Shop

  • This cat-back listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, and 1992 Firebird's with either a 4, 6, or 8 cyl engine and stock with 2 tailpipes. Photo depicts the cat-back single exhaust system for 1990-92 Firebirds with the stock 189T or 191ci 6cyl. All parts shown are NORS . 
    • For MY's 1983-84 with a 6 cyl & MY's 1983-86 with a 4 cyl; single cat-back system consists of the rear exhaust pipe, single in/dual out same side transverse muffler, and tailpipes.
    • For all 8 cyls & all other MY's for the 6 & 4 cyl; single cat-back system consists of the rear exhaust pipe, single in/dual out opposing sides transverse muffler, and LS/RS tailpipes.
    • Some or all parts may be NORS
  • This listing covers model years 1926, 1927, 1928, 1929, 1930, 1931, and 1932 Reo's with the stock 6  or 8 cyl. Photo depicts the system for a 1929 Flying Cloud with the stock 6 cyl. 
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. We provide a universal flange but if you have the original cast iron flange it should be reused.
  • This listing covers model years 1975, 1976, 1977 Ventura, and 1977, 1978, 1979 Phoenix and Sunbird's with either the 4, 6, or 8 cyl engine and begins behind the catalytic converter. If pipe forward of converter and/or converter are needed, please contact us for availability and pricing.
    • Single cat back system consists of the rear exhaust pipe, muffler and tailpipe. Depending on model, model year & engine some systems have the muffler sitting transverse while others are in line with the pipes. All Ventura's have the transverse muffler.
  • This listing covers model years 1975, 1976, and 1977 Ventura, and 1978, 1979 Phoenix, and Sunbird's with the stock 4, 6, or 8 cyl engine and starts behind the converter. If pipe forward of converter and/or converter are needed, please contact us for availability and pricing. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Ventura & Phoenix single cat-back system consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
    • Sunbird single cat-back system consists of the rear exhaust pipe, single in/dual out inline muffler, and 2 tailpipes.
  • This listing covers 1971, 1972, 1973, and 1974 Ventura's stock with a 6 cyl engine. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust consists of the front exhaust pipe, rear exhaust pipe, transverse muffler, and tailpipe.
     
  • This listing covers model years 1971, 1972, 1973, and 1974 Ventura's with the stock V8 and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • MY's 1971-72 the exhaust system consists of the Y pipe, rear exhaust pipe, transverse muffler, and tailpipe.
    • MY's 1973-74 the exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, transverse muffler, and tailpipe.
  • This listing covers model years 1973 and 1974 Ventura's stock with the V8 and dual exhaust. Photo depicts the stock dual exhaust for 1974 Ventura GTO's with the stock V8 and stock split chrome tips. The 1973 Ventura's take the same front and rear exhaust pipes as 1974 models, the difference between the 2 model years comes at the transverse muffler and tailpipes. 
    • Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
    • If the chrome split tips are desired (stock for a 1974 Ventura GTO), you may add them to your cart below.
  • This listing covers model years 1920, 1921, 1924, 1925, 1926,1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Erskine, Commander, Dictator, model 54, model 55, model 56, Champion, Land Cruiser, Hawk, and Lark's with the stock 6 cyl. For MY's 1922-23 we have the exhaust pipe pattern (only). If interested in pricing, please give us a call.  Photo depicts the stock single exhaust for 1959-60 Studebaker Lark Convertibles with the stock 170ci 6cyl. 
    • For MY's 1920-58 this single exhaust consists of exhaust pipe, muffler, and tailpipe.
    • For MY's 1959-66 All Models Except Convertibles & 1963-66 Station Wagon's with a sliding roof this single exhaust consist of exhaust pipe, muffler, and tailpipe.
    • For MY's 1959-66 Convertibles & 1963-66 Station Wagons with a Sliding Roof this single exhaust consists of the exhaust pipe, muffler, front tailpipe & rear tailpipe. Do NOT select the cut option on this systems.
    • 1963-66 Station Wagons will be asked to report whether your Station Wagon was or was not stock with the sliding roof in the check out process.
  • This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, and 1946 President, Commander, and Dictator with the stock straight 8 and single exhaust. Photo depicts the stock single exhaust for 1938 Lincoln Presidents with the stock Straight 8
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Commander, President, Golden Hawk, Hawk, and Lark's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for 1964 Commander Lark Station Wagon w/spin-on oil filter, w/o a sliding roof and the stock 289ci V8.  Single exhaust consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and from here it varies, some models have a tailpipe while others have a front and a rear tailpipe.
    • 1958 Sedans will need to report whether it is a “long wheel base sedan” or “except long wheel base sedan”.
    • 1963 & 1964 Larks will need to report which type of filter is stock; spin-on filter or cartridge filter.
    • 1964-66 Lark Station Wagons will need to report whether your SW has a sliding roof or not.
     
