- The single exhaust consists of the exhaust pipe, muffler and tailpipe.
- Exhaust pipes is 1½" OD with a 4blt flange.
- Gaskets are NA
- Please note that these tailpipes are 1" OD and will be Mild Steel (1" OD tubing is not available in either aluminized or T409 stainless steel) no matter which material you choose for the system. Also 1" clamps are not available in stainless steel so clamps needed at the tailpipe will be steel (only).
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, and 1934 American Austin's and 1938, 1939, and 1940 American Bantam's. Photo depicts system for MY's 1938-40 Bantam. -
This listing covers model years 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935 w/6 cyl, 1936, 1937, 1939, 1940, and 1941 Hupmobile's. Excludes 1935 w/8 cyl & 1936 w/6 cyl. Photos depicts system for 1933-34 Hupmobile's.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, and 1940 Chevy trucks with a 6 cyl engine. For MY's 1929-32, this system is an alternative to the original 1 pc. design. Photo depicts the stock single exhaust for 1929-31 Chevy ½T with the stock 6cyl.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 192, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Graham except 1938-39 Supercharged 6. See listing 518778 for a Supercharged 6 system. Photo depicts the system for a 1930 Graham Paige.- Single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936,1937, 1938, 1939, 1940, 1941, 1942, 1946, 1947, and 1948 Chevrolet's with the stock 6 cyl. Photos depicts the system for a 1939 Chevrolet Master 4 dr.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- The last 15" of the tailpipe on 1946-48 models will be flatten to an oval shape.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, and 1954 Desoto's stock with a 6 cyl and single exhaust. Photo depicts the system for a 1949 Custom / Deluxe (exc. convertibles or 8 passenger).- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
-
Photo depicts the system for this listing.- The single exhaust for the Super 6 consists of exhaust pipe, muffler and tailpipe. The exhaust pipe is 2"OD and reduces to 1¾"OD at the tailpipe.
- Exhaust pipe will come with a steel 3blt flange. The original was cast iron. If you have the original cast iron flange and would like to reuse it, you will need to send it to us in advance of the system being built.
-
Listing covers MY's 1930, 1931, and 1932 Desoto's stock with an 8 cyl and single exhaust.- Single exhaust system consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1930, 1931, & 1932 Models DC & DG stock with the 8 cyl. and 1 muffler.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1930, 1931, 1932 & 1933 Cadillac's stock with dual exhaust and their respective stock V12 or V16. Photo depicts the stock dual exhaust for 1931-33 Cadillac Models 370A, 370B & 370C with the stock V12.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Exhaust pipes originally used cast iron flanges. We do not have them available and no flanges will come with the system.
- MY 1930 exhaust pipe is stock 2¼" and reduces to 1¾" at the muffler outlets.
- MY's 1931-32 exhaust pipe is stock at 2½" and reduces to 1 7/8" at the muffler outlets.
-
This listing covers model years 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, and 1939 Willys models 98B, 97, 98D, 8-80D, 90, 77, 37, and 38 with the stock 4 cyl or the stock 6 cyl. Photo depicts the stock single exhaust for 1930 Willys 98B.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Pontiac Models 401, 402, 601, 603, 605, 701 Standard and Deluxe, 36-32BA Deluxe, 36-26BB Master, 26-28BA DeLuxe 37-26CA DeLuxe, 37-28CA DeLuxe, 6-DA, 8-DA, Torpedo, and Streamliner's with the stock 6 or 8 cyl engines. Photo depicts the system for a 1930 (only) Pontiac with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1931 models 840 & 845, 1937 models 120C, 120D, 138CD, 1500, 1501, 1502 Super 8 and 1938 Super 8 Packard's. Photo depicts the system for 1937 Packard's (120C, 120CD, 138CD) stock with the 8 cyl. engine.- This single exhaust consists of the exhaust pipe, muffler, resonator w/connector pipe at inlet end (trim to fit), and tailpipe.
-
This listing covers model years 1931, 1932, and 1933 Auburn's with 12 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
Listing covers MY's 1931, 1932, and 1933 Chrysler Imperial's with the stock 8 cyl. Photo depicts the system for a 1933 Imperial CQ- This single exhaust consists of exhaust pipe, muffler, connector pipe (trim to fit), resonator, and tailpipe.
- The exhaust pipe will come with a universal flange. If you have the original cast iron flange, we will need you to send it to us in advance so that we may use it on your reproduction exhaust pipe.
- Waldron's Exhaust will ask for photos of your original exhaust pipe.
-
This listing covers model years 1931, 1932, 1933, 1934, and 1935 Buick's Series 40, 50, 60, 80, 90 with a straight 8. Photo depicts system for 1938 Series 60.- Single exhaust system consists of exhaust pipe, muffler, and tailpipe.
- The exhaust pipe for MY's 1933-35 will NOT come with the 2 clips that were stock from the factory. All other MY's will come with a universal flange. If you have the stock cast iron flange, keep it and reuse it.
