- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS over-axle pipe, LS/RS mufflers and LS/RS tips in the same material. We do not offer the stock chrome tips.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Barracuda's with the stock V8340ci, 383ci (1971 last yr.) , 340ci and 360ci and dual exhaust with resonators and mufflers. Excludes 1970-71 Barracuda's with a 426ci (stock w/H pipe), for that system refer to 438535. Photo depicts the stock dual exhaust for 1970-71 Barracuda Cuda's with the stock 383ci V8. -
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 Signet, Valiant, and Barracuda's with the stock V8 273ci or 318ci and single exhaust. Photo depicts the stock single exhaust for 1964-66 Plymouth Mid Size models with the stock 273ci or 318ci with a 2bbl carburetor.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1964-69 do NOT require gaskets at the manifold.
- MY's 1970-71 DO require gaskets at the manifold.
-
For Packard MY's 1955 and 1956 Patrician, Caribbean's, Executive, 400, Clipper Super & Custom's, this is a resonator eliminator option (for the stock system refer to listing 454498). Photo depicts the dual system for 1956 Executive, Clipper Super, & Custom's with a 352ci, torsion bar suspension and the stock resonator eliminated.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS muffler assembly, and LS/RS tailpipes.
- Our patterns for MY 1956 Clipper Super's, Custom's & Executive's are for models with torsion bar suspension.
- Shipping full length is the only option under this listing.
-
This listing covers model years 1967, 1968, 1969, 1970, and 1971, Fairlane, Torino, and Ranchero's with a V8 and single exhaust. Photo depicts the stock single exhaust system for 1967 Ford Ranchero's & Station Wagon's with the stock V8 289ci.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1963, 1964, & 1965 Fairlane A codes and K codes with the stock V8. Photo depicted is correct to the listing however H pipes vary between engines.- This dual exhaust system consists of the H pipe, LS/RS muffler assembly's, and LS/RS resonator with turndowns.
-
This listing covers model years 1962, 1963, 1964, and 1965 Fairlane's stock with the V8 and single exhaust. If your 1963 or 1964 Fairlane was stock with a 4bbl carburetor, refer to SKU 518897. Photo is correct to the listing & reflects a system where the customer opted to save on shipping and had the rear exhaust pipe cut. Parts vary between MY's, engine, and carburetor set up.- Single exhaust system consists of the Y pipe, rear exhaust pipe, and muffler with turndown. Y pipe may be NORS.
- MY 1962 with the 221ci will need to report whether the system was stock at 1¾" (Y pipe is flared to 2" at the manifold and runs 1¾" throughout) or 2" (throughout) in the check out process. 1963-65 models are all 2" throughout.
- MY 1963 will need to report Early or Late model; early MY '63 took a muffler with a 25" body length while the late model year system took a muffler with a 27" body length.
-
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Mustangs with a V8 and allows owners of A Code's & some K Code's to update their Mustang's to the unique sound of the Arvinode dual exhaust. For 1965-66 K Code's this is the stock set up. This concours correct Arvinode system has the chamber tube that runs along the top of the muffler/resonator and gives you the true original Arvinode sound. Photo is correct to the listing.- The Concours Arvinode dual exhaust system starts behind the stock H pipe and includes the LS/RS connector (AKA rear exhaust) pipes, LS/RS wave-tuned front mufflers with rectangular external tubes, LS/RS over-axle pipes, LS/RS resonators with turndowns or GT exit.
- These parts were welded into LS and RS assembly's from the factory and connected with clamps to the outlet end of the H pipe.
- If the H pipe is needed, you may add to your cart in the check out process.
- Let us know if you need the GT exit or turndowns in the check out process.
-
This listing covers MY's 1956 with either the 292ci or the 312vi V8 and 1957 Ford Thunderbirds with the 312ci V8. The 292ci did not come stock with resonators. Refer to listing 518899 for a '57 T-bird with a 292ci or if you want to delete the resonator. Photos depicts the exhaust pipes and mufflers for 1956 and 1957 Thunderbirds, the front and rear tailpipes vary depending on engine and transmission.- This dual exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS tailpipes.
