- Dual exhaust consists of the H pipe (2 pc.), LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2½" and reduces down to 2¼" at the outlet ends of the H pipe and stays 2¼" through out the tailpipes.
- MY's 1968-1970 will be asked to select the desire tailpipe exit; with turndowns or with straight exit to be used with tips.
-
This listing covers model years 1967 GTX, 1968, 1969, and 1970 GTX and Road Runners stock with a 440ci or a 426ci. Photo depicted is correct to the listing. -
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Olds 98, 88, Starfire, Super, Dynamic, and Jetstar's, including station wagon's, with their perspective stock V8 and dual exhaust. Photo depicts the system for MY's 1959-60 Model 98.- For MY's 1961-62 this dual exhaust system consists of the LS/RS front exhaust pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe.
- For MY's 1963-64 this dual exhaust system consists of the LS exhaust pipe, RS front and rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers with tailpipe.
- For 1965 Starfire this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator. It does not include the chrome tips.
- For MY's 1965 (other than the Starfire)-74 this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator w/tail spouts.
- 1969-70 Olds 98's were stock with a single exhaust (only). You may convert to a dual exhaust system if the driver side manifold points to the rear with a 45° angle (like 1967-68 models).
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds F85 and Cutlass' with the stock V8 stock dual exhaust or for MY's 1965-74 you may convert your single exhaust to a dual exhaust. We will supply you with the needed blocker plate. For MY 1964 this dual exhaust is for F85's /4-4-2 STOCK with a dual exhaust. We do NOT offer a single-to-dual conversion. If your 1964 Cutlass/F85 was stock with a single than we can help you out with a single exhaust (only). Photo depicts the system for a 1971 Cutlass 4-4-2 with the stock 455ci engine.- This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- You will be asked to report the stock set-up in the the check out process.
- 1964-67 models will be required to report the inside diameter of the driver side manifold.
-
This listing covers model years 1957, 1958, 1959, and 1960 Olds 88 and 98's with the stock V8 and single exhaust w/1 mufflers. Excludes station wagons, refer to listing 428534. Photo depicts the stock single exhaust for 1959-60 Oldsmobile 88's with the stock V8- Single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, front tailpipe, and rear tailpipe.
-
This listing is for 1965 and 1966 Mustangs stock with the 4 muffler dual exhaust. This listing is not for K Code Mustangs that were stock with the Arvinode dual exhaust or for A Codes that would like to have the Arvinode dual exhaust. For the Arvinode dual exhaust set up please refer to listing 518737. Photo depicted is correct to the listing.- This dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS over-axle pipes, LS/RS resonators and LS/RS tailspouts.
-
This listing covers model years 1963, 1964, 1965, 1966, 1967, 1968, 1969 and 1970 Falcon's and 1963-66 Ranchero's with the stock V8 and single exhaust. If you have a 1967-70 Ranchero; refer to SKU 518767 Photo depict the system for a 1963 Falcon Station Wagon with the stock 260ci.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
Listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Custom, LTD, and Galaxie's with stock V8 and single exhaust. Photo depicts the system for a 1972 Ford with the stock 429ci V8.- Some model years and body styles consist of the Y pipe, muffler, and tailpipe while other model years and body style consists of the Y pipe, muffler, front tailpipe and rear tailpipe. Y pipe may be NORS.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Challenger's with the stock 340ci, 383ci, or 440ci and the stock dual exhaust system with mufflers and resonators. Excludes 426ci engine since that system requires an H pipe. Photo depicts the system for 1970-71 Dodge Challenger's stock with the 440ci and 3-2 bbl carburetor set-up.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers w/tailspout (only certain set-ups).
- 1970-71 Models vary at the mufflers with some systems (depending on engine and carburetor setup) stock with chrome tips which are NOT part of this system while others have a turndown welded to the end of the mufflers. You will be asked to report which you need in the check out process.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936,1937, 1938, 1939, 1940, 1941, 1942, 1946, 1947, and 1948 Chevrolet's with the stock 6 cyl. Photos depicts the system for a 1939 Chevrolet Master 4 dr.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- The last 15" of the tailpipe on 1946-48 models will be flatten to an oval shape.
-
This listing covers model years 1968, 1969, and 1970 Cadillac Calais, Deville, Fleetwood, and Commercial Chassis' with V8 and stock single exhaust. Photos depicts the system for 1968 Calais' and Deville's.- Single exhaust consists of Y pipe, rear exhaust pipe, muffler, connector pipe, resonator and short tailpipe.
-
This listing covers model years 1949, 1950, and 1951 Cadillac's with the stock V8. Photo depicts the system for 1949 Cadillac's.- Single exhaust system consists of the cross-over pipe (manifold to manifold), exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1934, 1935, 1936, 1937, 1938, 1939, and 1940 LaSalle's. For MY 1936 this is a resonator eliminator option as all 1936 LaSalle's were stock with 2 mufflers. For the OE correct system for 1936 refer to 578829. Photos depict the system for MY's 1937 & 1938 LaSalle- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- 1934-36 MY's will have the 2 bolt flange welded in place and you will need to report the wheel base at check out.