-
This listing covers model years 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, and 1939 Royal, Airflow, and Airstream's with the straight 8. Photo depicts the system for a 1936 Chrysler Airflow (only) C10.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe. Please specify model name through the check out process.
-
This listing covers model years 1932 models 905, 906 Twin Six and 1937 models 1506, 1507, 1508, along with 1938 & 1939 Packard's stock with the V12. Photo depicts the system for 1937-39 Packard's with the stock V12.- This single exhaust system starts at the exhaust pipe outlet and consists of the muffler, connector pipe, resonator and tailpipe. The original exhaust pipe is porcelain coated with a heat shield. You will need to make the connection from the manifold to the muffler inlet.
-
Photo depicts the system for manifolds with 45° angle- Single exhaust consists of exhaust pipe, muffler, front tailpipe and rear tailpipe.
- You will be asked to report manifold exit in the ordering process.
-
Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This single exhaust system consists of the exhaust pipe, front muffler , rear muffler and tailpipe.
-
- Single exhaust system consists of the exhaust pipe, muffler, connector pipe (trim to fit), resonator, and tailpipe.
-
This listing covers model years 1932 and 1933 Franklin's with the stock 12 cyl. engine. For 1933 Olympics', models 18 or 18B, refer to listing 453478.
- Single exhaust consists of the cross-over pipe, exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1932, 1933, and 1934 Ford ½T's with the stock flathead V8. Photo depicts the system for 1933-34 Ford ½T's with the stock V8- Single exhaust consists of the crossover pipe, Y pipe, muffler, front tailpipe and rear tailpipe.
-
This listing covers model years 1932, 1933, and 1934 Ford BB 1½T's. Photo depicts the stock single exhaust for 1934 Ford BB 1½T's with the stock 221ci flathead V8, 131"WB & option 2 on the flange rotation with the tailpipe cut to reduce the cost of shipping.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. Report the flange rotation in the check out process.
-
For model years 1932, 1933, and 1934 Ford ½T with the stock 4 cyl engine. During the check out process be sure to let us know how your manifold exits; with a 45° angle or straight exit. System shown in the photo is correct to the listing.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Waldron's Exhaust does not send a flange with this exhaust pipe. Reuse the original 2 pc. cast iron flange when possible.
-
This listing covers model years 1932, 1933, and 1934 Ford's with their respective stock flathead V8 with single exhaust. Photo depicts the single exhaust for 1933-34 Ford's with the stock flathead V8.- This single exhaust system consists of the crossover pipe, Y pipe, muffler, front tailpipe and rear tailpipe. The stock design takes the tailpipe through the rear cross-member.
-
This listing covers MY's 1932, 1933, 1934 & 1935 Lincoln K Series stock with the V12. Photo depicts the stock single exhaust for 1932-33 Lincoln K Series with the stock V12- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Original exhaust pipe was 2¾"OD. In reproduction it will be 2"OD flared to 2¾"OD with a flat flare. We do not have the needed gasket available or the proper flange for this connection. If you have the original cast iron flange, you will want to reuse it.
-
This listing covers model years 1932, 1933, 1934, 1935, 1936, 1937, and 1938 all Terraplane's with the stock 6 cyl. Photo depicts system for 1934-35 Terraplane with the tailpipe cut (for shipping savings).- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- Original cast iron flange is NA. Exhaust pipe will come with universal 2blt flange. If you have the original cast iron flange, keep it and reuse it.
-
This listing covers model years 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Oldsmobile's with the stock 8 cyl. Photo depicts a 1933 Oldsmobile F33.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
Photo is correct to the listing.
- This single exhaust system consist of the exhaust pipe, muffler, connector pipe (that you will trim to fit), resonator, and tailpipe.
-
- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. The exhaust pipe will come with a universal flange. If you have the original cast iron flange, keep and reuse it.
-
This listing covers MY's 1933 & 1934, models 1005, 1006, 1107, 1108, 1935 models 1207 & 1208 & 1936 models 1407 & 1408 Packard's with the stock V12 and a 1 muffler single exhaust.
- Waldron's Exhaust offers the muffler (long body length) and tailpipe. You will need to make the connection from the manifold to the muffler inlet.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Oldsmobile's with the stock 6 cyl. Photo depicts system for a 1933 Olds F33.
- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Waldron's does not have the needed gasket available.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Plymouth's with the stock 6 cyl engine. Photo depicts system for 1936 Plymouth Business Coupe.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1945, 1947, 1948, and 1949 Dodge's with the stock 6 cyl engine. Photo depicts the system for a 1936 Dodge Coupe convertible.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 International C1, D1, D2, C5, C15, D15, K1, K2, KB1, KB2, KB3's stock with the 6 cyl. Photos depicts the system for 1947, 1948 & 1949 International ½T-2T trucks.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Exhaust pipe will come with a universal flange, reuse the original cast iron flange (if possible).