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
    • For MY's 1965-68; you will need to report the desired tailpipe exit in the check out process. 
  • This listing covers model years 1949, 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ford Mainline, Customline, and Crestline's stock with the flathead V8. Photo depicts the system for MY's 1952-53 Ford's (except convertibles, SW's & sedan delivery's) with the tailpipe built in 2 sections for shipping purposes. 
    • Single exhaust consists of the crossover pipe (MY's 1949-53 pipes crosses under the engine / MY's 1954-56 pipe crosses over the engine), exhaust pipe, muffler, and tailpipe.
  • This listing helps you convert your 1949, 1950, 1951, 1952, 1953, 1954, and 1955 Oldsmobile with stock single exhaust to a dual exhaust system. Excludes models with Power Brakes. Our patterns do not accommodate vehicles with power brakes. If your 1949-55 Olds has power brakes, this system will not fit.   Photo depicts the dual conversion system (with mufflers) for 1953-55 Olds with the stock V8. Photo shows a system that the tail pipes have been cut to reduce the shipping cost (and can also make installation easier). 
    • The dual conversion exhaust kit consists of LS front & rear exhaust pipes, RS exhaust pipe, LS/RS glasspacks, LS/RS tailpipes, gaskets and clamps. We will provide a blocker plate for MY's 1954-55. This kit does not come with the hangers.
    Lead time on this system with glasspacks generally runs 5-6 wks. If you opt to have the system built with mufflers, the lead time will be as posted above. 
  • This listing covers MY's 1949, 1950, 1951, 1953, and 1954 Mercury's with the stock flathead V8. Photo depicts the system for MY's 1949-51 Mercury's with the stock engine.
    • This single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, and tailpipe.
  • This listing covers 1949, 1950, 1951, 1952. 1953 & 1954 Henry J's with the stock 4 cyl or 6 cyl engine. Photo depicts the stock single exhaust for 1951-54 Henry J's with the stock 6cyl. 
    • This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
  • This listing covers model years 1949, 1950, 1951, 1952, and 1953 Olds 88 & 98's stock with the V8. Photos depicts the system for MY's 1949-50 Olds 88's with the stock V8.
    • Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe. This system requires 3 gaskets. Waldron's can help you out with a flat gasket but we do not have the Oldsmobile style gasket available. 
    • MY's 1952 & 1953 will need to report whether the vehicle was stock with or without power steering in the check out process.
  • This listing covers model years 1949, 1950, 1951, and 1952 Buick's 8 cyl. Photo depicts the stock exhaust for 1949 Series 70 Roadmaster's. 
    • MY 1949 this single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
    • MY's 1950-52 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1949, 1950, and 1951 Lincoln's stock with a V8 and single exhaust with 1 muffler. Excludes 1949 EL convertible as we have no patterns.3 Photo depicts a 1949 Lincoln Cosmopolitan.
    • Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe.
  • Photo depicts the system for 1949 and 1950 Chrysler Town & Country convertible with the stock 8cyl. 
    • This single exhaust system consists of the exhaust pipe, muffler, connector pipe, resonator, and tailpipe.
     
  • This listing covers model years 1949, 1950,  and 1951 Cadillac's with the stock V8. Photo depicts the system for 1949 Cadillac's. 
    • Single exhaust system consists of the cross-over pipe (manifold to manifold), exhaust pipe, muffler and tailpipe.
  • This listing covers model years 1948, 1949, 1950, 1951, and 1952 Ford ½T, ¾T & 1T trucks with the stock flathead V8. Convert your flathead Ford to dual's with Waldron's exclusive Dual Conversion kits! Complete kits bolt on to the original manifolds. Photo depicts the dual conversion for 1948-52 Ford F1 with the stock V8
    • Dual conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS  glasspacks, LS/RS tailpipes, gaskets, and clamps.
    • Period specific hangers are N/A. Universal hangers only. Hangers are not included in the kit but may be added to your cart.
    •  Exhaust pipes start out at 1&5/8" OD and increase to 2"OD immediately after the flange. Tail pipes are 1¾"OD.
    • If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. 
    Lead time on this system with glasspacks generally runs 5-6 wks., with mufflers the lead time will be as posted above.  
  • This listing covers model years 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ford F1, F2 & F3's stock with a 6 cyl. Photo depicts a 1950 Ford F1 6 cyl.
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
  • This listing covers MY's 1948, 1949, 1950 & 1951 Ford F7's and F8's with the stock V8.
    • Single exhaust system consists of the cross-over pipe, Y pipe, muffler and short tailpipe.
     