-
This listing covers model years 1963, 1964, 1965, 1966, 1967, 1968, 1969 and 1970 Falcon's and 1963-66 Ranchero's with the stock V8 and single exhaust. If you have a 1967-70 Ranchero; refer to SKU 518767 Photo depict the system for a 1963 Falcon Station Wagon with the stock 260ci.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1966 and 1967 Ford 7-Liter's stock with the 428ci V8. If you have a 1966 427ci or a 1967 427ci in your Ford 7-Litre (instead of the stock 428ci) we can help you put a 7-Litre system on your Ford. Photo depicts the system for MY 1966 7 Litre.- Ford 7-Liter exhaust system consists of the H pipe, LS/RS front glasspacks, and LS/RS rear tailpipes w/glasspacks. Tailpipes include welded hanger attachment brackets and angle-cut turn-downs as shown.
- Pipe diameter of the stock 428ci is 2"OD through out. The 427ci H pipe starts out at 2½" OD but quickly reduces to 2" and remains 2" through out.
- The body diameter of all 4 glasspacks will be 3½" OD if order an aluminized steel system and 3" OD if ordering a T409 stainless steel system.
-
This listing covers model years 1949, 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ford Mainline, Customline, and Crestline's stock with the flathead V8. Photo depicts the system for MY's 1952-53 Ford's (except convertibles, SW's & sedan delivery's) with the tailpipe built in 2 sections for shipping purposes.- Single exhaust consists of the crossover pipe (MY's 1949-53 pipes crosses under the engine / MY's 1954-56 pipe crosses over the engine), exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, and 1961 Desoto's stock with a V8 and dual exhaust. Excludes 1955 Desoto convertibles which were stock with a single exhaust. This listing does cover 1956 Desoto convertibles which were stock with mufflers only (no resonators). For MY's 1957-61 convertibles this would be a resonator delete system. If you would like to have the true OE system for your 1957-61 convertible, please refer to 538704 which has mufflers and resonators. Photo depicts the dual exhaust for 1958-59 Firesweep, Firedome, and Fireflite's except convertibles and station wagons.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 New Yorker, Newport, Windsor and 300's with a V8 and stock with a single exhaust with both muffler and resonator. Excludes 1961 Newport & Windsor, 1962 Newport & 300's, and 1971 w/360ci, 1972, 1973 w/400ci Newport's which were stock with 1 muffler. Photo depicts the system for 1974 New Yorkers and Newport's stock with the 440ci.- Single exhaust consists of Y pipe, rear exhaust pipe, front muffler, connector pipe, and rear muffler with tailpipe.
-
This listing covers model years 1957, 1958, and 1959 New Yorker, Saratoga, 300, and Windsor with the stock V8 and dual exhaust. Excludes convertibles which were stock with 2 mufflers and 2 resonators. Photo depicts the system for 1957-58 Chrysler 300's.- Dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1977, 1978, 1979, 1980, and 1981 Z28's stock with a dual exhaust. Photo depicts the cat-back system for 1977-79 Z28's with the stock V8.- Complete dual cat-back exhaust system begins behind the catalytic converter and consists of the Y pipe, LS/RS mufflers, and LS/RS tailpipes. Y pipe may be NORS. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
Photo is correct to the listing. If you aren't concerned about staying true to the stock system and would like to eliminate the cross-over pipe & Y pipes or if you have late model motor mounts; refer to 588605.- This listing is for the original stock design with the early model motor mount and consists of LS/RS crossover pipes, LS/RS Y pipes, LS/RS mufflers and LS/RS tailpipes.
- It has been brought to our attention that vehicles using the late model motor mounts will have fitment issues with the cross-over pipes and we suggest that you order the alternative design or be prepared to make modifications.
-
This listing covers model years 1971, 1972, 1973, and 1974 Fleetwood Eldorado's stock with a single exhaust. Photo depicted is correct to the listing.- System consists of LS/RS front exhaust pipes, rear exhaust (Y) pipe, front muffler, connector pipe, rear muffler and 1 short tailpipe.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Cadillac's. The cross-over portion of this system is part of the manifold. Photo depicts the system for a 1941 Fleetwood.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- If you do not have the original cast iron 4 bolt flange, you may add a non-cast iron 4blt flange to the order.
