- System consists of the H pipe, LS/RS rear exhaust pipes, and LS/RS mufflers w/hanger bracket and tailspout welded into the proper position.
-
This listing covers MY's 1961, 1962, 1963, and 1964 Mercury Monterey's, Commuter's, Colony Park's, and Montclair's with the stock V8 292ci, 352ci, 390ci, 406ci, & 427ci. For convertibles go to see listing 453451. Photo depicts the stock dual exhaust system for 1963 Mercury Monterey's & Colony Park's with the stock 390ci V8, except for convertibles. -
This listing covers MY's 1963, 1964, and 1965 Mercury Monterey's, Commuter's, Colony Park's, and Montclair's with the stock V8. MY's 1963-64 using the 292ci or 352ci and in 1965, the 390ci & the 427ci.- MY's 1963-64: this single exhaust consists of the Y pipe, rear exhaust pipe w/resonator, and muffler w/hanger bracket & tailspout welded into the proper positions.
- MY 1965: this single exhaust consists of the Y pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe w/resonator.
- Y pipe may be NORS
-
This listing covers MY's 1961, 1962, 1963, 1964, and 1965 Mercury Monterey's, Commuter, Colony Park, and Montclair's with their stock V8. 1961-64 292ci, 352ci, and in 1965 the 390ci & 427ci. For MY's 1963 and 1964 this is a resonator eliminator option as these MY's were stock with a resonator. For the stock system see listing 453454. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- MY's 1961-64 this single exhaust system consists of the Y pipe, rear exhaust pipe and muffler w/hanger bracket and tailspout welded into the proper positions.
- MY 1965 this single exhaust system consists of the Y pipe, muffler, and tailpipe.
- Y pipe may be NORS
-
This listing covers MY's 1961, 1962, 1963, and 1964 Monterey's, Commuter's, Colony Park convertibles, and in 1964 the Marauder's with the stock V8 292ci, 352, 390, and introduced in 1963 the 406ci 427ci. For these MY's and any other body style; refer to listing 453452. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This dual exhaust system is stock with 4 mufflers; LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers w/hanger bracket & tailspout welded in proper positions.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers MY's 1958, 1959, and 1960 Mercury Monterey, Montclair and Parklane's stock with V8 and a dual exhaust. For 1958 Turnpike Cruiser's; this is a resonator delete option as 1958 Turnpike Cruiser's were stock with resonators, for the true stock system, refer to SKU 453465. Photo depicts the system for MY's 1959 & 1960 Monterey's, Montclair's, and Parklane's with the stock 383ci or 430ci engines.- MY 1958 consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
- MY's 1959 and 1960 consists of the LS/RS front exhaust pipes, cross-over pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. Gaskets are not required in these MY's.
-
This listing covers MY's 1955, 1956, 1957, 1958, 1959, and 1960 Mercury full size Monterey, Montclair, and Park Lane with the stock V8.
- MY's 1955-58 single exhaust consists of the Y pipe, muffler, and tailpipe. Y Pipe may be NORS.
- MY's 1959-60 single exhaust consists of the Y pipe (AKA front exhaust pipe), rear exhaust pipe, muffler, and tailpipe. Y Pipe may be NORS.
-
This listing covers 1957 Mercury Monterey, Montclair, and 1957 & 1958 Turnpike Cruiser stock with mufflers and resonators. Photo depicts the system for a 1957 Turnpike Cruiser (with the front tailpipes cut to reduce shipping costs).- Dual exhaust consists of the LS/RS exhaust pipe, LS/RS muffler, LS/RS front tailpipe, and LS/RS rear tailpipe with resonator. From the factory these tailpipes were 1 pc. but must be made in 2 pc. in reproduction due to the length.
-
This listing covers MY's 1955 and 1956 Mercury Monterey and Montclair's with the stock V8 and dual exhaust. Photo depicts the dual exhaust system for 1955-56 Monterey Woody Wagon's with the stock V8.- Systems consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes (long and expensive to ship).
-
This listing covers MY's 1949, 1950, 1951, 1953, and 1954 Mercury's with the stock flathead V8. Photo depicts the system for MY's 1949-51 Mercury's with the stock engine.- This single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Mercury's with the stock flathead V8. Photo shown is the stock single exhaust for a 1937 Ford without the heat exchanger (with TP cut to reduce shipping) & is posted so that you might see the quality of our craftsmanship and the type of bending.- For MY's 1941-48 this single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
- For MY's 1939-40: If your 1939-40 Mercury has the heat exchanger & you intend to reuse it; the system will consist of a cross-over pipe, exhaust pipe, muffler & tailpipe. If your 1939-40 doesn't have the heat exchanger or if it does have it but it is not reusable; the system will consist the 2 pc. Y pipe (AKA cross-over & Y pipe), muffler & tailpipe. You will be asked to report which setup you require in the check out process.
