- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
- The system for the Non HO or RA engines starts out at 2"OD, increases to 2¼"OD at the connector pipes, then decreases back to 2"OD.
- The system exhaust pipes for HO & RA engines are 2¼"OD flared to 2½"OD at the manifolds, connector pipes are 2¼"OD and then reduces to 2"OD on the tailpipes.
- Regarding HO & RA setups: We are no longer able of offer the stock cast iron flanges. The exhaust pipes will come with universal flanges. If you have the stock cast iron flanges, keep them and reuse them.
-
This listing covers model years 1967, 1968, and 1969 Firebird's with the stock V8 and stock dual exhaust. Photos depicts the exhaust system for MY's 1967-68 Firebirds stock V8 (except 400HO & Ram Air). -
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 Signet, Valiant, and Barracuda's with the stock V8 273ci or 318ci and single exhaust. Photo depicts the stock single exhaust for 1964-66 Plymouth Mid Size models with the stock 273ci or 318ci with a 2bbl carburetor.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1964-69 do NOT require gaskets at the manifold.
- MY's 1970-71 DO require gaskets at the manifold.
-
This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, and 1952 Plymouth's Deluxe, Concord, Cambridge, Belvedere, Savoy and Cranbrook's with the stock 6 cyl engine. Photo depicts the system for MY's 1949-52 Plymouths with the stock 6 cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
For Packard MY's 1955 and 1956 Patrician, Caribbean's, Executive, 400, Clipper Super & Custom's, this is a resonator eliminator option (for the stock system refer to listing 454498). Photo depicts the dual system for 1956 Executive, Clipper Super, & Custom's with a 352ci, torsion bar suspension and the stock resonator eliminated.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS muffler assembly, and LS/RS tailpipes.
- Our patterns for MY 1956 Clipper Super's, Custom's & Executive's are for models with torsion bar suspension.
- Shipping full length is the only option under this listing.
-
This listing covers model years 1954, 1955, and 1956 Olds 88 and 98 with the stock V8. Photo depicts the system for MY 1956 Olds Super 88.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe.
- Regarding 1954 & 1955 models; if ordering the system in T409 SS, the cross-over pipe will be built in 2 pcs. If ordering an aluminized steel system, the cross-over pipe will be NORS.
-
This listing covers model years 1949, 1950, 1951, 1952, and 1953 Olds 88 & 98's stock with the V8. Photos depicts the system for MY's 1949-50 Olds 88's with the stock V8.- Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe. This system requires 3 gaskets. Waldron's can help you out with a flat gasket but we do not have the Oldsmobile style gasket available.
- MY's 1952 & 1953 will need to report whether the vehicle was stock with or without power steering in the check out process.
-
For model years 1970, 1971, 1972, 1973, and 1974 Lincoln's with the stock V8 and single exhaust. The Mark IV begins in 1972. Excludes the Mark III which were stock with a dual exhaust. Photos depicts the system for 1972-73 Mark IV's with the stock V8.- This single exhaust consists of the Y pipe, front muffler, connector pipe, and rear muffler with tailpipe.
- The Lincoln Continentals require a different system from the Lincoln Mark IV so please, be sure to report your model correctly.
- For MY 1973, please specify the build date during the check out process (before or after 2-15-73).
-
This listing covers MY's 1958, 1959, and 1960 Lincoln Continental Premiere's & Capri's with the stock V8. Photo depicts the dual exhaust for all models in 1958 with the stock V8 430ci.- Dual exhaust system consists of the cross-over pipe, LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailspouts.
-
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Mustangs with a V8 and allows owners of A Code's & some K Code's to update their Mustang's to the unique sound of the Arvinode dual exhaust. For 1965-66 K Code's this is the stock set up. This concours correct Arvinode system has the chamber tube that runs along the top of the muffler/resonator and gives you the true original Arvinode sound. Photo is correct to the listing.- The Concours Arvinode dual exhaust system starts behind the stock H pipe and includes the LS/RS connector (AKA rear exhaust) pipes, LS/RS wave-tuned front mufflers with rectangular external tubes, LS/RS over-axle pipes, LS/RS resonators with turndowns or GT exit.
- These parts were welded into LS and RS assembly's from the factory and connected with clamps to the outlet end of the H pipe.
- If the H pipe is needed, you may add to your cart in the check out process.
- Let us know if you need the GT exit or turndowns in the check out process.
- If you are adding the Arvinode hanger kit to your order and your Mustang is not a stock K Code and was not stock with this Arvinode system, you will need to contact National Parts Depot and order their part 5B236-1A in order to utilize the hanger kit.
-
This listing covers MY's 1956 with either the 292ci or the 312vi V8 and 1957 Ford Thunderbirds with the 312ci V8. The 292ci did not come stock with resonators. Refer to listing 518899 for a '57 T-bird with a 292ci or if you want to delete the resonator. Photos depicts the exhaust pipes and mufflers for 1956 and 1957 Thunderbirds, the front and rear tailpipes vary depending on engine and transmission.- This dual exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS tailpipes.