- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, and 1952 Plymouth's Deluxe, Concord, Cambridge, and Cranbrook's with the stock 6 cyl engine. Photo depicts the system for MY's 1949-52 Plymouths with the stock 6 cyl. -
This listing covers model years 1946, 1947, and 1948 Oldsmobile's with the stock straight 8 and single exhaust,- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Ford F1, F2, F3, F4, F5 and F6's stock with the V8 and single exhaust. Photo depicts the crossover pipe and Y pipe for 1942-52 F1, F2, & F3's with V8, the muffler and tailpipes vary.- Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
-
This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, and 1948 New Yorker and Saratoga's convertibles with the 8 cyl and stock with 2 mufflers. All other body styles were stock with 1 muffler. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, front muffler, rear muffler, and tailpipe.
-
Out of stock
This muffler hanger is used on most 1941-66 Chevy trucks and on 1959-66 GMC trucks & vans. The strap is made of stainless steel. Currently unavailable. -
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, and 1951 Fords stock with a 4 cyl or 6 cyl. Photo depicts the stock single exhaust for 1942-46 Ford models 2GA & 6 GA (Special Deluxe & Super Deluxe) with the stock 90HP 6cyl.- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 Chevy trucks stock with the 6 cyl and single exhaust. The photo is correct to the listing.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- Please specify the vehicle series through the checkout process.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Nash Ambassador & 600 Series with an L head. This application does not have an exhaust manifold. The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's does not carry the needed clamps. Photo depicts the stock single exhaust system (tailpipe varies between MY's) for 1941-48 Nash Ambassador's with the stock L-head 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Cadillac's. The cross-over portion of this system is part of the manifold. Photo depicts the system for a 1941 Fleetwood.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- If you do not have the original cast iron 4 bolt flange, you may add a non-cast iron 4blt flange to the order.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, and 1946 Buick with the straight 8 and dual carburetors. This listing is for MY's 1941-46 with the dual carburetor set up. If your 1941-46 Buick was stock with a single carburetor set-up, refer to listing 568791. Photo depicts the system for a 1941 Buick Super with dual carb set up.- System consists of extension pipe, front exhaust pipe (AKA Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, and 1950 Chrysler. This listing excludes Imperial. See listing 598680 for 1942-49 with 2 mufflers. Photos depicts the system for a 1941 Town and County 9 passenger SW.- Single exhaust system included exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Imperial and Crown Imperial's and 1942, 1943, 1944, 1945, 1946, 1947, and 1948 C36/C39 New Yorker and Saratoga convertible coupe. Photo depicts the system for 1942-48 Chrysler Town & Country convertibles.
- Single exhaust system consists of the exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe.
-
This listing covers 1940, 1941, & 1942 Willys Americar with the stock 4cyl engine. Photo is correct to the listing.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing is for 1940 & 1941 Hupmobile Skylark's with the stock 6 cyl. engine.- Single exhaust consists of the front exhaust pipe, rear exhaust pipe (AKA over-axle pipe), transverse muffler, and tailpipe. Waldron's does not offer this exhaust pipe with a flange. You will want to save the original cast iron flange and reuse.
-
This listing is for MY's 1940 and 1941 Graham Supercharged 6 cyl. engine. Photo is correct to the listing.- This single exhaust system consists of the exhaust pipes (1&5/8 OD), dual in/single out resonator (AKA mixing box), connector pipe (2" OD), transverse muffler, and tailpipe (1¾" OD).
- Waldron's Exhaust does not supply flanges with these exhaust pipes. Original flanges are cast iron. Keep and reuse your cast iron flanges.
-
This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955 and 1956 Dodge ½T, ¾T and 1T trucks with the stock 6 cyl. Photo depicts the system for a 1939 Dodge ½T with the stock 6 cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 GMC's with the stock 6 cyl 228ci or 248ci.
- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- This exhaust pipe will not come with the cast iron flange. You will need to reuse your flange. Nor do we have a gasket available.
- The OE muffler hanger, available in checkout, is for MY's 1941-53. It is not OE correct for MY's 1939-40. Currently NA
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Mercury's with the stock flathead V8. Photo shown is the stock single exhaust for a 1937 Ford without the heat exchanger (with TP cut to reduce shipping) & is posted so that you might see the quality of our craftsmanship and the type of bending.- For MY's 1941-48 this single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
- For MY's 1939-40: If your 1939-40 Mercury has the heat exchanger & you intend to reuse it; the system will consist of a cross-over pipe, exhaust pipe, muffler & tailpipe. If your 1939-40 doesn't have the heat exchanger or if it does have it but it is not reusable; the system will consist the 2 pc. Y pipe (AKA cross-over & Y pipe), muffler & tailpipe. You will be asked to report which setup you require in the check out process.
-
This listing covers model years 1938, 1939, 1940, 1941, and 1942 Packard's with a stock 6 or 8 cyl. Photo depicts the system for a 1939 Packard with the stock 6 cyl.- Single exhaust system consist of the exhaust pipe, muffler, and tailpipe.
-
This listing covers 1938 & 39 Graham's stock with the Supercharged 6 cyl. Photos depicted is correct to the listing.- This unique single exhaust system consists of LS/RS exhaust pipes, dual in/single out muffler, and tailpipe. Waldron's includes a universal flanges however it is best to reuse the original cast iron flanges when possible.
-
This listing covers model years 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Studebaker trucks with the stock 6 cyl. Photo depicts the system for 1941-48 Studebaker M5 ½T's with the stock 6 cyl- Complete system consists of exhaust, muffler and tailpipe.
-
This listing covers model years 1936, 1937,1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 Nash Ambassador's with an OHV 6 engine. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Zephyr's. Photo depicts the exhaust system for 1938-48 Lincoln Zephyr with hot water heater.- For MY's 1936-37 this single exhaust consists of the cross-over pipe & Y pipe (2pc. Y pipe), center exhaust pipe, rear exhaust pipe, and muffler with short tailpipe.
- For MY's 1938-48 this single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, and muffler with short tailpipe.