- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Waldron's does not have the needed gasket available.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Oldsmobile's with the stock 6 cyl. Photo depicts system for a 1933 Olds F33. -
This listing helps you convert your 1949, 1950, 1951, 1952, 1953, 1954, and 1955 Oldsmobile with stock single exhaust to a dual exhaust system. Excludes models with Power Brakes. Our patterns do not accommodate vehicles with power brakes. If your 1949-55 Olds has power brakes, this system will not fit. Photo depicts the dual conversion system (with mufflers) for 1953-55 Olds with the stock V8. Photo shows a system that the tail pipes have been cut to reduce the shipping cost (and can also make installation easier).- The dual conversion exhaust kit consists of LS front & rear exhaust pipes, RS exhaust pipe, LS/RS glasspacks, LS/RS tailpipes, gaskets and clamps. We will provide a blocker plate for MY's 1954-55. This kit does not come with the hangers.
-
This listing covers model years 1967 GTX, 1968, 1969, and 1970 GTX and Road Runners stock with a 440ci or a 426ci. Photo depicted is correct to the listing.- Dual exhaust consists of the H pipe (2 pc.), LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2½" and reduces down to 2¼" at the outlet ends of the H pipe and stays 2¼" through out the tailpipes.
- MY's 1968-1970 will be asked to select the desire tailpipe exit; with turndowns or with straight exit to be used with tips.
-
This listing covers model years 1946, 1947, 1948,1949, 1950, 1951, 1952, 1953, and 1954 Pontiac's Torpedo, Streamliner, and Chieftain's with the stock 6 cyl or 8 cyl engine. Photos depicts system for MY's 1946-48 Pontiac Torpedo with the stock 6 cyl. w/the tailpipe cut (for shipping savings).- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Models 24, 25, 26, 27, 28 and 29, be specific as to model ID when placing the order.
-
This listing covers model years 1978-1979 with the stock 403ci or 400ci Special Performance V8's, 1980 301W & 301T High Performance V8's, & 1981's with the stock 301T High Performance Trans Am and Formula's. Excludes 1980-81 Trans Am/Formula's with the stock 305ci which did not come stock with split tips. For that system refer to SKU 453249 Photo depicts the stock single-into-dual exhaust for 1978-79 Pontiac Firebird Trans Am's with the stock 400ci with the stock split chrome tips which may be added to your order.- Single to dual cat-back system consists of rear Y pipe, LS/RS mufflers, LS/RS front tailpipe, and LS/RS rear tailpipes designed for you to slip on & weld the split chrome tips.
- You may add a set of the Split Chrome Tips to your order in the checkout process.
- Y pipe may be NORS.
-
This listing covers model years 1920, 1921, 1924, 1925, 1926,1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Erskine, Commander, Dictator, model 54, model 55, model 56, Champion, Land Cruiser, Hawk, and Lark's with the stock 6 cyl. For MY's 1922-23 we have the exhaust pipe pattern (only). If interested in pricing, please give us a call. Photo depicts the stock single exhaust for 1959-60 Studebaker Lark Convertibles with the stock 170ci 6cyl.- For MY's 1920-58 this single exhaust consists of exhaust pipe, muffler, and tailpipe.
- For MY's 1959-66 All Models Except Convertibles & 1963-66 Station Wagon's with a sliding roof this single exhaust consist of exhaust pipe, muffler, and tailpipe.
- For MY's 1959-66 Convertibles & 1963-66 Station Wagons with a Sliding Roof this single exhaust consists of the exhaust pipe, muffler, front tailpipe & rear tailpipe. Do NOT select the cut option on this systems.
- 1963-66 Station Wagons will be asked to report whether your Station Wagon was or was not stock with the sliding roof in the check out process.
-
This listing model years 1966, 1967, 1968, 1969, 1970, 1971, and 1972 models J-262, J-264, J-362, J-364 Gladiator's, J-162, J-164 Station Wagon & Panel Delivery with the stock V8 304ci, 350ci, or 360ci. Photo depicts the system for a 1970 Jeep Wagoneer.- Single exhaust system consists of LS crossover pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1968, 1969, 1970, 1971, and 1972 Chevy K10 & K20's (excludes K30's) with the stock V8. For C Series; refer to listing 453324. Photos depicts the stock single exhaust for 1971-72 Chevy Blazer's with the stock 350ci V8. The single exhaust for the C series truck's consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. The single exhaust for the K series truck's consists of the cross over pipe, Y pipe, muffler, and tailpipe. -
This listing covers MY's 1957, 1958, 1959, and 1960 Dodge D100, D200, D300 or W300 stock with the stock 318ci V8. Photo is correct to the listing for all 1957-60 D100, D200, D300 & W300 with the stock 318ci and Y pipe with Option 2 flange rotation.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and OE correct short tailpipe.
