- 1966-70 Riviera exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS resonators w/tailpipes.
- 1971-74 Riviera exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators w/tailpipes.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Riviera with V8 and allows you to delete the stock resonators. Photo depicts the system for a 1966 Buick Riviera with the stock V8 (with rear exhaust pipes cut to reduce shipping). MY's 1967-70 Riviera's take different exhaust pipes at 2¼"OD with flat spots but all other parts shown in the photo are correct. -
Photo depicts the dual exhaust system with resonator eliminator pipes (vs with the stock resonators). For the stock system with resonators refer to SKU 568787.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators eliminator pipes, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
This listing covers 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Wildcat, Electra, Electra 225, and LeSabre's with dual exhaust and 4 mufflers. For Buick Riviera's refer to 1963-74 Buick Riviera section. Excludes 1967-69 Buick LeSabre's which were stock from the factory with a single exhaust system only. Photo depicts the stock dual exhaust for 1972 Buick LeSabre's, Centurion's, Electra's, & Electra 225's with the stock V8 455ci.- Dual exhaust system includes LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers with short tailpipes. Metal-to-metal connection at the manifolds, no gaskets required.
-
This listing covers model year 1956 Buick (only). Photos depicts the system for a 1956 Buick Special's & Century's- The dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. This is a metal to metal connection and does not require any gaskets. It is also flanged through out, so you will only need clamps to use in conjunction with any universal hangers you may order.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1945, 1947, 1948, and 1949 Dodge's with the stock 6 cyl engine. Photo depicts the system for a 1936 Dodge Coupe convertible.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
Waldron's Exhaust reproduces this OE correct muffler hanger. This muffler hanger is correct to:- 1967 Ford Fairlane's (except 289ci & Junior Jewel)
- 1968 Ford Falcon (except for S.W.)
- 1967 Mercury Comet's (except Junior Jewel)
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Use this listing to build your own custom oval muffler. You tell us what you need and we will get it built for you. There will be no returns on custom built mufflers so be sure you triple check your measurements.
-
If you have an Inline 6 cylinder engine in your 1950, 1951, 1952, 1953, 1954, or 1955 Chevy ½T, ¾T or 1T and have always wanted a dual exhaust system then this listing is for you! This system is a direct fit to your cast iron Fenton Chevy 6 cyl headers. This system does not include the cast iron Fenton headers.- This dual conversion kit consists of inboard & outboard exhaust pipes, dual in/dual out muffler and inboard/outboard tailpipes.
- During the check out process, let us know how you would like your tailpipes to exit; out the sides along the quarter panel or straight out the back.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Tempest (up through 1970), Lemans, Grand Prix, Grand Am (beginning in 1972) and GTO's with the stock V8 and dual exhaust stock with 2 mufflers. Excludes MY's 1966-72 with Ram Air or High Output, for those systems please refer to listing 453475. Photo depicts the system for a 1974 Pontiac Grand Prix with a 455ci V8.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- 1964 & 1965 models have options regarding the tailpipes. In the check out process you will be asked to report your desired exit; out the back (toward the bumper) or exit out behind the rear wheels (designed to fit up to the split chrome tips that we do not offer). You will also be asked to report the desired tailpipe diameter.
- For MY's 1970-74; this system does not include the chrome tips. We suggest you contact Ames Performance Engineering.
-
This listing covers model years 1975, 1976, 1977, and 1978 Mark IV and Mark V's. Photo depicts the dual cat-back system for a 1978 Mark V stock with converters on both manifolds. This photo was taken long ago and shows the resonator inlet pipe as a separate pc. We now have patterns for the LS/RS resonators and that pipe is now an integral part of the resonators.- Dual cat-back exhaust system consists of the H pipe (2 pc.), LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe. Please be certain to specify if your Mark is stock with 1 or 2 cats during the check our process.
-
This listing covers model years 1972, 1973, and 1974 Torino's and Ranchero's stock with a V8 and dual exhaust. 1972-74's stock with the 429ci were stock with a single exhaust only. Photo depicts the stock dual exhaust for 1972 Torino's (exc. Ranchero & SW) with the stock 351C V8- Dual exhaust system consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes. Chrome tips are not included. This system is a metal-to-metal connection at the manifolds and does not require gaskets.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, and 1974 Thunderbird's. Excludes 1972 and 1973 T-birds which were stock with a single exhaust. Photo depicts the system for a 1967 Thunderbird with the stock 390ci.- Dual exhaust consists of an H pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipes. H pipe may be NORS.
-
This listing covers model years 1958, 1959, 1960, 1961, 1962, and 1963 Thunderbird's with the stock V8 and dual exhaust with 2 mufflers. This listing is the stock set up for 1962 Thunderbird's with a 6 bbl carburetor. For the stock set up 1962 Thunderbird's stock with a 4 bbl carburetor and for MY 1961 refer to 518725. If you have a 1961 and want to eliminate the resonator, this is the listing to be used. Photo depicts the dual exhaust system for 1963 Ford Thunderbirds with the stock V8- Dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, and LS/RS mufflers with tailpipes.
- MY 1963 will be asked to report the type of gasket needed (flat or donut) in the check out process.