  • This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Commander, President, Golden Hawk, Silver Hawk, Lark, Hawk, and President Classic with the stock V8 and dual exhaust. Photo depicts the system for a 1962 Hawk hardtop stock with a dual exhaust. 
    • For MY's 1959-64 Lark convertibles and 1963-64 Station Wagon's this dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes, and LS/RS rear tailpipes.
    • For all other models this dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
    • 1958 Sedans will need to report whether it is a "long wheel base sedan" or "except long wheel base sedan".
    • 1963 & 1964 Larks will need to report which type of filter is stock; spin-on filter or cartridge filter.
    • 1964 Lark Station Wagons will need to report whether your SW has a sliding roof or not.
     
  • This listing covers model years 1932, 1933, 1934, 1935, 1936, 1937, and 1938 all Terraplane's with the stock 6 cyl. Photo depicts system for 1934-35 Terraplane with the tailpipe cut (for shipping savings).
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
    • Original cast iron flange is NA. Exhaust pipe will come with universal 2blt flange. If you have the original cast iron flange, keep it and reuse it. 
  • This listing covers 1927, 1928, 1929, 1930, 1931, 1932, and 1933 Willys-Knight with the stock 6 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
     
  • This listing covers model years 1925, 1926, 1927, 1928, 1929, 1930, and 1931 Whippet's 93, 96, 93A, 98, 96A,  and 98A's with the stock 4 cyl or the stock 6 cyl engine. Photo depicts the system for a 1930 Whippet 96A.
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. During the check out process you will need to report the ID of the manifold.
  • This listing covers model years 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, and 1939 Willys models 98B, 97, 98D, 8-80D, 90, 77, 37, and 38 with the stock 4 cyl or the stock 6 cyl. Photo depicts the stock single exhaust for 1930 Willys 98B. 
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956,1957, 1958, 1959, 1960, 1961, and 1962 Willys models 6-33, 6-73, 4-63, 4-73, 675, 675A, 685, 685A, Ace Deluxe, Eagle Deluxe, Eagle Custom, 475, VJ2, VJ3 Jeepster, 4x4-63, 4x4-73, 4x4-75, Aero-Lark, 6-226 Deluxe, Custom and Bermuda's stock with either the stock 4 cyl or the stock 6 cyl.
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
     
  • This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 models CJ-2, CJ-2A, 2WD Trk, 4WD Trk, CJ-3A, CJ-3B, DJ-3A, DJ-3A Dispatcher, 4x4-63, 4x4-73, 4x4-75 SW, F134, 4x2-581 Maverick, C101 Jeepster, CJ-5 Universal Jeep, CJ-6 Universal Jeep, FC150, CJ-3B Universal Jeep, DJ-5, and DJ-6 Universal Jeep's with the stock 4 cylinder engine. Photo depicts the stock single exhaust system for 1950-54 Willy's Jeep PU with the stock 4 cyl. 
    • For some MY's this single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe while other systems consists of an exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, and 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1976, 1974, and 1975 Willys/Jeeps models 2WD Trk, 4WD Trk, FC170, J-262, J-264, J-362, and J-364 Gladiator. Photo depicts the stock single exhaust for 1957-64 Willys Jeep FC170's (forward control) with the stock in-line 6cyl engine. 
    • MY's 1963-65 single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
    • All other MY's consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 CJ-5, CJ-5A, and D-J5 with the stock Dauntless V6 225ci. The photo depicts the exhaust system for 1966-71 CJ5, CJ5A and DJ5 with gas tank forward of the rear axle.
    • 1966-Early 1971 with the gas tank sitting forward of the rear axle, this single exhaust system consists of a Y pipe, rear exhaust pipe, transverse muffler and tailpipe exiting on the PS.
    • Later 1971 models with the gas tank sitting aft of the rear axle; this single exhaust pipe consists of a cross-over pipe, Y pipe, inline muffler and tailpipe exiting on the DS.
    • You will need to report which system is needed in the check out process.
     