-
This listing covers model years 1934, 1935, 1936, 1937, 1938, 1939, and 1940 LaSalle's. For MY 1936 this is a resonator eliminator option as all 1936 LaSalle's were stock with 2 mufflers. For the OE correct system for 1936 refer to 578829. Photos depict the system for MY's 1937 & 1938 LaSalle- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- 1934-36 MY's will have the 2 bolt flange welded in place and you will need to report the wheel base at check out.
- 1937-40 MY's originally had a 4 bolt cast iron flange which we do not offer. Reuse your original, if possible. If you no longer have the original cast iron flange, Waldron's offer's a non-cast iron 4blt flange. Simply add it to your cart below.
-
This listing covers model years 1967, 1968, and 1969 AMC American/Rambler's with a straight 6 cyl. Photo depicts the stock single exhaust for 1967-68 AMC Rambler American's HT's & Sedan's with the 199ci 6cyl. Convertibles & SW require a different system, as does the 232ci 6cyl.- The single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 for Rebel, Ambassador, Classic, Marlin, American, Gremlin, Hornet, Javelin and AMX's with V8 and single exhaust. Photo depicts the system for a 1965 AMC Rambler Ambassador with the stock 327ci.- For MY's 1959-62 this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), muffler and tailpipe.
- For MY's 1963-64 3 Seat Station Wagons this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), rear exhaust pipe, muffler and tailpipe.
- For MY's 1963-74 (except the 3 Seat SW) this single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- Some Y pipes may be NORS.
-
This listing covers model years 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, 1927, 1928, 1929, and 1930 Buick Standard and Master's with 4 cyl or 6 cyl engines, including the 1930 Marquette. For MY's 1921-27 Master's, except non-touring and/or open car's, there is a press-fit cast iron section front of the muffler that must be in place for the this stock system to fit properly. If you have the original cast iron flange, we recommend reusing it. Photo depict the system for a 1929 Buick Master with the stock 6 cyl.- Single exhaust system includes exhaust pipe, muffler and tailpipe.
-
1957 Thunderbirds stock with the 292ci V8 did not come with resonators so for this model the listing is correct to the stock system. This is a resonator delete option for 1956 models (regardless of the engine) and for 1957 stock with the 312ci.- System consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
-
This listing is for 1975 CJ-5's and CJ-6's with the stock V8 without a converter (not for CJ's that were stock with converter). Photo depicts the single exhaust system offered stock without a catalytic converter for 1975 CJ5's with the stock V8 304ci.- This system consist of the Y pipe, rear exhaust pipe, muffler, and tail pipe.
-
Waldron's Exhaust reproduces this OE correct muffler hanger. This muffler hanger is correct to:- 1967 Ford Fairlane's (except 289ci & Junior Jewel)
- 1968 Ford Falcon (except for S.W.)
- 1967 Mercury Comet's (except Junior Jewel)
-
This listing covers MY's 1966, 1967, 1968, & 1969 Pontiac Custom, GTO, Lemans, & Tempest with Ram Air or High Output, 1970 models with Ram Air, and 1971-72 models with High Output. If your MY 1966, 1967, or 1969 was stock with 4 mufflers, refer to listing 453477. For systems w/o RA or HO, refer to listing 453210. Photo depicts the stock dual exhaust system for 1967 Pontiac Lemans, Tempest, and Custom with RA or HO manifolds on the stock 400ci V8 & standard transmission (this is a resonator eliminator system for 1967 GTO's with RA or HO & STD trans).- This dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2¼"OD on the exhaust pipes which reduce to 2"OD at the muffler inlets and then increases to 2¼" OD at the tailpipes.
- For MY's 1970-72, this system does not include the chrome tips but will be designed to fit up to the stock tip design.
- If the cast iron flanges are needed, add them to your cart for an additional $45.00.
- Metal-to-metal connection at the manifolds. Gaskets are not required.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Cougar's & GT's with their respective stock V8: 302ci, 390ci, 427ci, 428ci, 351ci, 429ci, or 460ci. Photo depicts the system for a 1969 Cougar with the stock 351W.- For MY's 1968-73: This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
- For MY 1974: This dual exhaust consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1962, 1963 Mercury Meteor's & 1963, 1964, & 1965 Comet (including Cyclone and Caliente's) with their respective stock V8; 221ci, 260ci, or 289ci. 1965 . Photo depicts the system for 1965 Comet's.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailspout. Y pipe may be NORS.
