- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- MY''s 1972-73 will need to tell us what size tailpipe your CJ was stock with in the check out process.
- MY 1975 will need to be specific about 3 or 4 speed transmission in the check out process.
- MY 1978 will need to report with or without Power Take Off in the check out process
-
This listing covers MY's 1972-73 CJ5, CJ6, DJ5, & DJ6, 1974-75 CJ5 & CJ6, 1976-78 CJ5 & CJ7. Photo depicts the stock single exhaust for 1972-73 CJ5's and DJ5's with the stock 232ci 6cyl. and 2" tailpipe. -
Listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T Trucks with the stock flathead V8. Convert your flathead Ford to dual exhaust with Waldron's exclusive Dual Conversion kits! Complete kit bolts on to the stock manifolds. Not available for 1933-34, 1942-47 or 1953 MY's.- Dual conversion kit consists of the exhaust pipes, custom-built glasspacks, tailpipes, blocker plate, gaskets and clamps. Gaskets & steel clamps are included. After 1949, the RS exhaust requires blocking plate which will be included in the system. Universal hangers can be added to the cart, if needed. Period specific hangers are N/A.
- The system goes through existing holes in the crossmembers. LH exhaust pipe starts at 1 ½”OD and opens to 2”OD at the glasspack inlet. RH exhaust pipe 2” OD throughout. Tailpipes are either 1 5/8” or 1 ¾” depending on the material selected & MY.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. Additional cost of $115.00 for aluminized steel or $230.00 for T409 SS.
-
This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Ford F1, F2, and F3 stock with the flathead V8 and single exhaust. This listing is NOT for Mercury trucks. Photo depicts the crossover pipe and Y pipe for 1942-52 F1, F2, & F3's with V8, the muffler and tailpipes vary.- Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
-
This listing covers model years 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Ford F100, F250, and F350's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for 1954-56 F100, F250, & F350's with the stock V8.- Single exhaust system consists of the 2 pc. crossover pipe, exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971,1972, 1973, 1974, and 1975 Scout's stock with either the 4 cyl or 6 cyl engine. This listing EXCLUDES 1970 Scouts with 232ci with manifold exit on the driver side. Photo depicts the system for Scouts after chassis FC60474 which has the muffler after the rear axle.- For Scouts up to chassis FC60474 and/or models with the muffler forward of the rear axle, this single exhaust system consists of an exhaust pipe, muffler, and tailpipe, with the tail pipe exiting out the passenger side.
- For Scouts after chassis FC60474 and/or models with the muffler after the rear axle, this single exhaust consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe, with the tail pipe exiting out the driver side.
- MY's 1961-70 do not require a gasket. MY's 1971-75 will require a gasket.
-
This listing covers MY's 1949, 1950, 1951, 1953, and 1954 Mercury's with the stock flathead V8. Photo depicts the system for MY's 1949-51 Mercury's with the stock engine.- This single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.
- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers MY's 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, & 1993 Mercury Marquis' ('80-82), Grand Marquis' & Colony Park's with the respective stock MY V8's: 302ci, 351ci, & 4.6L. Photo depicts the dual cat-back exhaust system for 1990-91 Marquis' with the stock 302ci.- Dual exhaust starts behind the LS/RS catalytic converters (which must be in place) and consists of a NORS H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Cougar's & GT's with their respective stock V8: 302ci, 390ci, 427ci, 428ci, 351ci, 429ci, or 460ci. Photo depicts the system for a 1969 Cougar with the stock 351W.- For MY's 1968-73: This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
- For MY 1974: This dual exhaust consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 & 1980 Scouts with the stock V8 304ci or 345ci and single exhaust. Photo depict the system for MY's 1973-77 Scouts with the 108"WB and the stock 304ci or 345ci V8 (tail pipes vary between wheelbases).- For MY's 1971-78 this single exhaust system consists of the LS/RS front exhaust pipes, Y pipe (AKA rear exhaust pipe), muffler, and tailpipe.
- For MY's 1979-80 this single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe and rear tailpipe. 1979 & 1980 Scouts were stock with a catalytic converter. If you would like to keep your system OE correct with the converter, you may add it to your cart below for an additional $335.00.