- You will be asked to report which of the 2 flange rotation options is needed for your Y pipe.
- Y pipe may be NORS
-
This listing covers MY's 1954, 1955, and 1956 Dodge ½T's with the stock V8. Photo is correct to the listing.- Single exhaust system consists of cross-over pipe, Y pipe (AKA 2 pc. Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
Set of 4 OEM style hangers - 2 at the muffler and 2 at the tailpipes. Kit includes OEM correct rear tail pipe clamps. This set of OEM style hangers will fit all 1964-72 GM A-Body styles. Excluding Vista Cruisers and/or Station Wagons. Muffler hangers : ALL 68-72 A body / $49 per pair Tailpipe hangers: 64-67 Cutlass & 442 (without chambered tailpipe): $34 per pair 68-9 Olds 442 (for chrome tips): $57 per pair 68-69 Cutlass (without chrome tips): $45 per pair 70-72 Olds 442: $57 per pair 70-72 dual without bumper cutouts or trumpets: $45 per pair 70-72 Chevelle dual (without resonators or chrome tips): $45 per pair 68-71 Pontiac LeMans/Tempest/GTO: $57 per pair To order individual components, please call us at 800-503-9428. Hangers generally will ship within 1 wk. -
These OEM correct resonator hangers will fit MY's 1966, 1967, 1968, and 1969 Lincoln Continentals. Hangers generally will ship within 1 wk. -
This listing covers MY's 1955 and 1956 Packard Patrician, Caribbean, 400, Executive, Clipper Super, & Custom's with the stock V8. Excludes 1955 Packard convertibles which we do not have the needed patterns to reproduce at this time. Photo depicts the dual exhaust system with resonators for a 1956 Packard Patrician or Caribbean with the stock V8- Dual exhaust consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes with resonators built in.
- Waldron's does not offer a "with cut pipes" option on this dual exhaust.
-
This chrome turndown tip is cut parallel to the ground and is approximately 9" in length. Designed to fit over your tailpipe and weld in place. Available in 1½"ID, 1¾" ID, 2" ID & 2¼" ID for $20.00 (per), 2½" ID for $30.00 (per), and 3" ID for $50.00 (per). Tips generally will ship within 1 wk. -
Waldron's Exhaust is excited to announce we are now reproducing the Fairlane K Code Arvinode dual exhaust system. Convert your 1963, 1964, or 1965 Ford Fairlane A code with 260ci, standard 289ci, or HiPo 289ci (even if it was stock with a single exhaust) to this dual exhaust system with the sought after Arvinode tone. Photo is correct to the listing.- This system consists of the LS/RS muffler/resonator assembly. If the H pipe is needed, please add it to your cart in the check out process. We will build the correct H pipe to the engine reported on your order.
- There is not an option for tips on the Fairlane Arvinode system.
-
This listing covers MY's 1935, 1936, and 1937 Ford 1½T's trucks with the stock V8. Photo depicts the stock single exhaust for 1936 Ford 1½T trucks with the stock 221ci V8 4WD 157"WB where customer selected option 2 on the flange rotation.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. You will be ask to report the flange rotation in the check out process.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Rebel's, Ambassador's, Marlin's, Matador's and Hornet's with the stock V8 and stock with a dual exhaust. Photo depicts the exhaust system for 1974 Matador & Ambassador (rear exhaust pipes and tailpipes vary between body styles).- This dual exhaust system consists of LS/RS exhaust pipes, LS,RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 AMC Rebel, Ambassador, Marlin, Javelin, Hornet, Gremlin, Pacer, and Matador with the stock 6cyl. For American & Ramblers, refer to SKU 558616. Photo depicts the system for MY's 1976-77 AMC Gremlin's with the stock 6 cyl. 1 bbl carb. and stock without a converter.- System consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
- 1975-79 For some in these model years the system will require a catalytic converter. Please give us a call for pricing and availability.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, and 1934 American Austin's and 1938, 1939, and 1940 American Bantam's. Photo depicts system for MY's 1938-40 Bantam.- The single exhaust consists of the exhaust pipe, muffler and tailpipe.