  • This listing covers model years 1967, 1968, 1969, 1970, 1971, and 1972 Jeepster Commando and C101 Jeepster's with the stock Dauntless V6 225ci engine. Photo depicts the single exhaust for 1967-72  Jeepster Commando C101 with after-market Saginaw steering and automatic transmission.
    • Single exhaust consists of the LS/RS exhaust pipes, Y pipe, muffler, and tailpipe.
    • You will be asked to report the type of steering on your Jeepster; original Ross steering or after-market Saginaw steering?
     
  • This listing covers 1972, 1973, & 1974 Commando's, Wagoneer's, J10's, J20's, CJ5 and CJ6's with the stock V8. Photo depicts a 1972-73 Jeep Commando with standard transmission.
    • Single exhaust system consists of a crossover pipe, Y pipe, muffler, and tailpipe.
    • System is a metal-to-metal connection at the manifold. No gaskets are required at 2 pc. Y pipe.
    • If you have a 1972-73 CJ5 or CJ6 you will need to report the desired tailpipe diameter. These models were stock with either 1¾" or 2" OD tailpipe.
  • This listing model years 1966, 1967, 1968, 1969, 1970, 1971, and 1972 models J-262, J-264, J-362, J-364 Gladiator's, J-162, J-164 Station Wagon & Panel Delivery with the stock V8 304ci, 350ci, or 360ci. Photo depicts the system for a 1970 Jeep Wagoneer. 
    • Single exhaust system consists of LS crossover pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS. 
  • This listing covers model years 1965,1966, 1967, 1968, 1969, 1970, 1971 and 1972 models J-162, J-164, J-262, J-264, J-362, and J-364 Gladiator's stock with the 327ci V8. Photo depicts the stock single exhaust for 1966-72 Jeep Wagoneer & Gladiators with the stock 327ci V8 except the SW & Sedan Deliveries which are stock with a longer tailpipe. 
    • Single exhaust system consists of a LS exhaust pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1973, 1974, 1975, 1976, 1977, and 1978 Jeep Truck, Wagoneer, and Cherokee's with the stock V8. Photo depicts the stock single exhaust for 1978 Jeep Cherokee's & Wagoneer's with the stock V8 (customer opted to have tailpipe cut to reduce the shipping cost). 
    • For MY's 1973-75 this single exhaust system consists of LS exhaust pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS.
    • For MY's 1976-78 this single exhaust system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
     
  • This listing covers model years 1973, 1974, 1975, 1976, 1977, and 1978 Wagoneer, Trucks, and Cherokee's stock with either a 232ci or 258ci 6 cyl engine. Photo depicts the system for a 1974 Jeep J10 w/119"WB (tailpipes vary between Cherokee, 119"WB & 131"WB). 
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers MY's 1972-73 CJ5, CJ6, DJ5, & DJ6, 1974-75 CJ5 & CJ6, 1976-78 CJ5 & CJ7. Photo depicts the stock single exhaust for 1972-73 CJ5's and DJ5's with the stock 232ci 6cyl. and 2" tailpipe.
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
    • MY''s 1972-73 will need to tell us what size tailpipe your CJ was stock with in the check out process.
    • MY 1975 will need to be specific about 3 or 4 speed transmission in the check out process.
    • MY 1978 will need to report with or without Power Take Off in the check out process
     
