- Single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, front tailpipe, and rear tailpipe.
-
This listing covers model years 1957, 1958, 1959, and 1960 Olds 88 and 98's with the stock V8 and single exhaust w/1 mufflers. Excludes station wagons, refer to listing 428534. Photo depicts the stock single exhaust for 1959-60 Oldsmobile 88's with the stock V8 -
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds F85 and Cutlass' with the stock V8 stock dual exhaust or for MY's 1965-74 you may convert your single exhaust to a dual exhaust. We will supply you with the needed blocker plate. For MY 1964 this dual exhaust is for F85's /4-4-2 STOCK with a dual exhaust. We do NOT offer a single-to-dual conversion. If your 1964 Cutlass/F85 was stock with a single than we can help you out with a single exhaust (only). Photo depicts the system for a 1971 Cutlass 4-4-2 with the stock 455ci engine.- This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- You will be asked to report the stock set-up in the the check out process.
- 1964-67 models will be required to report the inside diameter of the driver side manifold.
-
This listing helps you convert your 1949, 1950, 1951, 1952, 1953, 1954, and 1955 Oldsmobile with stock single exhaust to a dual exhaust system. Excludes models with Power Brakes. Our patterns do not accommodate vehicles with power brakes. If your 1949-55 Olds has power brakes, this system will not fit. Photo depicts the dual conversion system (with mufflers) for 1953-55 Olds with the stock V8. Photo shows a system that the tail pipes have been cut to reduce the shipping cost (and can also make installation easier).- The dual conversion exhaust kit consists of LS front & rear exhaust pipes, RS exhaust pipe, LS/RS glasspacks, LS/RS tailpipes, gaskets and clamps. We will provide a blocker plate for MY's 1954-55. This kit does not come with the hangers.
-
This listing covers model years 1946, 1947, 1948,1949, 1950, 1951, 1952, 1953, and 1954 Pontiac's Torpedo, Streamliner, and Chieftain's with the stock 6 cyl or 8 cyl engine. Photos depicts system for MY's 1946-48 Pontiac Torpedo with the stock 6 cyl. w/the tailpipe cut (for shipping savings).- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Models 24, 25, 26, 27, 28 and 29, be specific as to model ID when placing the order.
-
This listing covers model years 1961, 1962, and 1963 Lemans and Tempest's stock with a 4 cyl engine. Photo depicts the stock single exhaust for 1962 Pontiac Lemans & Tempest with the stock 4 cyl engine and 4bbl carburetor.- Single exhaust consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. Crossover pipe will be mild steel due to unique pipe diameter of 1&1/8"OD.
- Waldron's Exhaust does not have the needed gaskets available.
- 1962 and 1963 models will be asked to report the stock carburetor set-up in the check out process.
-
This listing covers model years 1920, 1921, 1924, 1925, 1926,1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Erskine, Commander, Dictator, model 54, model 55, model 56, Champion, Land Cruiser, Hawk, and Lark's with the stock 6 cyl. For MY's 1922-23 we have the exhaust pipe pattern (only). If interested in pricing, please give us a call. Photo depicts the stock single exhaust for 1959-60 Studebaker Lark Convertibles with the stock 170ci 6cyl.- For MY's 1920-58 this single exhaust consists of exhaust pipe, muffler, and tailpipe.
- For MY's 1959-66 All Models Except Convertibles & 1963-66 Station Wagon's with a sliding roof this single exhaust consist of exhaust pipe, muffler, and tailpipe.
- For MY's 1959-66 Convertibles & 1963-66 Station Wagons with a Sliding Roof this single exhaust consists of the exhaust pipe, muffler, front tailpipe & rear tailpipe. Do NOT select the cut option on this systems.
- 1963-66 Station Wagons will be asked to report whether your Station Wagon was or was not stock with the sliding roof in the check out process.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, and 1969 Dodge D100, W100, D200, W200, D300, & W300's, 1970 & 1971 D100, D200, D300 & W300's stock with the V8 except the 383ci as the Y pipe for the 383ci has never been reproduced for this MY's. Give us a call to see what we can do for you at 800-503-9428. Photo depicts the stock single exhaust for 1967-68 D100 ½T's & D200 ¾T's Regular Cab with 127" WB and the stock 318ci V8- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
- For 1961-64 models, this system is for conventional cabs only.
- 1965-68 models will be asked to report the serial number. We will need to know if it falls before or after SN 166800. The difference being that early models require flat gaskets at the manifold while the later models are a metal-to-metal connection at the manifold.
- 1969-71 models will be asked to report whether the truck is stock with or without a cowl.
-
This listing covers MY's 1957, 1958, 1959, and 1960 Dodge D100, D200, D300 or W300 stock with the stock 318ci V8 and short tailpipe that dumps out before the rear axle. Photo is correct to the listing for all 1957-60 D100, D200, D300 & W300 with the stock 318ci and Y pipe with Option 2 flange rotation.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and OE correct short tailpipe.
- You will be asked to report which of the 2 flange rotation options is needed for your Y pipe.
- Y pipe may be NORS
-
This listing covers MY's 1954, 1955, and 1956 Dodge ½T's with the stock V8. Photo is correct to the listing.- Single exhaust system consists of cross-over pipe, Y pipe (AKA 2 pc. Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- This round muffler is stock with a body length of 27", stock inlet ID of 2", with tailspout and bracket welded in stock location.
-
Waldron's Exhaust reproduces this OE correct muffler hanger. This muffler hanger was used on 1970 and 1971 Ford Torino's / Fairlane's and Mercury Montego's. All engines. Both single and dual exhaust systems. Simply order the amount needed. Hangers generally will ship within 1 wk. -
1957 Thunderbirds stock with the 292ci V8 did not come with resonators so for this model the listing is correct to the stock system. This is a resonator delete option for 1956 models (regardless of the engine) and for 1957 stock with the 312ci. Photo depicts the stock dual exhaust system for 1957 Ford Thunderbirds with the stock 292ci which is stock without resonators.- System consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.