- Single exhaust system consists of crossover pipe, exhaust pipe, front muffler, over-axle pipe, and rear muffler with tailpipe.
-
This listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds 88, 98, Delmont, Jetstar, and Delta's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for a 1971 Olds Custom Cruiser SW with the stock V8 (455ci).
-
This listing covers model years 1961, 1962, 1963, and 1964 Olds 98, 88, Jetstar, Dynamic, and Super's with the stock V8 and a 2 muffler single exhaust system. Photo depicts the stock single exhaust for all models (except 98's and station wagon's) with the stock V8. Photo shows cross-over, front exhaust pipe, rear exhaust pipe & muffler being NORS parts.
- Single exhaust consists of the crossover pipe, front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, and rear muffler with tailpipe.
-
This listing covers model years 1949, 1950, 1951, 1952, and 1953 Olds 88 & 98's stock with the V8. Photos depicts the system for MY's 1949-50 Olds 88's with the stock V8.
- Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe. This system requires 3 gaskets. Waldron's can help you out with a flat gasket but we do not have the Oldsmobile style gasket available.
- MY's 1952 & 1953 will need to report whether the vehicle was stock with or without power steering in the check out process.
-
This listing covers MY's 1958, 1959, and 1960 Lincoln Continental Premiere's & Capri's with the stock V8. Photo depicts the dual exhaust for all models in 1958 with the stock V8 430ci.
- Dual exhaust system consists of the cross-over pipe, LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailspouts.
-
Listing covers model years 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, and 1951 Hudson's. Photo depicts the stock single exhaust for 1950 Hudson Pacemaker & 500's with the stock 6 cyl. engine.
- For MY's 1924-47 the single exhaust system consists the exhaust pipe, muffler and tailpipe.
- For MY's 1948-51 the system consists of the front exhaust pipe, rear exhaust pipe, muffler with tailpipe.
-
This listing covers MY's 1974 Mustang's with the stock V6 171ci and 1975 Mustang's stock with the V8 302ci that were stock without catalytic converters. Photo depicts the system for a 1974 Mustang with the stock V6 171ci.
- 1974 system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. You will need to report whether there is a 6¾" or 8" ring gear on the rear axle in the check out process.
- 1975 system consists of the LS exhaust (aka extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe which will be NORS. You will need to report the build date of your 1975 Mustang in the check out process.
-
This listing covers model years 1970 (302ci, 351ci, 428ci) 1971 (351ci, 429ci, 302ci) 1972 and 1973 (351ci) Mustang's including Boss, GT, and Cobra Jet stock with a 2 muffler dual exhaust. For the OE correct system for a 1970 Mustang stock with the 429ci, refer to SKU 518740. Photo depicts the stock dual exhaust for a 1970 Mustang (non GT) with the stock 351W.
- Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS. Excludes the chrome tips.
-
This listing covers MY's 1965 and 1966 Dodge Darts stock with the 273ci V8 and 4 BBL carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo is correct to the listing.
- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.
-
Listing covers MY's 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959 Desoto's stock with a V8 and single exhaust. Excludes 1953-54 Desoto convertibles which were stock with 2 mufflers. Photo depicts the stock single exhaust for 1954 Desoto Firedome's with the stock V8 except convertibles, SW's & 8 passenger cars.
- For 1952-56 models & 1957 Firesweep this single exhaust system consists of a cross-over pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
- For 1957 Firedome & Fireflite & all 1958-59 models this single exhaust system consists of Y pipe, rear exhaust pipe, muffler and tailpipe.
- Y pipe may be NORS.
-
Waldron's Exhaust developed this unique dual exhaust system using a factory OEM exhaust system. Photo depicted is correct to the listing.
- This system consists of LS/RS exhaust pipes with stainless steel flex wrap, LS/RS resonator pipes, LS/RS over-axle pipes with balance tube, LS/RS mufflers and LS/RS tailpipes.
- This system starts out at 2"OD on the exhaust pipes which reduce to 1¾"OD at the resonator inlets and then remains at 1¾"OD throughout the remaining of the system.
-
This listing covers model years 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Imperials and is a resonator eliminator option (as these were stock w/resonators). Photo depicts the stock dual exhaust for all 1964-66 Chrysler Imperials with the stock V8.
- For MY's 1957-58 convertible dual system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS resonator eliminator pipes, and LS/RS tailpipes.