-
Photo is correct to the listing.- 1962 & 1963 Olds Jetfire Turbo 2nd Design single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, connector pipe (AKA over-axle pipe), single in/dual out transverse muffler, and LS/RS tailpipes.
- Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
-
This listing covers 1971, 1972, 1973, and 1974 Ventura's stock with a 6 cyl engine. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust consists of the front exhaust pipe, rear exhaust pipe, transverse muffler, and tailpipe.
-
This listing covers MY's 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 GMC ½ 1500, ¾T 2500, and 1T 3500's and starts after the catalytic converter. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust cat-back system consists of the rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1970, 1971 and 1972 GMC ½T 1500, ¾T 2500 and 1T 3500's with the stock V8.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1975, 1976, 1977, and 1978 GMC ½T 1500, ¾T 2500 and 1T 3500's stock with the 454ci V8. Photo depicts the stock dual exhaust for 1975 GMC 1500 ½T with the stock 454ci.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS tailpipes.
-
This listing covers MY's 1975, 1976, 1977, and 1978 GMC ½T 1500, ¾T 2500, and 1T 3500's with the stock 350ci or 400ci V8.
- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1968, 1969, 1970, 1971, and 1972 GMC's ½T 1500, ¾T 2500, 1T 3500 2WD & 4WD with the stock 396ci (1968-70) or 402ci (1971-72) V8 2WD & 4WD, EXCLUDING 115" WB. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS tailpipes.
-
This listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 GMC ½T 1500, ¾T 2500, and 1T 3500's with the stock 6 cyl, 2WD or 4WD. Photo depicts the stock single exhaust for 1967-68 GMC 2500 ¾T with 2WD stock with rear leaf springs, 127"WB and the V6 305ci.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- OE correct muffler hanger that is available in check is for MY's 1960-66. This muffler hanger is not OE correct for MY's 1967-79.
-
This listing covers MY's 1967, 1968, and 1969 GMC ½T 1500, ¾T 2500, and 1T 3500's with the stock V8.
- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1960, 1961, 1962, 1963, 1964, 1965, and 1966 GMC ½T 1000, ¾T 1500, and 1T 2500's with the stock V6 305ci with 2WD. Excludes 4WD's. Photo depicts the stock single exhaust for 1963 GMC with the stock 305ci V6 & 2WD (except 7' panel truck & Suburban which require a different tailpipe).- Single exhaust system consists of cross-over pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing is for 1955, 1956 and 1957 GMC's with the stock Pontiac V8. Photo depicts the system for 1956 GMC 100 ½T's with the stock V8 and 114"WB- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY 1955 will be asked to report the manifold ID during the check out process.
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 GMC 1½T's with the stock 6 cyl. Photo depicts the single exhaust system for 1955-58 GMC truck models 100-24, 150-24, 250-24 & PM250-24 with the stock 6 cyl- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Flange is not included with this exhaust pipe. Reuse original cast iron flange (if possible).
-
This listing covers model years 1954, 1955, 1956, 1957, 1958, and 1959 GMC ½T, ¾T, and 1T trucks with the stock 6 cyl.
- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. This system does not include the cast iron flange nor do we have the correct gasket available.
-
This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 GMC's with the stock 6 cyl 228ci or 248ci. Photo depicts the system for a 1955 GMC ½T with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. This exhaust pipe will not come with the cast iron flange. You will need to reuse your flange. Nor do we have a gasket available.
- The OE muffler hanger, available in checkout, is for MY's 1941-59. It is not OE correct for MY's 1939-40.
-
This listing covers MY's 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Chevy C10, K10, C20, and K20's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single cat-back exhaust system consists of the rear exhaust pipe, muffler, and tailpipe. If the pipes forward of the converter and/or the converter are needed, please contact us for availability and pricing.
-
This listing covers MY's 1975, 1976, 1977, and 1978 Chevy C10, K10, C20, K20, C30, K30 & Suburban's with the stock 350ci, 400ci, & 454ci. For 1975-78 Suburban's with the 454ci this is a resonator eliminator option since all were stock with resonators. Photo depicts the stock dual exhaust for 1975 Chevy C10's with the stock 454ci.
