- MY's 1960-65: system consists of the front exhaust pipe, rear exhaust pipe, and muffler w/tailspout.
- MY 1966: system consists of the front exhaust pipe, rear exhaust pipe (turns in board), and transverse muffler w/tailspout.
- MY's 1967 & 1969-70: system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY 1968: system consists of the front exhaust pipe, rear exhaust pipe w/muffler, and tailpipe.
- MY's 1971-74: system consists of the front exhaust pipe, center exhaust pipe, rear exhaust pipe, and muffler w/tailspout.
-
This listing covers MY's 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Meteor (MY's 1962-63 only) & Comet's, including the Cyclone, Caliente and GT's, with their respective stock 144ci, 170ci, 200ci, and in 1969, the 250ci 6 cyl engine. Photo depicts the system for MY's 1963-65 Comet's with the stock 200ci.
-
This listing covers MY's 1962, 1963 Mercury Meteor's & 1963, 1964, & 1965 Comet (including Cyclone and Caliente's) with their respective stock V8; 221ci, 260ci, or 289ci. 1965 . Photo depicts the system for 1965 Comet's.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailspout. Y pipe may be NORS.
- Comet's with the 4bbl carburetor were stock from the factory with a resonator built into the tailpipe. Waldron's does not have the needed pattern for the 4bbl set-up, so this listing is a resonator delete system.
-
This listing covers MY's 1966, 1967, 1968, 1969, and 1970 Mercury Comets with their respective stock V8: 390ci, 427ci, 302ci, 428CJ, 351ci, 429ci, 429CJ & 429SCJ. For MY 1967 this is a resonator eliminator option as this model year was stock with a transverse resonator between tailpipes. For that listing, refer to 453471. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing is for folks who want to keep their 1967 Comet, stock with a 390ci or 427ci V8, true to stock with the resonator. For a resonator eliminator option, refer to listing 453470. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS tailpipes, and transverse muffler (sits between tailpipes).
-
This listing covers MY's 1967, 1968, 1969, and 1970 Mercury Comet's/Cyclone's with their respective stock V8: 390ci, 289ci & 302ci engines. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1973, 1974, and 1975 Mercury Comet's and Monarch's (MY 1975) with the stock 6 cyl engine. For MY 1975, this is for the Comet's that were stock without a converter.
- MY's 1973-74: Single exhaust consists of the front exhaust pipe, center exhaust pipe w/resonator, rear exhaust pipe, and muffler w/tailspout.
- MY 1975: Single exhaust consists of the front exhaust pipe, rear exhaust pipe, resonator, connector pipe, and muffler w/tailspout.
-
This listing covers MY's 1975, 1976, and 1977 Mercury Comet's, Comet GT's, Cyclone's, and Monarchs with a 6 cyl. or V8 and starts behind the catalytic converter. MY 1977 will need to report converter length in the check out process. Photo depicts the stock single cat-back system for 1976 Comet 4dr's with the stock 6cyl (2dr models require a different rear exhaust pipe).
- Starting behind the converter, this system consists the rear exhaust pipe, front muffler, connector pipe, and rear muffler w/tailspout.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Cougar's & GT's with their respective stock V8: 302ci, 390ci, 427ci, 428ci, 351ci, 429ci, or 460ci. Photo depicts the system for a 1969 Cougar with the stock 351W.
- For MY's 1968-73: This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
- For MY 1974: This dual exhaust consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Cougar's with their respective stock V8: 289ci, 302ci or 351ci. Photo depicts the stock single exhaust for 1969 & 1970 Cougar's with the stock 351ci.
- For MY's 1968-73: This single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
- For MY 1974: This single exhaust consists of the Y pipe, muffler, and tailpipe.
-
This listing covers MY's 1975 and 1976 (last year for a stock dual system from the factory) Mercury Cougar's with their respective stock V8; 460ci, 351ci or 400ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This dual exhaust system starts behind the stock converter(s) and consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS. You will need to report the catalytic converter set-up in the check out process.
-
This listing covers MY's 1975, 1976, 1977, 1978, & 1979 Mercury Cougars with their respective stock V8; 351ci, 400ci, or 302ci.
- This single exhaust system starts behind the converter(s) and consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS. For MY's 1975-76 we will need to know if you have 1 converter (on the DS) or 2 converters. For MY's 1977-79 there are converters on both sides (only). 1978 will need to report shell length of the stock converter.
-
This listing is for 1980 Cougar's with their respective stock V8 255ci or 302ci V8 and a single exhaust stock with mufflers. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This single exhaust starts behind the converter and consists of the rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailspout.