  • This listing covers model years 1914, 1915, 1916, 1917, 1918, 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, and 1938 Dodge ½T, ¾T, and 1T trucks with either the stock 4 cyl or 6 cyl. Photo depicts the stock single exhaust for a 1935 Dodge ½T KC or HC with the stock 6cyl. 
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
    If interested, please give us a call at 800-503-9428 so that we can be certain that we have all the pattern pipes needed to make your system.
  • This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955 and 1956 Dodge ½T, ¾T and 1T trucks with the stock 6 cyl. Photo depicts the system for a 1939 Dodge ½T with the stock 6 cyl.
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 D100, D200 or D300 with the stock 6 cyl engine and 2WD. This listing excludes Dodge trucks with 4WD. Photo depicts the stock single exhaust for 1970-71 Dodge D100's with the stock Slant 6 225ci. 
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1961, 1962, and 1963 Dodge W100, W200, W300 and 1964 W100 and W200. Excludes 1964 W300. Photo depicts a system for 1961-64 Dodge W100, W200 and W300 with 4WD except for 1964 W300.
    • This single exhaust system consists of an exhaust pipe, muffler and tailpipe.
  • This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, and 1969 Dodge D100, W100, D200, W200, D300, & W300's, 1970 & 1971 D100, D200, D300 & W300's stock with the V8 except the 383ci as the Y pipe for the 383ci has never been reproduced for this MY's. Give us a call to see what we can do for you at 800-503-9428.  Photo depicts the stock single exhaust for 1967-68 D100 ½T's & D200 ¾T's Regular Cab with 127" WB and the stock 318ci V8
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
    • For 1961-64 models, this system is for conventional cabs only.
    • 1965-68 models will be asked to report the serial number. We will need to know if it falls before or after SN 166800. The difference being that early models require flat gaskets at the manifold while the later models are a metal-to-metal connection at the manifold.
    • 1969-71 models will be asked to report whether the truck is stock with or without a cowl.
     
  • This listing covers model years 1972 D100 (excludes 1973 W100; no patterns available), 1973 and 1974 Dodge D100 & W100's, 1975, 1976, and 1977 Dodge D100 & W100's, and 1978 D100, W100, D150 & W150's stock without a catalytic converter and the 6 cyl engine.
    • MY's 1972-74 D100's this single exhaust consists of a front exhaust pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
    • MY 1973 W100 single exhaust consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. MY 1975 both D100 & W100 system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
    • MY's 1976-77 both D100 & W100 systems consists of the front exhaust pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
    • MY 1978 D100 & D150 system consists of a front exhaust pipe, center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe while the W100 & W150 system consists of a front exhaust pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
       
  • This listing covers model years 1972, 1973, 1974, 1975, 1976, 1977 and 1978 D100, D200, W100, W200, and in 1978 W150. For MY's 1975-78 this is for exhaust systems without catalytic converters. Photo depicts the stock single exhaust for 1974 Dodge D200 ¾T with 2WD, 131"WB & the stock 360ci V8. 
    • For MY's 1972-75 W100 & W200, 1972 D100 & D200, 1975 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
    • For MY's 1973-74 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
    •  For MY's 1976-78 D100, D100 Club Cab, D200 & 1978 D200 Crew Cab single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
    • For MY's 1976-78 W100 & W200, 1976-77 W100 Club Cab & D200 Club Cab, and 1978 W150, W200 Club Camper, and D200 Club Camper single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
  • This listing covers model years 1972, 1973, 1974, 1975, 1976, and 1977 D300 and W300's with the stock V8. In MY's 1975-77, this is for trucks that were stock without a catalytic converter.
    • Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
     
  • 1909-27 Ford Model T

    $271.00$475.00
    This listing covers model years 1909, 1910, 1911, 1912, 1913, 1914, 1915, 1916, 1917, 1918, 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, and 1927 Model T's. Photo is correct to the listing.
    • Single exhaust consists of the exhaust pipe and muffler.
    • Exhaust pipe does not take a flange, it has a flare that uses a special nut which is not provided.  
  • Listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T Trucks with the stock flathead V8. Convert your flathead Ford to dual exhaust with Waldron's exclusive Dual Conversion kits! Complete kit bolts on to the stock manifolds. Not available for 1933-34, 1942-47 or 1953 MY's.
    • Dual conversion kit consists of  the exhaust pipes, custom-built glasspacks, tailpipes, blocker plate, gaskets and clamps. Gaskets & steel clamps are included. After 1949, the RS exhaust requires blocking plate which will be included in the system. Universal hangers can be added to the cart, if needed. Period specific hangers are N/A.
    • The system goes through existing holes in the crossmembers. LH exhaust pipe starts at 1 ½”OD and opens to 2”OD  at the glasspack inlet. RH exhaust pipe 2” OD throughout. Tailpipes are either 1 5/8” or 1 ¾” depending on the material selected & MY.
    • If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. Additional cost of $115.00 for aluminized steel or $230.00 for T409 SS. 
    Lead time on this system with glasspacks generally runs 5-6 wks., with mufflers the lead time will be as posted above. 

Title

Go to Top