- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, and 1951 Fords stock with a 4 cyl or 6 cyl. Photo depicts the stock single exhaust for 1942-46 Ford models 2GA & 6 GA (Special Deluxe & Super Deluxe) with the stock 90HP 6cyl. -
This listing covers model years 1972, 1973, and 1974 Fairlane, Torino, and Ranchero's with a V8 and single exhaust. Photo depicts the stock single exhaust for a 1972 Ford Torino stock with a 400ci V8.- For the SW or Ranchero; single exhaust consist of the Y pipe, muffler, front tailpipe, and rear tailpipe. Y pipe may be NORS.
- For all other body styles: single exhaust system consists of Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1952 (still referred to as F1, F2, & F3), 1953, 1954, 1955, and 1956 Ford F100, F250 & F350's stock with a 6 cyl. Photo depicts the system for 1954-55 F100, F250 or F350 with a stock 6 cyl.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
-
Listing covers 1975, 1976, & 1977 Ford Maverick's with the stock 6 cyl or V8 and begins behind the converter. Photo depicts the stock cat-back single exhaust for 1977 Ford Mavericks with the stock 250ci 6cyl with the 12" catalytic converter.- Cat-back system consists of the rear exhaust pipe, resonator, connector pipe, and muffler w/tail spout.
- MY 1977 will need to report stock catalytic converter body length (7¼" or 12") in the check out process.
- If you are in need of the pipes forward of the converter and/or the converter, please give us a call for availability and pricing.
-
This listing covers 1936 & 1937 GMC ½T trucks with the stock Olds 213ci 6 cyl. Photo shows the stock single exhaust system for 1936-37 GMC ½T's with the Olds 213ci where the muffler sits outside the frame rail.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- Waldron's does not have the gaskets available for this system.
- In the ordering process, you will be asked to report where the muffler sits on your system (inside or outside of the frame rail),
-
Photo is correct to this stock dual exhaust listing.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
This listing covers model years 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965 & 1966 American's with stock the L Head cyl. Photo depicts the system for 1965-66 American's with the stock 6 cyl L head.- Single exhaust system consists of an exhaust pipe, muffler and tailpipe.
- Waldron's does not provide the clamps needed to attach the manifold pipe to the engine nor do we have the needed gasket available. Give us a call for contacts, if needed.
-
This listing covers model years 1957, 1958, 1959, 1960 Rambler American, 1961, 1962, 1963, 1964 Rambler, American & Classic, 1965 & 1966 American, Classic along with Nash Marlin & Ambassador stock with the OHV 6 cyl. Photo depicts the stock single exhaust for 1964 AMC American's stock with the OHV 6cyl 196ci (except convertibles & station wagons).- For MY's 1957-63 (exc. 1962-63 convertibles) this single exhaust system consists of the exhaust pipe, muffler, and tailpipe. 1962-63 convertibles take a front exhaust pipe, rear exhaust pipe, muffler, and tail pipe.
- For MY's 1964-66 these single exhaust systems vary between models and body styles, with some set-ups having a transverse muffler.
- MY's 1957-60 all body styles except station wagon's need to report whether the car was stock with or without a wheel carrier.
-
This listing covers model years 1956, 1957, and 1958 Century, Special and Super's. Photo depicts the system for a 1956 Buick Special Model 41 (with the tailpipe cut)- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1960 and 1961 Buick LeSabre, Invicta, Electra and Electra 225 with V8 dual exhaust and a transverse muffler. Photo depicts the stock dual exhaust for 1961 Buick Invicta's & LeSabre's with the stock V8.- The dual exhaust consists of the LS/RS front exhaust pipes (flange connected to the rear exhaust pipes), LS/RS rear exhaust pipes (flange connected to the transverse muffler inlets), dual in/dual out transverse muffler, and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gasket required.
-
This listing covers 1961, 1962 & 1963 Skylark's and Special's stock with the stock V8 & 2bbl (for MY 1963 the type of carburetor does not matter) carburetor along with 1962 & 1963 Special's stock with a V6. Refer to listing 568813 for the 1961-62 4bbl set-up. Photo depicts the single exhaust system for 1962 Buick Specials with the stock 215ci V8 and 2bbl carburetor.- System contains Y pipe, rear exhaust pipe (our pattern pipe is 2 pcs vs the original 1 pc. long pipe), transverse muffler, tailpipe. Metal-to-metal connection at the manifolds, no gaskets required. Y pipe may be NORS.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron's Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
-
This listing covers model years 1930, 1931, 1932 & 1933 Cadillac's stock with dual exhaust and their respective stock V12 or V16. Photo depicts the stock dual exhaust for 1931-33 Cadillac Models 370A, 370B & 370C with the stock V12.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Exhaust pipes originally used cast iron flanges. We do not have them available and no flanges will come with the system.
- MY 1930 exhaust pipe is stock 2¼" and reduces to 1¾" at the muffler outlets.
- MY's 1931-32 exhaust pipe is stock at 2½" and reduces to 1 7/8" at the muffler outlets.