- 1937-40 MY's originally had a 4 bolt cast iron flange which we do not offer. Reuse your original, if possible. If you no longer have the original cast iron flange, Waldron's offer's a non-cast iron 4blt flange. Simply add it to your cart below.
-
This listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick V8 single exhaust with 2 mufflers. Photos depicts the system for 1966-67 LeSabre's stock with muffler and resonator & 68 LeSabre's (this MY did not have muffler only option from the factory).- Single exhaust system includes Y pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe. Metal-to-metal connection at the manifolds, no gaskets required.
-
This listing covers model years 1949, 1950, 1951, and 1952 Buick's 8 cyl. Photo depicts the stock exhaust for 1949 Series 70 Roadmaster's.- MY 1949 this single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1950-52 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, and 1934 American Austin's and 1938, 1939, and 1940 American Bantam's. Photo depicts system for MY's 1938-40 Bantam.- The single exhaust consists of the exhaust pipe, muffler and tailpipe.
- Exhaust pipes is 1½" OD with a 4blt flange.
- Gaskets are NA
- Please note that these tailpipes are 1" OD and will be Mild Steel (1" OD tubing is not available in either aluminized or T409 stainless steel) no matter which material you choose for the system. Also 1" clamps are not available in stainless steel so clamps needed at the tailpipe will be steel (only).
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Rebel's, Ambassador's, Marlin's, Matador's and Hornet's with the stock V8 and stock with a dual exhaust. Photo depicts the exhaust system for 1974 Matador & Ambassador (rear exhaust pipes and tailpipes vary between body styles).- This dual exhaust system consists of LS/RS exhaust pipes, LS,RS mufflers, and LS/RS tailpipes.
-
1957 Thunderbirds stock with the 292ci V8 did not come with resonators so for this model the listing is correct to the stock system. This is a resonator delete option for 1956 models (regardless of the engine) and for 1957 stock with the 312ci. Photo depicts the stock dual exhaust system for 1957 Ford Thunderbirds with the stock 292ci which is stock without resonators.- System consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
-
This listing covers MY's 1935, 1936, and 1937 Ford 1½T's trucks with the stock V8. Photo depicts the stock single exhaust for 1936 Ford 1½T trucks with the stock 221ci V8 4WD 157"WB where customer selected option 2 on the flange rotation.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. You will be ask to report the flange rotation in the check out process.
-
Waldron's Exhaust is excited to announce we are now reproducing the Fairlane K Code Arvinode dual exhaust system. Convert your 1963, 1964, or 1965 Ford Fairlane A code with 260ci, standard 289ci, or HiPo 289ci (even if it was stock with a single exhaust) to this dual exhaust system with the sought after Arvinode tone. Photo is correct to the listing.- This system consists of the LS/RS muffler/resonator assembly. If the H pipe is needed, please add it to your cart in the check out process. We will build the correct H pipe to the engine reported on your order.
- There is not an option for tips on the Fairlane Arvinode system.
-
This chrome turndown tip is cut parallel to the ground and is approximately 9" in length. Designed to fit over your tailpipe and weld in place. Available in 1½"ID, 1¾" ID, 2" ID & 2¼" ID for $20.00 (per), 2½" ID for $30.00 (per), and 3" ID for $50.00 (per). Tips generally will ship within 1 wk. -
This listing covers MY's 1955 and 1956 Packard Patrician, Caribbean, 400, Executive, Clipper Super, & Custom's with the stock V8. Excludes 1955 Packard convertibles which we do not have the needed patterns to reproduce at this time. Photo depicts the dual exhaust system with resonators for a 1956 Packard Patrician Sedan, 400 HT or Caribbean HT & convertible with the stock V8 and torsion suspension.- Dual exhaust consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes with resonators built in.
- Waldron's does not offer a "with cut pipes" option on this dual exhaust.
-
Set of 4 OEM style hangers - 2 at the muffler and 2 at the tailpipes. Kit includes OEM correct rear tail pipe clamps. This set of OEM style hangers will fit all 1964-72 GM A-Body styles. Excluding Vista Cruisers and/or Station Wagons. Muffler hangers : ALL 68-72 A body / $49 per pair Tailpipe hangers: 64-67 Cutlass & 442 (without chambered tailpipe): $34 per pair 68-9 Olds 442 (for chrome tips): $57 per pair 68-69 Cutlass (without chrome tips): $45 per pair 70-72 Olds 442: $57 per pair 70-72 dual without bumper cutouts or trumpets: $45 per pair 70-72 Chevelle dual (without resonators or chrome tips): $45 per pair 68-71 Pontiac LeMans/Tempest/GTO: $57 per pair To order individual components, please call us at 800-503-9428. Hangers generally will ship within 1 wk. -
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
-
This listing covers MY's 1957, 1958, 1959, and 1960 Dodge D100, D200, D300 or W300 stock with the stock 318ci V8. Photo is correct to the listing for all 1957-60 D100, D200, D300 & W300 with the stock 318ci and Y pipe with Option 2 flange rotation.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and OE correct short tailpipe.
- You will be asked to report which of the 2 flange rotation options is needed for your Y pipe.
- Y pipe may be NORS