- Comet's with the 4bbl carburetor were stock from the factory with a resonator built into the tailpipe. Waldron's does not have the needed pattern for the 4bbl set-up, so this listing is a resonator delete system.
-
This listing covers MY's 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Meteor (MY's 1962-63 only) & Comet's, including the Cyclone, Caliente and GT's, with their respective stock 144ci, 170ci, 200ci, and in 1969, the 250ci 6 cyl engine. Photo depicts the system for MY's 1963-65 Comet's with the stock 200ci.- MY's 1960-65: system consists of the front exhaust pipe, rear exhaust pipe, and muffler w/tailspout.
- MY 1966: system consists of the front exhaust pipe, rear exhaust pipe (turns in board), and transverse muffler w/tailspout.
- MY's 1967 & 1969-70: system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY 1968: system consists of the front exhaust pipe, rear exhaust pipe w/muffler, and tailpipe.
- MY's 1971-74: system consists of the front exhaust pipe, center exhaust pipe, rear exhaust pipe, and muffler w/tailspout.
-
This listing covers MY's 1965, 1966, 1967, 1968, 1969, and 1970 Mercury Monterey's, Commuter's, Colony Park's, & Montclair with their respective stock V8, 390ci, 427ci, 410ci, and 428ci. Excludes Station Wagons which are available with a single exhaust only. The 429ci is not listed due to lack of pattern on the H pipe. Aftermarket companies didn't reproduce. We can help you with mufflers and tailpipes, contact us for pricing. Photo depicts the system for 1968 Marquis', Monterey's, Montclair's, and Parklane's with the stock 428ci.- MY's 1965-68: System consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
- MY 1965 Station Wagon: System consists of the H pipe, LS/RS mufflers, LS front, center & rear exhaust pipes, and RS front & rear (that connects to the LS) tailpipes.
- MY 1969: System consists of the H pipe, LS/RS mufflers, LS/RS front and rear tailpipes.
- H pipe may be NORS
-
Photo is correct to the listing.- 1962 & 1963 Olds Jetfire Turbo 2nd Design single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, connector pipe (AKA over-axle pipe), single in/dual out transverse muffler, and LS/RS tailpipes.
- Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
-
This listing covers MY's 1960, 1961, 1962, 1963, 1964, 1965, and 1966 GMC ½T 1000, ¾T 1500, and 1T 2500's with the stock V6 305ci with 2WD. Excludes 4WD's. Photo depicts the stock single exhaust for 1963 GMC with the stock 305ci V6 & 2WD (except 7' panel truck & Suburban which require a different tailpipe).- Single exhaust system consists of cross-over pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 GMC 1½T's with the stock 6 cyl. Photo depicts the single exhaust system for 1955-58 GMC truck models 100-24, 150-24, 250-24 & PM250-24 with the stock 6 cyl- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Flange is not included with this exhaust pipe. Reuse original cast iron flange (if possible).
-
This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 GMC's with the stock 6 cyl 228ci or 248ci.
- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- This exhaust pipe will not come with the cast iron flange. You will need to reuse your flange. Nor do we have a gasket available.
- The OE muffler hanger, available in checkout, is for MY's 1941-53. It is not OE correct for MY's 1939-40. Currently NA
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, and 1969 Dodge D100, W100, D200, W200, D300, & W300's, 1970 & 1971 D100, D200, D300 & W300's stock with the V8 except the 383ci as the Y pipe for the 383ci has never been reproduced for this MY's. Give us a call to see what we can do for you at 800-503-9428. Photo depicts the stock single exhaust for 1967-68 D100 ½T's & D200 ¾T's Regular Cab with 127" WB and the stock 318ci V8- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
- For 1961-64 models, this system is for conventional cabs only.
- 1965-68 models will be asked to report the serial number. We will need to know if it falls before or after SN 166800. The difference being that early models require flat gaskets at the manifold while the later models are a metal-to-metal connection at the manifold.
- 1969-71 models will be asked to report whether the truck is stock with or without a cowl.
-
This listing covers model years 1925, 1926, 1927, 1928, 1929, 1930, and 1931 Whippet's 93, 96, 93A, 98, 96A, and 98A's with the stock 4 cyl or the stock 6 cyl engine. Photo depicts the system for a 1930 Whippet 96A.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. During the check out process you will need to report the ID of the manifold.