- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear (over-axle) exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes. Designed to fit with the stock chrome tips which are not included with the system.
- The standard engines take a system that starts out at 2"OD on the front exhaust pipes (with 2blt flanges), then increases to 2¼"OD on the rear exhaust pipes, and reduces back to 2"OD on the tailpipes.
- The Ram Air or HO systems are 2¼"OD up to the muffler inlets and then reduces to 2"OD on the tailpipes.
- You will be asked to report with or without RA or HO manifolds along with bolt pattern needed for RA/HO systems in the check out process. There will be an additional cost of $89.00 for the Ram Air / HO systems. If you need the cast iron flanges, you may add them to your order in the check out process. If you already have the need set, you will need to mail them to us in advance (address is shown in the check out form).
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Firebird, Firebird Trans Am, and Firebird Formula's stock with the V8 (except 455ci Super Duty) and dual exhaust. Photo depicts the system for 1970-72 Firebirds (Non HO or Ram Air). -
This listing covers model years 1920, 1921, 1924, 1925, 1926,1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Erskine, Commander, Dictator, model 54, model 55, model 56, Champion, Land Cruiser, Hawk, and Lark's with the stock 6 cyl. For MY's 1922-23 we have the exhaust pipe pattern (only). If interested in pricing, please give us a call. Photo depicts the stock single exhaust for 1959-60 Studebaker Lark Convertibles with the stock 170ci 6cyl.- For MY's 1920-58 this single exhaust consists of exhaust pipe, muffler, and tailpipe.
- For MY's 1959-66 All Models Except Convertibles & 1963-66 Station Wagon's with a sliding roof this single exhaust consist of exhaust pipe, muffler, and tailpipe.
- For MY's 1959-66 Convertibles & 1963-66 Station Wagons with a Sliding Roof this single exhaust consists of the exhaust pipe, muffler, front tailpipe & rear tailpipe. Do NOT select the cut option on this systems.
- 1963-66 Station Wagons will be asked to report whether your Station Wagon was or was not stock with the sliding roof in the check out process.
-
This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, and 1946 President, Commander, and Dictator with the stock straight 8 and single exhaust. Photo depicts the stock single exhaust for 1938 Lincoln Presidents with the stock Straight 8- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Commander, President, Golden Hawk, Hawk, and Lark's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for 1964 Commander Lark Station Wagon w/spin-on oil filter, w/o a sliding roof and the stock 289ci V8. Single exhaust consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and from here it varies, some models have a tailpipe while others have a front and a rear tailpipe.- 1958 Sedans will need to report whether it is a “long wheel base sedan” or “except long wheel base sedan”.
- 1963 & 1964 Larks will need to report which type of filter is stock; spin-on filter or cartridge filter.
- 1964-66 Lark Station Wagons will need to report whether your SW has a sliding roof or not.
-
This listing model years 1966, 1967, 1968, 1969, 1970, 1971, and 1972 models J-262, J-264, J-362, J-364 Gladiator's, J-162, J-164 Station Wagon & Panel Delivery with the stock V8 304ci, 350ci, or 360ci. Photo depicts the system for a 1970 Jeep Wagoneer.- Single exhaust system consists of LS crossover pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ford F1, F2 & F3's stock with a 6 cyl. Photo depicts a 1950 Ford F1 6 cyl.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1960, 1961, 1962, 1963 with the stock 6 cyl., 1964, 1965, and 1966, stock with the 4 cyl. or the 6 cyl., 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 Chevy C10, K10, C20, K20, C30, and K30's stock with the 6 cyl engine. Photo depicts the stock single exhaust for 1962 Chevy C10's Series 14 2WD with the stock 6cyl .- System consists of the exhaust pipe, muffler & tailpipe.
- For MY's 1960-62, please specify whether your vehicle has a short side exit tailpipe or a longer rear exit tailpipe during the check out process.
-
This listing covers MY's 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Meteor (MY's 1962-63 only) & Comet's, including the Cyclone, Caliente and GT's, with their respective stock 144ci, 170ci, 200ci, and in 1969, the 250ci 6 cyl engine. Photo depicts the system for MY's 1963-65 Comet's with the stock 200ci.- MY's 1960-65: system consists of the front exhaust pipe, rear exhaust pipe, and muffler w/tailspout.
- MY 1966: system consists of the front exhaust pipe, rear exhaust pipe (turns in board), and transverse muffler w/tailspout.
- MY's 1967 & 1969-70: system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY 1968: system consists of the front exhaust pipe, rear exhaust pipe w/muffler, and tailpipe.
- MY's 1971-74: system consists of the front exhaust pipe, center exhaust pipe, rear exhaust pipe, and muffler w/tailspout.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
-
Set of 4 OEM style hangers - 2 at the muffler and 2 at the tailpipes. Kit includes OEM correct rear tail pipe clamps. This set of OEM style hangers will fit all 1964-72 GM A-Body styles. Excluding Vista Cruisers and/or Station Wagons. Muffler hangers : ALL 68-72 A body / $49 per pair Tailpipe hangers: 64-67 Cutlass & 442 (without chambered tailpipe): $34 per pair 68-9 Olds 442 (for chrome tips): $57 per pair 68-69 Cutlass (without chrome tips): $45 per pair 70-72 Olds 442: $57 per pair 70-72 dual without bumper cutouts or trumpets: $45 per pair 70-72 Chevelle dual (without resonators or chrome tips): $45 per pair 68-71 Pontiac LeMans/Tempest/GTO: $57 per pair To order individual components, please call us at 800-503-9428. Hangers generally will ship within 1 wk. -
Waldron's Exhaust reproduces this OE correct hanger. Used at the rear exhaust pipe on all full size Fords, single and dual systems, 6 cyl. and V8's, in 1963. Simply order the amount needed. Hangers generally ship out within 1 wk. -
This listing covers MY's 1955 and 1956 Packard Patrician, Caribbean, 400, Executive, Clipper Super, & Custom's with the stock V8. Excludes 1955 Packard convertibles which we do not have the needed patterns to reproduce at this time. Photo depicts the dual exhaust system with resonators for a 1956 Packard Patrician or Caribbean with the stock V8- Dual exhaust consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes with resonators built in.
- Waldron's does not offer a "with cut pipes" option on this dual exhaust.