- Dual exhaust system for the 2 WD C Series consists of LS/RS exhaust pipes, LS/RS mufflers, & LS/RS tailpipes.
- Dual exhaust system for the 4 WD K Series & Suburban's consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers & LS/RS tailpipes.
-
This listing covers model years 1973, 1974, 1975, 1976, 1977, and 1978 Chevy C10, K10, C20, K20, C30's & Blazer's with the stock V8. Excludes K30's due to lack of patterns. Photo depicts the stock single exhaust for 1974 K5 Blazer's with 4WD & the stock 350ci.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1968, 1969, 1970, 1971, and 1972 Chevy K10 & K20's (excludes K30's) with the stock V8. For C Series; refer to listing 453324. Photos depicts the stock single exhaust for 1971-72 Chevy Blazer's with the stock 350ci V8. The single exhaust for the C series truck's consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. The single exhaust for the K series truck's consists of the cross over pipe, Y pipe, muffler, and tailpipe. -
This listing covers model years 1968, 1969 , 1970, 1971, and 1972 Chevy C10, C20, and C30's with the stock V8 396ci or 402ci engines and a wheel base of 127". If you have a 115" or 133"WB, we cannot help you out with the exhaust pipes (no patterns at this time). We can help you out with muffler and tailpipes (only). For pricing, please give us a call. Photo depicted fits 1969-72 Chevy C10/C20/C30 w/396ci w/127" with rear leaf springs.
- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. These exhaust pipes are 2½" and system then reduces to 2" at the tailpipes.
- During the check out process be sure to specify if truck has rear coil or leaf springs.
-
This listing covers MY's 1967, 1968, 1969, 1970, 1971, and 1972 Chevy C10, C20, and C30's with the stock small block V8 327ci, 307ci or 350ci engine and lets you convert your small block Chevy, with the stock 45° angle manifolds, to dual exhaust. Photo depicts the dual conversion system for 1971-72 Chevy C20's ¾T 2WD with the stock 350ci V8 and 127"WB with rear leaf springs.- Dual exhaust conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS glasspacks, and LS/RS tailpipes, along with the gaskets and clamps needed. Universal hangers are additional and can be added to your cart.
- Exhaust system is 2" throughout.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971,1972, 1973, 1974, and 1975 Scout's stock with either the 4 cyl or 6 cyl engine. This listing EXCLUDES 1970 Scouts with 232ci with manifold exit on the driver side. Photo depicts the system for Scouts after chassis FC60474 which has the muffler after the rear axle.- For Scouts up to chassis FC60474 and/or models with the muffler forward of the rear axle, this single exhaust system consists of an exhaust pipe, muffler, and tailpipe, with the tail pipe exiting out the passenger side.
- For Scouts after chassis FC60474 and/or models with the muffler after the rear axle, this single exhaust consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe, with the tail pipe exiting out the driver side.
- MY's 1961-70 do not require a gasket. MY's 1971-75 will require a gasket.
-
This listing covers model years 1960, 1961, 1962, 1963 with the stock 6 cyl., 1964, 1965, and 1966, stock with the 4 cyl. or the 6 cyl., 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 Chevy C10, K10, C20, K20, C30, and K30's stock with the 6 cyl engine. Photo depicts the stock single exhaust for 1962 Chevy C10's Series 14 2WD with the stock 6cyl .- System consists of the exhaust pipe, muffler & tailpipe.
- For MY's 1960-62, please specify whether your vehicle has a short side exit tailpipe or a longer rear exit tailpipe during the check out process.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 Chevy C10, C20, and C30's stock with the V8 and single exhaust. Excludes 1966-69 K Series with 4WD. For MY's 1968-72; you will need to report whether your truck is stock with or without rear leaf springs. Photo depicts the system for MY's 1957-59 Chevy ½T's with the stock V8.- System consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
Convert your 1957, 1958, or 1959 Chevy ½T, ¾T, or 1T with a small block 283ci V8 to dual's with Waldron's exclusive dual conversion kits that bolt onto your original manifolds that dump straight down with 3blt connection. Photo depicts the system for MY's 1957-59 Chevy ½T's with a long wheel base and the stock 283ci.- Dual conversion kit consists of gaskets, clamps, LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS custom-built glasspacks, and LS/RS tailpipes. The 4 universal hangers are not included but can be added to your cart.
- System is 2" throughout.
-
This listing cover model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Chevy trucks with the stock 6 cyl. Photo depicts the system for MY's 1950-55 (MY 1955 1st Series) Chevy 3100 with the stock 6 cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- Please specify the vehicle series through the checkout process.