- Single exhaust system contains front (Y) exhaust pipe, center exhaust pipe w/ long *resonator, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1965, 1966, and 1967 Cadillac Calais, Deville, Fleetwood, and Commercial Chassis with V8 and single exhausts. Photo depicts the system a 1966 Cadillac. The rear exhaust pipe varies between models. -
This listing covers model years 1961 & 1962 Buick Skylarks and Specials with a stock V8 and 4bbl carburetor. Refer to listing 568812 for the 2BBL set-up. Photo depicts the stock single exhaust for1962 Buick Skylarks with the stock 215ci V8 and 4bbl carburetor.- System consists of Y pipe, rear exhaust pipe, transverse muffler, and tailpipe. Some Y pipes are NORS only.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron's Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Riviera with V8 and allows you to delete the stock resonators. Photo depicts the system for a 1966 Buick Riviera with the stock V8 (with rear exhaust pipes cut to reduce shipping). MY's 1967-70 Riviera's take different exhaust pipes at 2¼"OD with flat spots but all other parts shown in the photo are correct.- 1966-70 Riviera exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS resonators w/tailpipes.
- 1971-74 Riviera exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators w/tailpipes.
-
Photo depicts the dual exhaust system with resonator eliminator pipes (vs with the stock resonators). For the stock system with resonators refer to SKU 568787.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators eliminator pipes, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
These chrome Pencil Tips are designed to be welded on and are approximately 9" in length. They are available in 1½" ID, 1¾" ID, 2" ID, 2¼" ID & 2½"ID for $15.00 (per). Available with 3" for $30.00 (per). Tips generally will ship within 1 wk. -
This listing allows you to order as many universal hangers as you may need. Let us know where on your system you will be using them and we will get you the best type for that position. Hangers generally ship out within 1 wk. -
Waldron's Exhaust reproduces these OEM style muffler hangers for MY's 1961, 1962, and 1963 Lincoln Continentals. Available for $127.00 for both LS/RS muffler (which are in the rear) hanger. Hangers generally will ship within 1 wk. -
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Select this option for a stock 5" or 6" round muffler with a body length less than 30". The checkout process will ask questions regarding your application and muffler will be built to those specifications.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Montego's, Cyclone's, Cyclone GT's with their respective stock V8; 390ci 302ci, 428CJ, 351ci, 429ci, 429CJ or 429SCJ. Photo depicts the stock dual exhaust for 1969 Mercury Montego's & Cyclones with the stock 390ci.- This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers model years 1968, 1969 , 1970, 1971, and 1972 Chevy C10, C20, and C30's with the stock V8 396ci or 402ci engines and a wheel base of 127". If you have a 115" or 133"WB, we cannot help you out with the exhaust pipes (no patterns at this time). We can help you out with muffler and tailpipes (only). For pricing, please give us a call. Photo depicted fits 1969-72 Chevy C10/C20/C30 w/396ci w/127" with rear leaf springs.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. These exhaust pipes are 2½" and system then reduces to 2" at the tailpipes.
- During the check out process be sure to specify if truck has rear coil or leaf springs.
-
This listing covers model years 1972, 1973, 1974, 1975, 1976, 1977 and 1978 D100, D200, W100, W200, and in 1978 W150. For MY's 1975-78 this is for exhaust systems without catalytic converters. Photo depicts the stock single exhaust for 1974 Dodge D200 ¾T with 2WD, 131"WB & the stock 360ci V8.- For MY's 1972-75 W100 & W200, 1972 D100 & D200, 1975 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- For MY's 1973-74 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
- For MY's 1976-78 D100, D100 Club Cab, D200 & 1978 D200 Crew Cab single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
- For MY's 1976-78 W100 & W200, 1976-77 W100 Club Cab & D200 Club Cab, and 1978 W150, W200 Club Camper, and D200 Club Camper single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.