- All other MY's (and body styles in 57-58) consists of LS/RS exhaust pipe, LS/RS resonator eliminator pipes, LS/RS connector pipes, LS/RS muffler, and LS/RS tailpipes.
- MY 1959 Imperials will need to report whether it is an early or late model year.
- MY's 1959-61 will be asked to report type of suspension in the check out process.
-
This listing covers model years 1954, 1955, and 1956 New Yorker, 300 and Windsor's stock with a V8 and dual exhaust. Photo depicts the stock dual exhaust for 1954 New Yorker's.
- For 1954-55 model years the dual exhaust system consists of LS/RS front exhaust pipe, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
- Model year 1956 consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1971, 1972, 1973, and 1974 Vega's with the stock 4 cyl. Photo depicts the system for 1974 Vega's. MY's 1971-73 require the same exhaust pipe but the system varies after that.
- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, single in/single out transverse muffler, and tailpipe.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, and 1981 Camaro's with the stock V8 single exhaust with 2 tailpipes. Photo depicts the system for MY's 1977-79 Camaro's stock with the 305ci or 350ci V8.
- Complete cat-back exhaust system begins behind the catalytic converter and consists of the rear exhaust pipe, muffler, and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevelle, Malibu and El Camino's with a stock 6 cyl. Photo depicts the stock single exhaust for 1968 Chevy 4dr Chevelle's, 300's, and Malibu's with the stock 6cyl (2drs take a shorter exhaust pipe).
- Single exhaust system consists of exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1965, 1966, and 1967 Bel Air, Impala, Biscayne, Super Sport, and Caprice's with the stock V8. MY 1967; this is OE correct for all engines. MY's 65-66; this is OE correct for the 283ci and a resonator eliminator option for the 327ci & 396ci (which were stock with resonator). Photo depicts the stock single exhaust system for 1965-66 Chevy Full Size with the stock 283ci V8 (stock without a resonator).
- Single exhaust system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
- For MY's 1965-67 stock with the 283ci; we will need you to report the desired tailpipe exit in the check out process.
-
This listing covers model years 1930, 1931, 1932 & 1933 Cadillac's stock with dual exhaust and their respective stock V12 or V16. Photo depicts the stock dual exhaust for 1931-33 Cadillac Models 370A, 370B & 370C with the stock V12.
- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Exhaust pipes originally used cast iron flanges. We do not have them available and no flanges will come with the system.
- MY 1930 exhaust pipe is stock 2¼" and reduces to 1¾" at the muffler outlets.
- MY's 1931-32 exhaust pipe is stock at 2½" and reduces to 1 7/8" at the muffler outlets.
-
This listing covers 1961, 1962 & 1963 Skylark's and Special's stock with the stock V8 & 2bbl (for MY 1963 the type of carburetor does not matter) carburetor along with 1962 & 1963 Special's stock with a V6. Refer to listing 568813 for the 1961-62 4bbl set-up. Photo depicts the single exhaust system for 1962 Buick Specials with the stock 215ci V8 and 2bbl carburetor.
- System contains Y pipe, rear exhaust pipe (our pattern pipe is 2 pcs vs the original 1 pc. long pipe), transverse muffler, tailpipe. Metal-to-metal connection at the manifolds, no gaskets required. Y pipe may be NORS.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron's Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
-
This listing covers model year 1962, 1963, and 1964 LeSabre, Wildcat, and Electra's with stock V8 and dual exhaust. Photo depicts the system for a 1963 Buick Wildcat / LeSabre. Pipes will vary depending on transmission and body style.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS front connector pipes, LS/RS rear connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gaskets required at the manifolds. These systems DO require gaskets at the muffler inlets & may be added to your cart.
-
This listing covers model years 1960 and 1961 Buick LeSabre, Invicta, Electra and Electra 225 with V8 dual exhaust and a transverse muffler. Photo depicts the stock dual exhaust for 1961 Buick Invicta's & LeSabre's with the stock V8.
- The dual exhaust consists of the LS/RS front exhaust pipes (flange connected to the rear exhaust pipes), LS/RS rear exhaust pipes (flange connected to the transverse muffler inlets), dual in/dual out transverse muffler, and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gasket required.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, and 1946 Buick with the straight 8 and dual carburetors. This listing is for MY's 1941-46 with the dual carburetor set up. If your 1941-46 Buick was stock with a single carburetor set-up, refer to listing 568791. Photo depicts the system for a 1941 Buick Super with dual carb set up.