-
This listing covers MY's 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, & 1988 Mercury Cougar's & Cougar XR-7's with their respective stock 4 cyl. 140ci, 6 cyl 200ci or 230ci or 8 cyl 255ci or 302ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This single exhaust starts behind the converter and consists of the rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1968, 1969, 1970, and 1971 Mercury Montego's stock with a 200ci or 250ci 6 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1968, 1969, 1970, and 1971 Mercury Montego's stock with their respective V8: 390ci, 302ci, 289ci or 351ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Montego's, Cyclone's, Cyclone GT's with their respective stock V8; 390ci 302ci, 428CJ, 351ci, 429ci, 429CJ or 429SCJ. Photo depicts the stock dual exhaust for 1969 Mercury Montego's & Cyclones with the stock 390ci.
- This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing covers MY's 1972 (except 1972 SW's built before 3-15-72), 1973, and 1974 Mercury Montego's with the stock 6 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- For 1972 Montego's Station Wagon's stock w/6 cyl and built after 3-15-1972: single exhaust consists of the exhaust pipe, muffler, front tailpipe (turns inboard), single in/out transverse muffler, and tailpipe (exits out driver side). For 1972 SW's built before 3-15-1972 refer to listing 454480.
- For all other models in 1972 and all models in 1973-74: single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This list EXCLUDES 1972 models with a 429ci V8 as those were stock with 2 mufflers, 1972 station wagons built before 3-15-72, 1973 SW's w/400ci & built before 1-19-73, 351ci & built before 2-5-73, and the 429ci built before 2-22-73 . For these 2 muffler systems, refer to listing 454493. This listing covers MY's 1972, 1973, and 1974 Mercury Montego's, INCLUDING station wagons built that were stock with 1 muffler, with their respective stock V8; 429ci, 400ci, 302ci, and 351ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- For Station Wagon's stock with 1 muffler; this single exhaust system consists of the Y pipe, muffler, front tailpipe (turns outboard), and rear tailpipe with DS exit. Y pipe may be NORS.
- For all other models; this single exhaust consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1972 & 1973 Montego Villager station wagon's (including all 1972 models with a 429ci) stock with a 2 muffler system and their respective V8: 429ci, 400ci, 302ci, and 351ci.
- 1972 all models except the SW w/429ci; single exhaust system consists of the Y pipe, muffler, and tailpipe w/resonator. Y pipe may be NORS.
- 1972 SW's built before 3-15-72; single exhaust consists of the Y pipe, front muffler, connector pipe, transverse muffler, and tailpipe w/DS exit. Y pipe may be NORS.
- 1973 SW's w/400ci & built before 1-19-73, 351ci & built before 2-25-73, 429ci & built before 2-22-73: single exhaust consists of the Y pipe, front muffler, connector pipe, transverse muffler, and tailpipe w/DS exit. Y pipe may be NORS.
-
This listing covers MY's 1975 & 1976 Mercury Montego and Montego Villager SW with the stock V8 351ci or 400ci. System starts behind the catalytic converter(s). Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This single exhaust system starts behind the converter(s) and consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS. Report the converter set-up in the check out process.
-
This listing is for 1975 and 1976 Mercury Montego and Montego Villager SW's with the stock 460ci V8 and stock with dual's. Some models were stock with a single catalytic converter on the driver side while other had 2 converters. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. Dual exhaust system starts behind the converter(s) and consists of the NORS H pipe, LS/RS mufflers, and LS/RS tailpipes. Report your converter set-up in the check out process.
-
This listing covers MY's Ford LTD's (full size) stock with a dual exhaust and their respective 429ci or 460ci V8 & starts after the H pipe (which is not included). Photo depicts the H Pipe-Back dual exhaust for 1971 Ford Full Size models with the 429ci.
- We can help you out with a set of mufflers, LS/RS front tailpipe, and LS/RS rear tailpipe.
- No aftermarket company ever reproduced the H pipes for these MY's and so we are unable to offer the complete system. If you have an original H pipe and would like to have us use it to reproduce your system, please contact us at 1-800-503-9428.
-
This listing covers MY 1970 (with a 429ci) 1970 & 1972 full size Mercury with the stock 429ci and 1974 full size Mercury's with the stock 460ci. Mercury did not offer dual exhaust systems on any full size cars in 1971 or 1973. No aftermarket company ever reproduced the H pipes for these MY's and so we are unable to offer the complete system. If you have an original H pipe and would like to have us use it to reproduce your system, please contact us.
- We can help you out with the LS/RS mufflers, LS/RS front tailpipes, and LS/RS rear tailpipes.
-
This listing is for MY 1979 Mustangs with their respective stock 6 cyl or 8 cyl engines; 171ci, 200ci, or 302ci.
- This single cat-back exhaust starts behind the converter and consists of the rear exhaust pipe, front muffler, connector pipe, and rear muffler w/tailspout. If the front Y pipe and/or converter are need, please give us a call for pricing and availability.