  • Listing covers model years 1948, 1949, and 1950 Oldsmobile's stock with a 6 cyl.
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
     
  • This listing covers model years 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, and 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1976, 1974, and 1975 Willys/Jeeps models 2WD Trk, 4WD Trk, FC170, J-262, J-264, J-362, and J-364 Gladiator.
    • MY's 1963-65 single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
    • All other MY's consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956,1957, 1958, 1959, 1960, 1961, and 1962 Willys models 6-33, 6-73, 4-63, 4-73, 675, 675A, 685, 685A, Ace Deluxe, Eagle Deluxe, Eagle Custom, 475, VJ2, VJ3 Jeepster, 4x4-63, 4x4-73, 4x4-75, Aero-Lark, 6-226 Deluxe, Custom and Bermuda's stock with either the stock 4 cyl or the stock 6 cyl.
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
     
  • This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, and 1954 Kaiser's. Photo depicts the system for 1951 Kaiser's  with the stock 6 cyl. 
    • Most models consist of the exhaust pipe, muffler and tailpipe.
  • This listing covers MY's 1947, 1948, 1949, 1950, & 1951 Frazer's F47, F485, F486, F495, F496, F505, F506, F515 & F516 with the stock 6 cyl. Photo depicts the system for a 1948 Frazer with the stock 6 cyl. with a 1bbl carb. 
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe
    • 1948 F486 will need to report 1bbl or 2bbl carburetor
    • 1947-48 will need to report if built before or after SN27000
    • If you opt to cut the system, know that both the exhaust pipe and tail pipe will be cut.
  • This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 models CJ-2, CJ-2A, 2WD Trk, 4WD Trk, CJ-3A, CJ-3B, DJ-3A, DJ-3A Dispatcher, 4x4-63, 4x4-73, 4x4-75 SW, F134, 4x2-581 Maverick, C101 Jeepster, CJ-5 Universal Jeep, CJ-6 Universal Jeep, FC150, CJ-3B Universal Jeep, DJ-5, and DJ-6 Universal Jeep's with the stock 4 cylinder engine. Photo depicts the stock single exhaust system for 1950-54 Willy's Jeep PU with the stock 4 cyl. 
    • For some MY's this single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe while other systems consists of an exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1946-1947 Models 2123 Super Clipper, 2126 Custom Super, 2103 Super Clipper Eight, 2106 Custom Super Clipper Eight, 2101 Clipper Eight, 2111 Deluxe Clipper Eight, 2100 Clipper Six, & 2130 Clipper Taxicab/ 1948-1949 Models 2240 Taxi, 2201 Standard Eight, 2202 Super Eight, 2211 Deluxe Eight, 2232 Super Eight,2232 Super Eight Convertible, 2222 Super Eight, 2206 & 2233 Custom Eight, / 1949- 1950 Models 2301, 2302, 2322, 2332 Super Eight's, 2301, 2302, & 2332 Super Eight's / 1951 Model 200 Series 2401, Model 250 Series 2401 Sport Coupe & Convertible, Model 300 Series 2402 & Model 400 Series 2406 / 1952 Model 200 Series 2501, Model 250 Series 2531 Sport Coupe & Conv., Model 300 Series 2502 & Model 400 Series 2506/ 1953 2601 Clipper Standard, 2602, 2606, 300, 400 Sedan, 2611 Clipper Deluxe, 2631, & 300 HT & Conv. / 1954, 1955 and 1956 Clipper, Patrician, Cavalier and Caribbean's with the stock 6 or 8 cyl engine. Photo depicts the system for a 1947 Packard model 2101.
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1946, 1947, 1948,1949, 1950, 1951, 1952, 1953, and 1954 Pontiac's Torpedo, Streamliner, and Chieftain's with the stock 6 cyl or 8 cyl engine. Photos depicts system for MY's 1946-48 Pontiac Torpedo with the stock 6 cyl. w/the tailpipe cut (for shipping savings).
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Models 24, 25, 26, 27, 28 and 29, be specific as to model ID when placing the order.
  • This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, and 1952 Plymouth's Deluxe, Concord, Cambridge, and Cranbrook's with the stock 6 cyl engine. Photo depicts the system for MY's 1949-52 Plymouths with the stock 6 cyl.
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1946, 1947, and 1948 Oldsmobile's with the stock straight 8 and single exhaust,
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
     