- Y pipe may be NORS
-
This listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Ford's with their respective stock flathead V8. This listing is for passenger cars. If you have a Ford truck, you will need to look under the truck listings. Photos depicts the single exhaust system for a 1939 Ford Coupe without the heat exchanger (where customer opted to have tailpipes cut to reduce the cost of shipping).- For MY's 1935-36 & 1941-48 this single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
- For MY's 1937-40: If your 1937-40 Ford has the heat exchanger & you intend to reuse it; the system will consist of a cross-over pipe, exhaust pipe, muffler & tailpipe. If your 1937-40 doesn't have the heat exchanger or if it does have it but it is not reusable; the system will consist the 2 pc. Y pipe (AKA cross-over & Y pipe), muffler & tailpipe. You will be asked to report which setup you require in the check out process.
-
This listing covers MY's 1966, 1967, 1968, & 1969 Pontiac Custom, GTO, Lemans, & Tempest with Ram Air or High Output, 1970 models with Ram Air, and 1971-72 models with High Output. If your MY 1966, 1967, or 1969 was stock with 4 mufflers, refer to listing 453477. For systems w/o RA or HO, refer to listing 453210. Photo depicts the stock dual exhaust system for 1967 Pontiac Lemans, Tempest, and Custom with RA or HO manifolds on the stock 400ci V8 & standard transmission (this is a resonator eliminator system for 1967 GTO's with RA or HO & STD trans).- This dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2¼"OD on the exhaust pipes which reduce to 2"OD at the muffler inlets and then increases to 2¼" OD at the tailpipes.
- For MY's 1970-72, this system does not include the chrome tips but will be designed to fit up to the stock tip design.
- If the cast iron flanges are needed, add them to your cart for an additional $45.00.
- Metal-to-metal connection at the manifolds. Gaskets are not required.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Select this option for a stock 5" or 6" round muffler with a body length less than 30". The checkout process will ask questions regarding your application and muffler will be built to those specifications.
-
This listing covers MY's 1931 models 840 & 845, 1937 models 120C, 120D, 138CD, 1500, 1501, 1502 Super 8 and 1938 Super 8 Packard's. Photo depicts the system for 1937 Packard's (120C, 120CD, 138CD) stock with the 8 cyl. engine.- This single exhaust consists of the exhaust pipe, muffler, resonator w/connector pipe at inlet end (trim to fit), and tailpipe.
-
This listing covers MY's 1957, 1958, 1959, 1960 ,1961, 1962/ 1963, 1964, 1965, and 1966 Chrysler Imperials. MY 1959 - we will need to know your VIN due to mid-year change. MY's 1959-61 - we will need to know type of suspension. Photo depicts the system for 1962-66 Chrysler Imperials.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailpipes.
- When installing the system for 1957 and 1958 Imperial's (except convertibles and 4 dr. hardtops) the transmission crossmember will need to be removed in order to install the resonators.
-
This listing covers MY's 1976, 1977, 1978, 1979 & 1980 Jeep CJ-5's and CJ-7's with stock 304ci. This system was stock with a catalytic converter and the converter must in place for system to fit. If you are in need of a new direct fit catalytic converter, you may add it to your cart (for an additional $335.00) in the check out process. Photo depicts the system for 1977-78 CJ-7's with the stock 304ci (shown with the converter that we supply in place).- Single exhaust will consist of the Y pipe, muffler, and tail pipe. Stock converter sits between the Y pipe and muffler.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1945, 1947, 1948, and 1949 Dodge's with the stock 6 cyl engine. Photo depicts the system for a 1936 Dodge Coupe convertible.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1972, 1973, and 1974 Fairlane, Torino, and Ranchero's with a V8 and single exhaust. Photo depicts the stock single exhaust for a 1972 Ford Torino stock with a 400ci V8.- For the SW or Ranchero; single exhaust consist of the Y pipe, muffler, front tailpipe, and rear tailpipe. Y pipe may be NORS.
- For all other body styles: single exhaust system consists of Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1935, 1936, and 1937 Ford 1½T's trucks with the stock V8. Photo depicts the stock single exhaust for 1936 Ford 1½T trucks with the stock 221ci V8 4WD 157"WB where customer selected option 2 on the flange rotation.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. You will be ask to report the flange rotation in the check out process.
-
This listing is for the OE correct system for all 1954 Packard's with the stock resonator.- System consists of the exhaust pipe, muffler, and tailpipe with resonator built into it.