- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS muffler assembly, and LS/RS tailpipes.
- Shipping full length is the only option under this listing.
-
For Packard MY's 1957 and 1958 Clippers, Hawks, Golden Hawks & Luxurys. -
This listing covers 1982, 1983, and 1984 Trans Am's with the stock 305H.
- Single to dual cat-back system consists of the rear Y pipe, H pipe (sits between), single in/single out LS/RS transverse mufflers, and LS/RS tailpipes. Y pipe and H pipe may be NORS.
- Split chrome tips were not an option on these vehicles.
- If front Y pipe and/or converter are needed, please contact us for pricing and availability.
-
For Packard MY's 1955 and 1956 Patrician, Caribbean's, Executive, 400, Clipper Super & Custom's, this is a resonator eliminator option (for the stock system refer to listing 454498). Photo depicts the dual system for 1956 Executive, Clipper Super, & Custom's with a 352ci, torsion bar suspension and the stock resonator eliminated.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS muffler assembly, and LS/RS tailpipes.
- Our patterns for MY 1956 Clipper Super's, Custom's & Executive's are for models with torsion bar suspension.
- Shipping full length is the only option under this listing.
-
This listing covers model years 1967, 1968, 1969, and 1970 Eldorado's with a stock dual exhaust. Photo depicts the system for 1970 Eldorado's- Dual exhaust system consists of LS/RS front, LS/RS rear exhaust pipes, dual in/single out transverse muffler, and LS exit tailpipe with resonator.
-
This listing covers MY's 1975, 1976, 1977, and 1978 Chevy C10, K10, C20, K20, C30, K30 & Suburban's with the stock 350ci, 400ci, & 454ci. For 1975-78 Suburban's with the 454ci this is a resonator eliminator option since all were stock with resonators. Photo depicts the stock dual exhaust for 1975 Chevy C10's with the stock 454ci.- Dual exhaust system for the 2 WD C Series consists of LS/RS exhaust pipes, LS/RS mufflers, & LS/RS tailpipes.
- Dual exhaust system for the 4 WD K Series & Suburban's consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers & LS/RS tailpipes.
-
This listing covers MY's 1966, 1967, 1968, & 1969 Pontiac Custom, GTO, Lemans, & Tempest with Ram Air or High Output, 1970 models with Ram Air, and 1971-72 models with High Output. If your MY 1966, 1967, or 1969 was stock with 4 mufflers, refer to listing 453477. For systems w/o RA or HO, refer to listing 453210. Photo depicts the stock dual exhaust system for 1967 Pontiac Lemans, Tempest, and Custom with RA or HO manifolds on the stock 400ci V8 & standard transmission (this is a resonator eliminator system for 1967 GTO's with RA or HO & STD trans).- This dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2¼"OD on the exhaust pipes which reduce to 2"OD at the muffler inlets and then increases to 2¼" OD at the tailpipes.
- For MY's 1970-72, this system does not include the chrome tips but will be designed to fit up to the stock tip design.
- If the cast iron flanges are needed, add them to your cart for an additional $45.00.
- Metal-to-metal connection at the manifolds. Gaskets are not required.
-
This listing covers MY's 1966, 1967, and 1969 Pontiac GTO, Tempest, and Lemans' stock with a dual exhaust system with mufflers and resonators. 1968 all mid-size's & 1969 GTO's with a 400ci & standard transmission were all stock with mufflers only, for the correct system refer to listing 453475 if you have a HO or Ram Air set-up or 453210 for non-HO or Ram Air. Photos depicts the system for a 1969 GTO stock w/automatic transmission.- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with turndowns.
- In the check out process you will be asked to report w/ or w/o Ram Air or HO. There is an additional cost of $50.00 in aluminized steel or $100.00 in T409 for RA or HO. You will also be asked whether you have the cast iron flanges or if you need them added to your cart. If you already have the needed cast iron, you will need to send them to Waldron's in advance.
- 1966 & 1967 resonators are bullet style while 1969 resonators are cannister style.
-
This listing covers model years 1975, 1976, 1977, and 1978 GMC ½T 1500, ¾T 2500 and 1T 3500's stock with the 454ci V8. Photo depicts the stock dual exhaust for 1975 GMC 1500 ½T with the stock 454ci.
- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS tailpipes.
-
Photo depicted is correct to the listing.- Dual exhaust system consists of the H pipe, LS/RS resonators, LS/RS connector pipes, LS/RS over-axle pipes, and LS/RS mufflers with tailspout or set up for tips. Let us know how you would like your system to exit in the check out process.
- This system starts out at 2½"OD and reduces to 2¼"OD as the H pipe goes into the resonators and stays at 2¼"OD until the muffler outlets where it reduces down to 2"ID.
- This system is a metal-to metal connection at the manifold and does not use gaskets.
-
This listing covers model years 1972, 1973, and 1974 Torino's and Ranchero's stock with a V8 and dual exhaust. 1972-74's stock with the 429ci were stock with a single exhaust only. Photo depicts the stock dual exhaust for 1972 Torino's (exc. Ranchero & SW) with the stock 351C V8- Dual exhaust system consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes. Chrome tips are not included. This system is a metal-to-metal connection at the manifolds and does not require gaskets.
