- This single exhaust system consists of the crossover pipe, Y pipe, muffler, front tailpipe and rear tailpipe. The stock design takes the tailpipe through the rear cross-member.
-
This listing covers model years 1932, 1933, and 1934 Ford's with their respective stock flathead V8 with single exhaust. Photo depicts the single exhaust for 1933-34 Ford's with the stock flathead V8. -
This listing covers model years 1960, and 1961 Fairlane's (for 1962 and up refer to Ford Mid Size) 1960, 1961, 1962, 1963, and 1964 Galaxie, Starliner, 300's and Custom's with the stock V8 and dual exhaust, except Sunliner convertibles. For MY's 1960-61 Sunliner's, refer to listing 518711. For MY's 1962-64 Sunliner's, refer to listing 518716. Photo depicts the stock dual exhaust for 1963 Full Size with a 406ci or 427ci with long branch manifolds.- This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipe, and LS/RS mufflers with tailpipe.
-
This listing covers model years 1972, 1973, and 1974 Torino's and Ranchero's stock with a V8 and dual exhaust. 1972-74's stock with the 429ci were stock with a single exhaust only. Photo depicts the stock dual exhaust for 1972 Torino's (exc. Ranchero & SW) with the stock 351C V8- Dual exhaust system consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes. Chrome tips are not included. This system is a metal-to-metal connection at the manifolds and does not require gaskets.
-
This listing covers model years 1965, 1966, and 1967 Barracuda's with the stock 273ci and 4bbl carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo depicts the stock single exhaust for 1965-66 Barracuda's with the stock 273ci & 4bbl.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.
-
This listing covers 1972, 1973, & 1974 Commando's, Wagoneer's, J10's, J20's, CJ5 and CJ6's with the stock V8. Photo depicts a 1972-73 Jeep Commando with standard transmission.- Single exhaust system consists of a crossover pipe, Y pipe, muffler, and tailpipe.
- System is a metal-to-metal connection at the manifold. No gaskets are required at 2 pc. Y pipe.
- If you have a 1972-73 CJ5 or CJ6 you will need to report the desired tailpipe diameter. These models were stock with either 1¾" or 2" OD tailpipe.
-
This listing covers model years 1973, 1974, 1975, 1976, 1977, and 1978 Jeep Truck, Wagoneer, and Cherokee's with the stock V8. Photo depicts the stock single exhaust for 1978 Jeep Cherokee's & Wagoneer's with the stock V8 (customer opted to have tailpipe cut to reduce the shipping cost).- For MY's 1973-75 this single exhaust system consists of LS exhaust pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS.
- For MY's 1976-78 this single exhaust system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1948, 1949, 1950, 1951, and 1952 Ford ½T, ¾T & 1T trucks with the stock flathead V8. Convert your flathead Ford to dual's with Waldron's exclusive Dual Conversion kits! Complete kits bolt on to the original manifolds. Photo depicts the dual conversion for 1948-52 Ford F1 with the stock V8- Dual conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS glasspacks, LS/RS tailpipes, gaskets, and clamps.
- Period specific hangers are N/A. Universal hangers only. Hangers are not included in the kit but may be added to your cart.
- Exhaust pipes start out at 1&5/8" OD and increase to 2"OD immediately after the flange. Tail pipes are 1¾"OD.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process.
-
This listing cover model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Chevy trucks with the stock 6 cyl. Photo depicts the system for MY's 1950-55 (MY 1955 1st Series) Chevy 3100 with the stock 6 cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- Please specify the vehicle series through the checkout process.
-
This listing covers model years 1957 and 1958 full size Buick's with dual exhaust. Photo depicts the system for a 1958 Buick Roadmaster.- This system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with short tailpipes. This system is a metal-to-metal connection at the manifold and no gaskets are required.
-
This listing covers model years 1952, 1953, 1954, 1955, and 1956 Cadillac's (all series and all body styles) with stock dual exhaust with 4 mufflers. Photo depicts the system for 1952-53 Cadillac coupes and convertibles.- Dual exhaust system includes - LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, LS/RS tailpipes. Tailpipes will fit into the factory tips located in the bumper. These tips are not part of the package.
- For Series 75 and Commercial Chassis, this will not be a direct fit. We do not have all the patterns needed (in these model years) for Commercial Chassis or Series 75. If you have a 1952-56 Series 75 or Commercial Chassis we will supply you with a couple pieces of straight tubing. You will then need to modify the system to fit.
- If you have original pipes still on your 1952-56 Cadillac Series 75 or Commercial Chassis, please give us a call at 800-503-9428.
-
This listing covers model years 1955, 1956, 1957, 1958, and 1959 Ford V8's stock with a dual exhaust. Excludes 1957-59 Convertibles & Retractable Hard Tops, for these systems refer to SKU: 518710. Photo depicts the system for MY's 1955-56 Ford Sunliner convertibles with the stock V8.- For 1955-56 MY's this dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1957 S.W.'s, Ranchero's & Sedan Deliveries this dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. For all other body styles, this dual exhaust will consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
- For 1958 & 1959 MY's this dual exhaust will consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
-
This listing covers model years 1958, 1959, 1960, 1961, 1962, and 1963 Thunderbird's with the stock V8 and dual exhaust with 2 mufflers. This listing is the stock set up for 1962 Thunderbird's with a 6 bbl carburetor. For the stock set up 1962 Thunderbird's stock with a 4 bbl carburetor and for MY 1961 refer to 518725. If you have a 1961 and want to eliminate the resonator, this is the listing to be used. Photo depicts the dual exhaust system for 1963 Ford Thunderbirds with the stock V8- Dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, and LS/RS mufflers with tailpipes.
- MY 1963 will be asked to report the type of gasket needed (flat or donut) in the check out process.