  • This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Ford F1, F2, F3, F4, F5 and F6's stock with the V8 and single exhaust. Photo depicts the crossover pipe and Y pipe for 1942-52 F1, F2, & F3's with V8, the muffler and tailpipes vary.
    • Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
  • This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, and 1948 New Yorker and Saratoga's convertibles with the 8 cyl and stock with 2 mufflers. All other body styles were stock with 1 muffler. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, front muffler, rear muffler, and tailpipe.
  • This muffler hanger is used on most 1941-66 Chevy trucks and on 1959-66 GMC trucks & vans. The strap is made of stainless steel. Hangers generally will ship within 1 wk. 
  • This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, and 1951 Fords stock with a 4 cyl or 6 cyl. Photo depicts the stock single exhaust for 1942-46 Ford models 2GA & 6 GA (Special Deluxe & Super Deluxe) with the stock 90HP 6cyl. 
    • Single exhaust consists of exhaust pipe, muffler, and tailpipe.
     
  • This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 Chevy trucks stock with the 6 cyl and single exhaust. The photo is correct to the listing.
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
    • Please specify the vehicle series through the checkout process.
  • This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Nash Ambassador & 600 Series with an L head. This application does not have an exhaust manifold. The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's does not carry the needed clamps. Photo depicts the stock single exhaust system (tailpipe varies between MY's) for 1941-48 Nash Ambassador's with the stock L-head 6 cyl. 
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
       
  • This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Cadillac's. The cross-over portion of this system is part of the manifold.  Photo depicts the system for a 1941 Fleetwood.
    • Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
    • If you do not have the original cast iron 4 bolt flange, you may add a non-cast iron 4blt flange to the order.
  • This listing covers model years 1941, 1942, 1943, 1944, 1945, and 1946 Buick with the straight 8 and dual carburetors. This listing is for MY's 1941-46 with the dual carburetor set up. If your 1941-46 Buick was stock with a single carburetor set-up, refer to listing 568791. Photo depicts the system for a 1941 Buick Super with dual carb set up.
    • System consists of extension pipe, front exhaust pipe (AKA Y pipe), rear exhaust pipe, muffler, and tailpipe.
     
  • This listing covers model years 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, and 1950 Chrysler. This listing excludes Imperial.  See listing 598680 for 1942-49 with 2 mufflers. Photos depicts the system for a 1941 Town and County 9 passenger SW.
    • Single exhaust system included exhaust pipe, muffler and tailpipe.
  • This listing covers model years 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Imperial and Crown Imperial's and 1942, 1943, 1944, 1945, 1946, 1947, and 1948 C36/C39 New Yorker and Saratoga convertible coupe. Photo depicts the system for 1942-48 Chrysler Town & Country convertibles.
    • Single exhaust system consists of the exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe.

Title

Go to Top