-
Photo depicted is correct to the listing.- This dual exhaust in unique and consists of the H pipe, LS/RS rear exhaust pipe, LS/RS mufflers, LS/RS tailpipes, and transverse resonator.
-
This listing is for 1965 and 1966 Mustangs stock with the 4 muffler dual exhaust. This listing is not for K Code Mustangs that were stock with the Arvinode dual exhaust or for A Codes that would like to have the Arvinode dual exhaust. For the Arvinode dual exhaust set up please refer to listing 518737. Photo depicted is correct to the listing.- This dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS over-axle pipes, LS/RS resonators and LS/RS tailspouts.
-
This listing covers model years 1975, 1976, and 1977 Newport and New Yorker's with the stock V8 with 2 converters. This listing excludes 1976 models with the 440ci.
- Dual exhaust cat-back system starts behind the LS/RS converters and consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1960 & 1961 (without Ram Induction), 1962, 1963, and 1964 300's with dual exhaust and mufflers only (no resonators). If your 1960-61 Chrysler 300 was stock with Ram Induction refer to SKU 5987697. If your 1962-64 Chrysler 300 is stock with the Cross Ram engine, refer to listing 598702. Photo depicts the system for 1963-64 Chrysler 300's.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- We received many inquiries regarding this system fitting 1963-64 New Yorker's. It will NOT due to the fact that the engine on the New Yorker's sits 1" higher to the manifold.
-
This listing covers MY's 1967 and 1968 Chevy Camaro with the stock V8 and a dual system that was stock with transverse muffler and resonators. Photo depicted is correct to the listing however exhaust pipes vary per stock V8.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS over-axle pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Chevelle, Malibu and Monte Carlo's with the V8 and stock with mufflers and resonators. Photo depicts the stock dual exhaust with bullet style resonators for 1970 Chevelle & Monte Carlo's with the stock 396ci.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers and LS/RS tail pipes with resonator. For MY's 1970-72; you will be asked to select bullet or barrel style resonators. MY's 1973-74 are bullet style resonators (only).
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, and 1969 Chevelle, Malibu, and El Camino's with the stock V8. Some systems were stock with resonators and if you would like to keep your system OE correct with the resonators, please refer to 588643. Photo depicts the stock dual exhaust for 1965-67 Chevelle & Malibu's with the stock 396ci V8.- Dual exhaust system includes LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1961, 1962, 1963, and 1964 Chevy Impala, Bel Air, Biscayne, and Super Sport's with the stock V8 283ci, 327ci (small or big block), 348ci (small or big block), and 409ci (big block) and allows you to eliminate the resonators (all MY's & body styles were stock with resonators). Photo depicted is correct to the listing but pipes vary slightly depending on engine displacement, body style, etc.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes, and LS/RS tailpipes.
- Big Block engines will have an additional cost of $40.00 added to system price.
- Our pattern exhaust pipes have the piece that some call an extension (we call it an insert) incorporated into the exhaust pipes. If you would prefer to have the insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1959 and 1960 Chevy Full Size Bel Air, Biscayne and Impala with the stock dual exhaust but with the stock resonators eliminated. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators eliminated, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.
-
Photo is correct to the listing. If you aren't concerned about staying true to the stock system and would like to eliminate the cross-over pipe & Y pipes or if you have late model motor mounts; refer to 588605.- This listing is for the original stock design with the early model motor mount and consists of LS/RS crossover pipes, LS/RS Y pipes, LS/RS mufflers and LS/RS tailpipes.
- It has been brought to our attention that vehicles using the late model motor mounts will have fitment issues with the cross-over pipes and we suggest that you order the alternative design or be prepared to make modifications.
-
This listing covers model years 1930, 1931, 1932 & 1933 Cadillac's stock with dual exhaust and their respective stock V12 or V16. Photo depicts the stock dual exhaust for 1931-33 Cadillac Models 370A, 370B & 370C with the stock V12.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Exhaust pipes originally used cast iron flanges. We do not have them available and no flanges will come with the system.
- MY 1930 exhaust pipe is stock 2¼" and reduces to 1¾" at the muffler outlets.
- MY's 1931-32 exhaust pipe is stock at 2½" and reduces to 1 7/8" at the muffler outlets.
-
This listing covers MY's 1935 and 1936 Auburn Supercharged. Our photo depicts this system with the exhaust pipe assembly painted, assembled into 1 unit and ready to install. If you are a lover of these unique Auburns with the Supercharged 8, you will likely be aware that no 2 exhaust pipe assemblies are a like.- Our single exhaust system will consist of the parts needed to assemble exhaust pipe unit (4 down pipes, 2 Y pipes & 4 pcs. of stainless steel flex wrap), muffler and tailpipe.
- If you have the original cast iron flanges, you will want to keep them to reuse on your new exhaust pipe unit.
