- For MY's 1928-31 the single exhaust system consists of exhaust pipe, muffler and tailpipe. You will be asked to report the angle of your manifold in the check out process.
- For MY’s 1932-33 the single exhaust system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Trimming may be required to fit exhaust pipe to the manifold. OE system was flanged connected between front and rear exhaust pipes but our system will be a “slip-fit” design. Waldron’s does not offer a gasket for this system.
- For MY's 1934-40 the single exhaust system consists of exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1938, 1939, and 1940 Cadillac's with the stock single exhaust stock with 1 muffler. Excludes Model 65. MY's 1936 & 1937 V8's are stock with muffler & resonator. Photo depicts the single exhaust system for 1932-33 Cadillac's with the stock V8 -
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Cadillac's. The cross-over portion of this system is part of the manifold. Photo depicts the system for a 1941 Fleetwood.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- If you do not have the original cast iron 4 bolt flange, you may add a non-cast iron 4blt flange to the order.
-
This listing covers model years 1949, 1950, and 1951 Cadillac's with the stock V8. Photo depicts the system for 1949 Cadillac's.- Single exhaust system consists of the cross-over pipe (manifold to manifold), exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1930, 1931, 1932 & 1933 Cadillac's stock with dual exhaust and their respective stock V12 or V16. Photo depicts the stock dual exhaust for 1931-33 Cadillac Models 370A, 370B & 370C with the stock V12.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Exhaust pipes originally used cast iron flanges. We do not have them available and no flanges will come with the system.
- MY 1930 exhaust pipe is stock 2¼" and reduces to 1¾" at the muffler outlets.
- MY's 1931-32 exhaust pipe is stock at 2½" and reduces to 1 7/8" at the muffler outlets.
-
This listing covers model years 1936, 1937, 1938, 1939, and 1940 Cadillac's with stock single exhaust with 2 mufflers. Excludes Model 65 as we do not have patterns. Photo depicts the system for a 1937 Cadillac 70 Series.- For Model's 60, 60S, 70 & 75 this system consists of the front exhaust pipe, rear exhaust pipe, front muffler, over-axle pipe, rear transverse muffler w/long inlet pipe, tailpipe and bracket.
-
This listing covers model years 1952, 1953, 1954, 1955, and 1956 Cadillac's (all series and all body styles) with stock dual exhaust with 4 mufflers. Photo depicts the system for 1952-53 Cadillac coupes and convertibles.- Dual exhaust system includes - LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, LS/RS tailpipes. Tailpipes will fit into the factory tips located in the bumper. These tips are not part of the package.
- For Series 75 and Commercial Chassis, this will not be a direct fit. We do not have all the patterns needed (in these model years) for Commercial Chassis or Series 75. If you have a 1952-56 Series 75 or Commercial Chassis we will supply you with a couple pieces of straight tubing. You will then need to modify the system to fit.
- If you have original pipes still on your 1952-56 Cadillac Series 75 or Commercial Chassis, please give us a call at 800-503-9428.
-
This listing covers model years 1957, 1958, 1959, and 1960 Cadillac's stock with a dual exhaust with 4 mufflers. Photo depicts the system for MY's 1959-60 Cadillac's except 75 Fleetwood and Eldorado Brougham (front connector pipe varies for the Fleetwood, rear connector pipe varies for the Brougham).- Dual exhaust system consists LS/RS front exhaust pipes, LS/RS rear exhaust pipe, LS/RS front mufflers, LS/RS front connector pipes, LS/RS center connector pipes, LS/RS rear connector pipes, LS/RS rear mufflers, LS/RS tailpipes. 1957 models will fit into the factory tips located in the bumper. 1958-60 are stock with turndowns.
-
This listing covers model years 1961, 1962, 1963, and 1964 Cadillac V8 with single exhaust. Photos depicts 1964 Cadillac's except 75 Fleetwood's and Commercial Chassis.- This single exhaust system consists of the Y pipe, muffler, front connector pipe, rear connector pipe, resonator and tailspout.
-
This listing covers model years 1965, 1966, and 1967 Cadillac Calais, Deville, Fleetwood, and Commercial Chassis with V8 and single exhausts. Photo depicts the system a 1966 Cadillac. The rear exhaust pipe varies between models.- Single exhaust system contains front (Y) exhaust pipe, center exhaust pipe w/ long *resonator, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1968, 1969, and 1970 Cadillac Calais, Deville, Fleetwood, and Commercial Chassis' with V8 and stock single exhaust. Photos depicts the system for 1968 Calais' and Deville's.- Single exhaust consists of Y pipe, rear exhaust pipe, muffler, connector pipe, resonator and short tailpipe.
