- This dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2¼"OD on the exhaust pipes which reduce to 2"OD at the muffler inlets and then increases to 2¼" OD at the tailpipes.
- For MY's 1970-72, this system does not include the chrome tips but will be designed to fit up to the stock tip design.
- If the cast iron flanges are needed, add them to your cart for an additional $45.00.
- Metal-to-metal connection at the manifolds. Gaskets are not required.
-
This listing covers MY's 1966, 1967, 1968, & 1969 Pontiac Custom, GTO, Lemans, & Tempest with Ram Air or High Output, 1970 models with Ram Air, and 1971-72 models with High Output. If your MY 1966, 1967, or 1969 was stock with 4 mufflers, refer to listing 453477. For systems w/o RA or HO, refer to listing 453210. Photo depicts the stock dual exhaust system for 1967 Pontiac Lemans, Tempest, and Custom with RA or HO manifolds on the stock 400ci V8 & standard transmission (this is a resonator eliminator system for 1967 GTO's with RA or HO & STD trans). -
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Select this option for a stock 5" or 6" round muffler with a body length less than 30". The checkout process will ask questions regarding your application and muffler will be built to those specifications.
-
This listing covers MY's 1931 models 840 & 845, 1937 models 120C, 120D, 138CD, 1500, 1501, 1502 Super 8 and 1938 Super 8 Packard's. Photo depicts the system for 1937 Packard's (120C, 120CD, 138CD) stock with the 8 cyl. engine.- This single exhaust consists of the exhaust pipe, muffler, resonator w/connector pipe at inlet end (trim to fit), and tailpipe.
-
This listing covers MY's 1957, 1958, 1959, 1960 ,1961, 1962/ 1963, 1964, 1965, and 1966 Chrysler Imperials. MY 1959 - we will need to know your VIN due to mid-year change. MY's 1959-61 - we will need to know type of suspension. Photo depicts the system for 1962-66 Chrysler Imperials.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailpipes.
- When installing the system for 1957 and 1958 Imperial's (except convertibles and 4 dr. hardtops) the transmission crossmember will need to be removed in order to install the resonators.
-
This listing covers MY's 1976, 1977, 1978, 1979 & 1980 Jeep CJ-5's and CJ-7's with stock 304ci. This system was stock with a catalytic converter and the converter must in place for system to fit. If you are in need of a new direct fit catalytic converter, you may add it to your cart (for an additional $335.00) in the check out process. Photo depicts the system for 1977-78 CJ-7's with the stock 304ci (shown with the converter that we supply in place).- Single exhaust will consist of the Y pipe, muffler, and tail pipe. Stock converter sits between the Y pipe and muffler.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1945, 1947, 1948, and 1949 Dodge's with the stock 6 cyl engine. Photo depicts the system for a 1936 Dodge Coupe convertible.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1972, 1973, and 1974 Fairlane, Torino, and Ranchero's with a V8 and single exhaust. Photo depicts the stock single exhaust for a 1972 Ford Torino stock with a 400ci V8.- For the SW or Ranchero; single exhaust consist of the Y pipe, muffler, front tailpipe, and rear tailpipe. Y pipe may be NORS.
- For all other body styles: single exhaust system consists of Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1935, 1936, and 1937 Ford 1½T's trucks with the stock V8. Photo depicts the stock single exhaust for 1936 Ford 1½T trucks with the stock 221ci V8 4WD 157"WB where customer selected option 2 on the flange rotation.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. You will be ask to report the flange rotation in the check out process.
-
This listing is for the OE correct system for all 1954 Packard's with the stock resonator.- System consists of the exhaust pipe, muffler, and tailpipe with resonator built into it.
-
This listing covers model years 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, 1927, 1928, 1929, and 1930 Buick Standard and Master's with 4 cyl or 6 cyl engines, including the 1930 Marquette. For MY's 1921-27 Master's, except non-touring and/or open car's, there is a press-fit cast iron section front of the muffler that must be in place for the this stock system to fit properly. If you have the original cast iron flange, we recommend reusing it. Photo depict the system for a 1929 Buick Master with the stock 6 cyl.- Single exhaust system includes exhaust pipe, muffler and tailpipe.