-
This listing cover the model year 1957 only. Image is a copy of the system schematics.- This dual exhaust system consists of LS front exhaust pipe, LS rear exhaust pipe, RS exhaust pipe, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers MY's 1957, 1958, 1959, 1960 ,1961, 1962/ 1963, 1964, 1965, and 1966 Chrysler Imperials. MY 1959 - we will need to know your VIN due to mid-year change. MY's 1959-61 - we will need to know type of suspension. Photo depicts the system for 1962-66 Chrysler Imperials.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailpipes.
- When installing the system for 1957 and 1958 Imperial's (except convertibles and 4 dr. hardtops) the transmission crossmember will need to be removed in order to install the resonators.
-
This listing covers MY's 1956 with either the 292ci or the 312vi V8 and 1957 Ford Thunderbirds with the 312ci V8. The 292ci did not come stock with resonators. Refer to listing 518899 for a '57 T-bird with a 292ci or if you want to delete the resonator. Photos depicts the exhaust pipes and mufflers for 1956 and 1957 Thunderbirds, the front and rear tailpipes vary depending on engine and transmission.- This dual exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS tailpipes.
-
This listing covers model years 1957, 1958, 1959, 1960, 1961, and 1962 New Yorker, 300, and Windsor's V8 dual exhaust stock with 2 mufflers and 2 resonators. In 1962 the New Yorker Station Wagons are the only body style given a stock dual exhaust, all other New Yorker body styles were stock with a single exhaust. Excludes 300's with the Ram Induction set-up. Photo depicts the system for a 1960 New Yorker.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, and LS/RS tailpipes.
-
This listing is for 1971 GMC Sprint and the photo is correct to the listing.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Montego's, Cyclone's, Cyclone GT's with their respective stock V8; 390ci 302ci, 428CJ, 351ci, 429ci, 429CJ or 429SCJ. Photo depicts the stock dual exhaust for 1969 Mercury Montego's & Cyclones with the stock 390ci.- This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing covers MY's 1975 and 1976 (last year for a stock dual system from the factory) Mercury Cougar's stock with a V8 460ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This dual exhaust system starts behind the stock converter(s) and consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS. You will need to report the catalytic converter set-up in the check out process.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Cougar's & GT's with their respective stock V8: 302ci, 390ci, 427ci, 428ci, 351ci, 429ci, or 460ci. Photo depicts the system for a 1969 Cougar with the stock 351W.- For MY's 1968-73: This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
- For MY 1974: This dual exhaust consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing is for MY 1967 Cougar's with the stock 390ci and a dual exhaust.
- This dual exhaust consists of the H pipe, LS/RS rear exhaust pipes w/resonators, dual in/dual out transverse muffler, and LS/RS tailpipes. Resonators are conventional style on non-GT's and glasspack style on GT's.
-
This listing covers MY's 1966, 1967, 1968, 1969, and 1970 Mercury Comets with their respective stock V8: 390ci, 427ci, 302ci, 428CJ, 351ci, 429ci, 429CJ & 429SCJ. For MY 1967 this is a resonator eliminator option as this model year was stock with a transverse resonator between tailpipes. For that listing, refer to 453471. Photo depicts the stock dual exhaust for 1966 Comets (Cyclones) with the stock 390ci.- Dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing covers MY's 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, & 1993 Mercury Marquis' ('80-82), Grand Marquis' & Colony Park's with the respective stock MY V8's: 302ci, 351ci, & 4.6L. Photo depicts the dual cat-back exhaust system for 1990-91 Marquis' with the stock 302ci.- Dual exhaust starts behind the LS/RS catalytic converters (which must be in place) and consists of a NORS H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1975 and 1976 Marquis' and Colony Park's with the stock 460ci V8. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Dual cat-back exhaust system consists of the H pipe (will be in 2 pcs. unless you have a SW, SW H pipes will be in 1 pc.), LS/RS mufflers, and LS/RS tailpipes.
- Report the converter set-up in the check out process.
-
This listing covers model years 1971, 1972, 1973, 1974, 1975, 1976, 1977, and 1978 International Scout's with the stock 304ci or 345ci and stock with dual exhaust. The photo depicts the system for MY's 1971-78 Scout's with 100" WB.- This dual exhaust system consists of LS/RS front exhaust pipes (with flat spots in the stock locations), LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1967, 1968, and 1969 Firebird's with the stock V8 and stock dual exhaust. Photos depicts the exhaust system for MY's 1967-68 Firebirds stock V8 (except 400HO & Ram Air).- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
- The system for the Non HO or RA engines starts out at 2"OD, increases to 2¼"OD at the connector pipes, then decreases back to 2"OD.
- The system exhaust pipes for HO & RA engines are 2¼"OD flared to 2½"OD at the manifolds, connector pipes are 2¼"OD and then reduces to 2"OD on the tailpipes.
- Regarding HO & RA setups: We are no longer able of offer the stock cast iron flanges. The exhaust pipes will come with universal flanges. If you have the stock cast iron flanges, keep them and reuse them.