-
This listing covers model years 1971, 1972, 1973, and 1974 Cadillac Calais, Deville, and Fleetwood 60 with V8 and stock single exhaust. Photo depicts the stock single exhaust for 1973-74 Cadillac Calais' & Deville's.- System consists of the Y pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe. Some Y Pipe are NORS only.
-
This listing covers model years 1971, 1972, 1973, and 1974 Fleetwood 75 and Commercial Chassis' with V8 and stock single exhaust. Excludes Fleetwood Eldorado. Photo depict the single exhaust (all but the customers catalytic converter) for 1975-76 Fleetwood 75.- This single exhaust system consists of the Y pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Calais, Deville and Fleetwood's with a V8 and stock single exhaust. Excludes diesel engines. Photo depicts the system for 1975-76 Calais' and Deville's. Photo does not show the catalytic converter which is located between the Y (AKA front exhaust) pipe and rear exhaust pipe and must be in place for system to fit properly.- This single exhaust system consists of front (Y) exhaust pipe, rear exhaust pipe, front muffler, connector pipe, and resonator w/tailspout.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Fleetwood 75 and Commercial Chassis V8 with single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and short tailpipe.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Calais, Deville and Fleetwood's with diesel engines. Diesel exhaust system does not have a catalytic converter. Excludes Eldorado's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of front exhaust pipe, center exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1977, 1978, and 1979 Calais, Deville, and Fleetwood's with stock single exhaust. Listing does not cover Fleetwood Eldorado or Commercial Chassis Cadillac's. Photo depicts the stock cat-back single exhaust for 1977-79 Cadillac's (except Fleetwood Eldorado's & Diesel Engines) with the stock V8.- This cat-back single exhaust system consists of a rear exhaust pipe, front muffler, connector pipe and rear muffler with tailpipe.
-
This listing covers model years 1986, 1987, 1988, 1989, 1990, 1991, 1992, and 1993 Deville's and Fleetwood Brougham's with V8 and single exhaust. Photo depicts the stock cat-back single exhaust for 1993 Fleetwood Broughams with the stock 5.7L with all parts being NORS.- Single exhaust cat-back system consists of rear exhaust pipe, muffler, connector pipe, resonator and tailpipe.
- All or some parts may be NORS.
-
This listing covers model years 1967, 1968, 1969, and 1970 Eldorado's with a stock dual exhaust. Photo depicts the system for 1970 Eldorado's- Dual exhaust system consists of LS/RS front, LS/RS rear exhaust pipes, dual in/single out transverse muffler, and LS exit tailpipe with resonator.
-
This listing covers model years 1971, 1972, 1973, and 1974 Fleetwood Eldorado's stock with a single exhaust. Photo depicted is correct to the listing.- System consists of LS/RS front exhaust pipes, rear exhaust (Y) pipe, front muffler, connector pipe, rear muffler and 1 short tailpipe.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Seville's stock with single exhaust. Excludes diesel engines. Photos depicts the cat-back system for a 1976 Seville.
- This single cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe. LS/RS front exhaust pipes & converter not included. For availability and pricing, please give us a call.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Eldorado's. Photo depicts the cat-back system for 1975-78 Fleetwood Eldorado's.- Cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and short tailpipe. If converter and/or pipes off the manifold are needed, please give us a call for pricing and availability.
-
This listing covers model years 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Seville's with a diesel engine. Diesel system does not require catalytic converter. Photo depicts the stock single exhaust system for 1978-79 Cadillac Seville's with the stock 350N diesel engine.- For MY's 1978-79 this single exhaust system consists of the front exhaust pipe, rear exhaust pipe, resonator, connector pipe, single in/single out transverse muffler with tailpipe.
- For MY's 1980-85 this single exhaust consists of LS/RS front exhaust pipes, center exhaust pipe (AKA Y pipe), rear exhaust pipe, front muffler, connector pipe, rear muffler w/tailspout. Y will be NORS.
-
This listing covers model years 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Eldorado's with a diesel engine. Diesel system does not require a converter. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- System consists of front exhaust pipe, center exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler with tailpipe. Y pipe NORS.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 Seville's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Cat back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe. If LS/RS front exhaust pipe, Y pipe or converter is needed, please call for pricing and availability.