-
This listing is for MY's 1964 & 1965 F85's that were stock with the Buick 225ci V6. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. MY 1965 Y pipe may be NORS.
-
This listing covers MY's 1957, 1958, 1959, and 1960 Dodge D100, D200, D300 or W300 stock with the stock 318ci V8. Photo is correct to the listing for all 1957-60 D100, D200, D300 & W300 with the stock 318ci and Y pipe with Option 2 flange rotation.
- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and OE correct short tailpipe.
- You will be asked to report which of the 2 flange rotation options is needed for your Y pipe.
- Y pipe may be NORS
-
This listing covers MY's 1975, 1976, 1977, Dodge D100's, 1978, 1979, and 1980 D100's & D150, 1981 D150's and 1975, 1978, 1979, 1980, 1981 D200's stock with the 170ci 6 cyl and start behind the catalytic converter. If the pipes forward of the converter and/or the converter are needed, please contact us for availability and pricing.
- For MY 1975 this cat-back single exhaust system consists of the muffler and tailpipe.
- For MY's 1976-78 & 1980-81 (MY '78, '80 & '81 this is for systems without sound control) this cat-back single exhaust system consists of the muffler, front tailpipe and rear tailpipe.
- For MY 1979 D100 & D150's this cat-back single exhaust consists of the rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
- For MY 1979 D200's this single cat-back exhaust consists of the center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe & rear tailpipe.
-
This listing covers MY's 1975 D100 & D200's, 1976 & 1977 D100's, 1978 & 1979 D100, D150, & D200's, 1980 & 1981 D150 & D200's, 1982, 1983, 1984, 1985, & 1986 D150 & D250's, and 1987, 1988, and 1989 D150's with their respective stock V8 (318ci, 360ci, 400ci, and 440ci) and starts behind the catalytic converter. If the pipes forward of the converter and/or the converter are needed, please contact us for availability and pricing.
- For MY 1975 D100 & D200's w/318ci or 360ci this cat-back single exhaust consists of the muffler and tailpipe.
- For MY's 1976-77 D100's w/318ci or 360ci this cat-back single exhaust consists of the muffler, front tailpipe, center tailpipe, and rear tailpipe.
- For MY 1978 D100, D150 & D200's w/318ci, 360ci, 400ci, or 440ci this cat-back single exhaust consists of the rear exhaust pipe, muffler, front tailpipe, center tailpipe, & rear tailpipe.
- For MY 1979 D100, D150 & D200's w/318ci or 360ci this cat-back single exhaust consists of center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe & rear tailpipe.
- For MY's 1980-81 D150 & D200's w/318ci or 360ci this single cat-back exhaust consists the muffler, front tailpipe, center tailpipe, & rear tailpipe.
- For MY's 1982-87 D150 w/318ci or 360ci & MY 1988 w/360ci this single cat-back exhaust consists of the muffler, front tailpipe, center tailpipe & rear tailpipe.
- For MY's 1982-86 D250's w/318ci or 360ci & 1988-89 D150 w/318ci this single cat-back exhaust consist of the rear exhaust pipe, muffler, front tailpipe, center tailpipe, & rear tailpipe.
-
This listing covers MY's 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 & 1989 Dodge D100's, D150's and D250's with the stock 6 cyl and starts behind the catalytic converter. If the pipes forward of the converter and/or the converter are needed, please contact us for availability and pricing. Photo depicts the stock cat-back single exhaust for 1980-87 Dodge D100's, D150's, D200's & D250's with the stock slant 6 225ci and 131" WB (also shown in photo is the rear section of the stock catalytic converter built for this customer).
- For MY's 1980-87 D100's w/225ci this single exhaust consists of muffler, front tailpipe and rear tailpipe.
- For MY's 1982-83 D150's & 1982-86 D250's w/225ci this single cat-back exhaust consists of the muffler, front tailpipe and rear tailpipe.
- For MY's 1984-87 D150's & 1987 D250's w/225ci this single cat-back exhaust consists of the rear exhaust pipe, muffler, front tailpipe and rear tailpipe.
- For MY's 1988-89 D150's & D250's w/3.9L this single cat-back exhaust consists of the muffler, front tailpipe, center tailpipe, and rear tailpipe.
-
This listing covers MY's 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 & 1980 Scouts with the stock V8 304ci or 345ci and single exhaust. Photo depict the system for MY's 1973-77 Scouts with the 108"WB and the stock 304ci or 345ci V8 (tail pipes vary between wheelbases).
- For MY's 1971-78 this single exhaust system consists of the LS/RS front exhaust pipes, Y pipe (AKA rear exhaust pipe), muffler, and tailpipe.
- For MY's 1979-80 this single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe and rear tailpipe.
- Y pipe may be NORS