- System consists of extension pipe, front exhaust pipe (AKA Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1957, 1958, 1959, 1960 Rambler American, 1961, 1962, 1963, 1964 Rambler, American & Classic, 1965 & 1966 American, Classic along with Nash Marlin & Ambassador stock with the OHV 6 cyl. Photo depicts the stock single exhaust for 1964 AMC American's stock with the OHV 6cyl 196ci (except convertibles & station wagons).
- For MY's 1957-63 (exc. 1962-63 convertibles) this single exhaust system consists of the exhaust pipe, muffler, and tailpipe. 1962-63 convertibles take a front exhaust pipe, rear exhaust pipe, muffler, and tail pipe.
- For MY's 1964-66 these single exhaust systems vary between models and body styles, with some set-ups having a transverse muffler.
- MY's 1957-60 all body styles except station wagon's need to report whether the car was stock with or without a wheel carrier.
-
This listing covers model years 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965 & 1966 American's with stock the L Head cyl. Photo depicts the system for 1965-66 American's with the stock 6 cyl L head.
- Single exhaust system consists of an exhaust pipe, muffler and tailpipe.
- Waldron's does not provide the clamps needed to attach the manifold pipe to the engine nor do we have the needed gasket available. Give us a call for contacts, if needed.
-
This listing covers 1966 & 1967 Pontiac Leman's & Tempest's stock with the OHC 230ci 6cyl and a 4BBL carburetor. If you would prefer to eliminate the resonator, refer to SKU 453213. Photo depicts the stock single exhaust for 1966-67 Leman's & Tempest's with the stock 230ci 6cyl and the 4bbl carb.
- This single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, connector pipe, and resonator with tailspout.
-
This listing covers 1936 & 1937 GMC ½T trucks with the stock Olds 213ci 6 cyl. Photo shows the stock single exhaust system for 1936-37 GMC ½T's with the Olds 213ci where the muffler sits outside the frame rail.
- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- Waldron's does not have the gaskets available for this system.
- In the ordering process, you will be asked to report where the muffler sits on your system (inside or outside of the frame rail),
-
Listing covers 1975, 1976, & 1977 Ford Maverick's with the stock 6 cyl or V8 and begins behind the converter. Photo depicts the stock cat-back single exhaust for 1977 Ford Mavericks with the stock 250ci 6cyl with the 12" catalytic converter.
- Cat-back system consists of the rear exhaust pipe, resonator, connector pipe, and muffler w/tail spout.
- MY 1977 will need to report stock catalytic converter body length (7¼" or 12") in the check out process.
- If you are in need of the pipes forward of the converter and/or the converter, please give us a call for availability and pricing.
-
Listing covers MY's 1970. 1971, 1972, 1973, & 1974 Maverick's with the stock 6 cyl. and 1 muffler. If your 1973-74 Maverick was stock with 2 mufflers, refer to 518892. Photo depicts the stock single exhaust for 1971-72 Ford Maverick 2dr. models with the stock 170ci or 200ci 6cyl.
- System consists of the front exhaust pipe, center exhaust pipe, rear exhaust pipe, and muffler w/tail spout.
-
This listing covers MY's 1952 (still referred to as F1, F2, & F3), 1953, 1954, 1955, and 1956 Ford F100, F250 & F350's stock with a 6 cyl. Photo depicts the system for 1954-55 F100, F250 or F350 with a stock 6 cyl.
- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1972, 1973, and 1974 Fairlane, Torino, and Ranchero's with a V8 and single exhaust. Photo depicts the stock single exhaust for a 1972 Ford Torino stock with a 400ci V8.
- For the SW or Ranchero; single exhaust consist of the Y pipe, muffler, front tailpipe, and rear tailpipe. Y pipe may be NORS.
- For all other body styles: single exhaust system consists of Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, and 1951 Fords stock with a 4 cyl or 6 cyl. Photo depicts the stock single exhaust for 1942-46 Ford models 2GA & 6 GA (Special Deluxe & Super Deluxe) with the stock 90HP 6cyl.
- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1931 models 840 & 845, 1937 models 120C, 120D, 138CD, 1500, 1501, 1502 Super 8 and 1938 Super 8 Packard's. Photo depicts the system for 1937 Packard's (120C, 120CD, 138CD) stock with the 8 cyl. engine.
- This single exhaust consists of the exhaust pipe, muffler, resonator w/connector pipe at inlet end (trim to fit), and tailpipe.