-
This listing covers model years 1932, 1933, and 1934 Ford's with their respective stock flathead V8 with single exhaust. Photo depicts the single exhaust for 1933-34 Ford's with the stock flathead V8.- This single exhaust system consists of the crossover pipe, Y pipe, muffler, front tailpipe and rear tailpipe. The stock design takes the tailpipe through the rear cross-member.
-
This listing covers model years 1960 & 1961 (without Ram Induction), 1962, 1963, and 1964 300's with dual exhaust and mufflers only (no resonators). If your 1960-61 Chrysler 300 was stock with Ram Induction refer to SKU 5987697. If your 1962-64 Chrysler 300 is stock with the Cross Ram engine, refer to listing 598702. Photo depicts the system for 1963-64 Chrysler 300's.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- We received many inquiries regarding this system fitting 1963-64 New Yorker's. It will NOT due to the fact that the engine on the New Yorker's sits 1" higher to the manifold.
-
This listing cover model years 1965, 1966, 1967, 1968, and 1969 full size Chevy Bel Air, Impala, and Caprice's with the stock V8. The 283ci, 237ci, std. 396ci, and std. 427ci. V8's were all stock with resonators. Select this system if you would like to eliminate the resonators (refer to listing 588615 for the true stock dual exhaust). This is the stock exhaust system for a 396 SHP and 427 SHP V8. Photo depicts a system true to this listing. Pipes vary depending on the engine and body style.- Dual exhaust system consists LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1961 & 1962 Buick Skylarks and Specials with a stock V8 and 4bbl carburetor. Refer to listing 568812 for the 2BBL set-up. Photo depicts the stock single exhaust for1962 Buick Skylarks with the stock 215ci V8 and 4bbl carburetor.- System consists of Y pipe, rear exhaust pipe, transverse muffler, and tailpipe. Some Y pipes are NORS only.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron's Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
-
This listing covers MY's 1957, 1958, 1959, 1960 ,1961, 1962/ 1963, 1964, 1965, and 1966 Chrysler Imperials. MY 1959 - we will need to know your VIN due to mid-year change. MY's 1959-61 - we will need to know type of suspension. Photo depicts the system for 1962-66 Chrysler Imperials.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailpipes.
- When installing the system for 1957 and 1958 Imperial's (except convertibles and 4 dr. hardtops) the transmission crossmember will need to be removed in order to install the resonators.
-
Waldron's Exhaust reproduces these OE correct tailpipe hangers. Hangers generally ship out within 1 wk. : Ford Fairlane & Torino For MY's 1967, 1968 & 1969 these tail pipe hangers were used on all set-ups with the LS hanger being used on all single exhaust systems. For MY 1970 stock with a single this fits all 6 cyl. systems and 302ci & 351ci V8's (only) EXCLUDES S.W., Ranchero, the 429ci Std. engine, GT Hardtops, convertibles, Cobra Hardtop & those stock with a standard transmission built after 11-10-69. For MY 1970 stock with a dual exhaust this TP hanger set EXCLUDES S.W., Ranchero's, the 429ci Std engine, GT Hardtops, convertibles, Cobra Hardtop & those stock with a standard transmission built after 11-10-69. For MY 1971 stock with a single this fits all 6 cyl. systems and 302ci & 351ci V8's (only) EXCLUDES S.W. & Ranchero w/351ci. For MY 1971 this TP hanger set EXCLUDES S.W., Ranchero & Cobra HT's w/429ci., GT Hardtop & conv., & Cobra HT. Hangers will generally ship within 1 wk. -
Waldron's Exhaust reproduces this OE correct muffler hanger which was stock on multiple systems. Order the amount needed. This hanger fits:- 1967-68 Ford 6 cyl, 8 cyl single exhaust & LS/RS dual exhaust at the muffler outlet.
- 1967-71 Ford Thunderbird LS/RS dual at the muffler outlet.
- 1969-71 Lincoln Mark III LS/RS dual at the muffler outlet.
- 1967-68 Mercury 8 cyl single & LS/RS dual at the muffler outlet.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Inlet & outlet nipples cannot be any longer than 7"
- Regarding 4" round mufflers with an offset in/offset out position; the nipples cannot be any larger than 1½"ID
- Regarding 4" round mufflers with a center in/center out position: the nipples cannot be any larger than 2¼"ID
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Select this option for a stock 5" or 6" round muffler with a body length less than 30". The checkout process will ask questions regarding your application and muffler will be built to those specifications.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Montego's, Cyclone's, Cyclone GT's with their respective stock V8; 390ci 302ci, 428CJ, 351ci, 429ci, 429CJ or 429SCJ. Photo depicts the stock dual exhaust for 1969 Mercury Montego's & Cyclones with the stock 390ci.- This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing covers model years 1968, 1969 , 1970, 1971, and 1972 Chevy C10, C20, and C30's with the stock V8 396ci or 402ci engines and a wheel base of 127". If you have a 115" or 133"WB, we cannot help you out with the exhaust pipes (no patterns at this time). We can help you out with muffler and tailpipes (only). For pricing, please give us a call. Photo depicted fits 1969-72 Chevy C10/C20/C30 w/396ci w/127" with rear leaf springs.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. These exhaust pipes are 2½" and system then reduces to 2" at the tailpipes.
- During the check out process be sure to specify if truck has rear coil or leaf springs.