- Exhaust pipes is 1½" OD with a 4blt flange.
- Gaskets are NA
- Please note that these tailpipes are 1" OD and will be Mild Steel (1" OD tubing is not available in either aluminized or T409 stainless steel) no matter which material you choose for the system. Also 1" clamps are not available in stainless steel so clamps needed at the tailpipe will be steel (only).
-
This listing covers model years 1949, 1950, 1951, and 1952 Buick's 8 cyl. Photo depicts the stock exhaust for 1949 Series 70 Roadmaster's.- MY 1949 this single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1950-52 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick V8 single exhaust with 2 mufflers. Photos depicts the system for 1966-67 LeSabre's stock with muffler and resonator & 68 LeSabre's (this MY did not have muffler only option from the factory).- Single exhaust system includes Y pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe. Metal-to-metal connection at the manifolds, no gaskets required.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Calais, Deville and Fleetwood's with a V8 and stock single exhaust. Excludes diesel engines. Photo depicts the system for 1975-76 Calais' and Deville's. Photo does not show the catalytic converter which is located between the Y (AKA front exhaust) pipe and rear exhaust pipe and must be in place for system to fit properly.- This single exhaust system consists of front (Y) exhaust pipe, rear exhaust pipe, front muffler, connector pipe, and resonator w/tailspout.
-
This listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, & 1971 New Yorker, Newport and 300's. Photo depicts the system for a 1965 Chrysler New Yorker.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Challenger's with the stock 340ci, 383ci, or 440ci and the stock dual exhaust system with mufflers and resonators. Excludes 426ci engine since that system requires an H pipe. Photo depicts the system for 1970-71 Dodge Challenger's stock with the 440ci and 3-2 bbl carburetor set-up.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers w/tailspout (only certain set-ups).
- 1970-71 Models vary at the mufflers with some systems (depending on engine and carburetor setup) stock with chrome tips which are NOT part of this system while others have a turndown welded to the end of the mufflers. You will be asked to report which you need in the check out process.
-
Listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Custom, LTD, and Galaxie's with stock V8 and single exhaust. Photo depicts the system for a 1972 Ford with the stock 429ci V8.- Some model years and body styles consist of the Y pipe, muffler, and tailpipe while other model years and body style consists of the Y pipe, muffler, front tailpipe and rear tailpipe. Y pipe may be NORS.
-
Listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1969, and 1970 Falcon's including SW & 1960-66 Ranchero's with the stock 6cyl. If you have a 1967-70 Ranchero; refer to SKU 518766 Photos depicts the system for MY's 1960-61 Ranchero's and station wagon's with the stock 6cyl.- Single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing is for 1965 and 1966 Mustangs stock with the 4 muffler dual exhaust. This listing is not for K Code Mustangs that were stock with the Arvinode dual exhaust or for A Codes that would like to have the Arvinode dual exhaust. For the Arvinode dual exhaust set up please refer to listing 518737. Photo depicted is correct to the listing.- This dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS over-axle pipes, LS/RS resonators and LS/RS tailspouts.
-
Photo depicts the stock single exhaust (minus the needed converter) for 1977-78 Mustangs stock with the 302ci V8 & a 12" catalytic converter.- Single cat-back consists of the rear exhaust pipe, resonator, over-axle pipe, muffler, and tailpipe.
- If the Y pipe (AKA front exhaust pipe) is needed, you may add it to your order in the check out process. You will be asked to confirm whether needed or not.
- If you are in need of the catalytic converter, please give us a call at 1-800-503-9428.
-
This listing covers model years 1957, 1958, 1959, and 1960 Olds 88 and 98's with the stock V8 and single exhaust w/1 mufflers. Excludes station wagons, refer to listing 428534. Photo depicts the stock single exhaust for 1959-60 Oldsmobile 88's with the stock V8- Single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, front tailpipe, and rear tailpipe.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds F85 and Cutlass' with the stock V8 stock dual exhaust or for MY's 1965-74 you may convert your single exhaust to a dual exhaust. We will supply you with the needed blocker plate. For MY 1964 this dual exhaust is for F85's /4-4-2 STOCK with a dual exhaust. We do NOT offer a single-to-dual conversion. If your 1964 Cutlass/F85 was stock with a single than we can help you out with a single exhaust (only). Photo depicts the system for a 1971 Cutlass 4-4-2 with the stock 455ci engine.- This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- You will be asked to report the stock set-up in the the check out process.