-
This listing covers model years 1986, 1987, 1988, and 1989 Seville's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Cat-back system consists of rear exhaust pipe, connector pipe, muffler and tailpipe. If crossover pipe, Y pipe and/or converter are needed, please call for pricing and availability.
-
This listing covers model years 1986, 1987, 1988, 1989, 1990, and 1991 Eldorado's. Excludes the Sport Exhaust which has tailpipes. Photo depicts the stock cat-back single exhaust for 1988-89 Eldorado's.- Cat-back single exhaust system consists of rear exhaust pipe, connector pipe, single in/out transverse muffler, tailpipe. If front exhaust, center exhaust and/or converter are needed, please call for pricing and availability.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936,1937, 1938, 1939, 1940, 1941, 1942, 1946, 1947, and 1948 Chevrolet's with the stock 6 cyl. Photos depicts the system for a 1939 Chevrolet Master 4 dr.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- The last 15" of the tailpipe on 1946-48 models will be flatten to an oval shape.
-
This listing covers model years 1955 and 1956 Bel Air's 265ci V8 and stock dual exhaust. This listing excludes 1955-56 Chevy Station Wagon's & Sedan Delivery's which are stock with a single exhaust only. Refer to 588604 for the stock single exhaust. Photo depicts the stock dual exhaust system for a 1955 Bel Air with the stock 265ci V8.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Bel Air, Impala, Biscayne, Delray, Nomad, 150 and 210's with a V8 and stock single exhaust.- Single exhaust system consists of the front exhaust pipe (AKA Y pipe), exhaust pipe, muffler and tailpipe.
-
This alternative design dual exhaust system is a Waldron's Exhaust exclusive and eliminates the crossover pipes and Y pipes. For the true stock exhaust. refer to 588606. Photo depicts the alternative exhaust system for a 1957 Chevrolet convertible.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
Photo is correct to the listing. If you aren't concerned about staying true to the stock system and would like to eliminate the cross-over pipe & Y pipes or if you have late model motor mounts; refer to 588605.- This listing is for the original stock design with the early model motor mount and consists of LS/RS crossover pipes, LS/RS Y pipes, LS/RS mufflers and LS/RS tailpipes.
- It has been brought to our attention that vehicles using the late model motor mounts will have fitment issues with the cross-over pipes and we suggest that you order the alternative design or be prepared to make modifications.
-
- This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes & LS/RS rear tailpipes (tailpipes were 1 pc. from the factory but are so long that we must use 2 pc. of tubing to reproduce).
- This system requires 4 gaskets.
-
This listing covers model years 1959 and 1960 Chevy Full Size Bel Air, Biscayne and Impala with the stock dual exhaust but with the stock resonators eliminated. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators eliminated, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1959 and 1960 Bel Air, Biscayne, and Impala's with the stock V8 283ci, 348ci or 348HP and a dual exhaust with 2 mufflers and 2 resonators. Photo depicts the stock dual exhaust system for 1960 9Passenger SW's with the stock non-HO 348ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1961, 1962, 1963, and 1964 Chevy Impala, Bel Air, Biscayne, and Super Sport's stock with the V8 283ci, 327ci (small or big block), 348ci (small or big block), and 409ci (big block) with the a stock dual exhaust (which was stock w/2 resonators). Photo depicts the system for MY's 1960-64 Chevy full size stock with the small block 283ci or 327ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- Big Block engines will have an additional $40.00 cost added to system price.
- Our pattern exhaust pipes have the piece that some call an extension (we call it an insert) incorporated into the exhaust pipes. If you would prefer to have the insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1961, 1962, 1963, and 1964 Chevy Impala, Bel Air, Biscayne, and Super Sport's with the stock V8 283ci, 327ci (small or big block), 348ci (small or big block), and 409ci (big block) and allows you to eliminate the resonators (all MY's & body styles were stock with resonators). Photo depicted is correct to the listing but pipes vary slightly depending on engine displacement, body style, etc.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes, and LS/RS tailpipes.
- Big Block engines will have an additional cost of $40.00 added to system price.
- Our pattern exhaust pipes have the piece that some call an extension (we call it an insert) incorporated into the exhaust pipes. If you would prefer to have the insert/AKA extension a separate part, you may choose so in the check out process.