- 1964-67 models will be required to report the inside diameter of the driver side manifold.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Olds 98, 88, Starfire, Super, Dynamic, and Jetstar's, including station wagon's, with their perspective stock V8 and dual exhaust. Photo depicts the system for MY's 1959-60 Model 98.- For MY's 1961-62 this dual exhaust system consists of the LS/RS front exhaust pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe.
- For MY's 1963-64 this dual exhaust system consists of the LS exhaust pipe, RS front and rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers with tailpipe.
- For 1965 Starfire this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator. It does not include the chrome tips.
- For MY's 1965 (other than the Starfire)-74 this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator w/tail spouts.
- 1969-70 Olds 98's were stock with a single exhaust (only). You may convert to a dual exhaust system if the driver side manifold points to the rear with a 45° angle (like 1967-68 models).
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Road Runner, Belvedere, and Satellite's with the stock 383ci, 340ci or 400ci V8 & dual exhaust. 1970-74 Plymouth Fury's refer to SKU 438521. This listing excludes 1971-74 models with the 440ci. The OE exhaust pipes for the 440ci were never reproduced in the after-market world. We can help you out with mufflers and tailpipes (only). If you have original exhaust pipe for the 440ci, contact us at 800-503-9428. The 318ci V8 was stock with a single exhaust only. Photo depicts the stock dual exhaust for 1970 Plymouth Belvedere's, Satellite's & Road Runners with the stock 383ci & 4BBl carburetor where customer selected tailpipes to exit for chrome tips.- Dual exhaust varies between model names, body styles and engines. Some systems consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes while others have LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1955, 1956, 1957 (excluding vehicles with fuel injection), 1958, 1959, and 1960 Chieftain, Star Chief, Super Chief, Bonneville, Catalina, and Ventura's with the stock V8. Photo depicts the single exhaust for a 1955 Chieftain with the stock V8 (shown with tailpipe cut to reduce shipping cost).- MY's 1955-56 single exhaust system consists of the Y pipe (with flange connection to the rear exhaust pipe), rear exhaust pipe, muffler and tailpipe. This system requires 2 gaskets.
- MY's 1957-60 single exhaust system consists of the crossover pipe, exhaust pipe, muffler and tailpipe. This system requires 3 gaskets.
-
This listing covers model years 1961, 1962, and 1963 Lemans and Tempest's stock with a 4 cyl engine. Photo depicts the stock single exhaust for 1962 Pontiac Lemans & Tempest with the stock 4 cyl engine and 4bbl carburetor.- Single exhaust consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. Crossover pipe will be mild steel due to unique pipe diameter of 1&1/8"OD.
- Waldron's Exhaust does not have the needed gaskets available.
- 1962 and 1963 models will be asked to report the stock carburetor set-up in the check out process.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, and 1969 Dodge D100, W100, D200, W200, D300, & W300's, 1970 & 1971 D100, D200, D300 & W300's stock with the V8 except the 383ci as the Y pipe for the 383ci has never been reproduced for this MY's. Give us a call to see what we can do for you at 800-503-9428. Photo depicts the stock single exhaust for 1967-68 D100 ½T's & D200 ¾T's Regular Cab with 127" WB and the stock 318ci V8- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
- For 1961-64 models, this system is for conventional cabs only.
- 1965-68 models will be asked to report the serial number. We will need to know if it falls before or after SN 166800. The difference being that early models require flat gaskets at the manifold while the later models are a metal-to-metal connection at the manifold.
- 1969-71 models will be asked to report whether the truck is stock with or without a cowl.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 International C1, D1, D2, C5, C15, D15, K1, K2, KB1, KB2, KB3's stock with the 6 cyl. Photos depicts the system for 1947, 1948 & 1949 International ½T-2T trucks.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Exhaust pipe will come with a universal flange, reuse the original cast iron flange (if possible).
