- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe with resonator.
-
This listing covers model years 1968, 1969, and 1970 Chevy BelAir, Biscayne, Impala, Caprice with V8 and single exhaust with muffler and resonator. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. -
This listing covers model years 1965 and 1966 BelAir, Impala, Biscayne, Caprice, and Super Sport's with the stock 327ci or 396ci. Both of these engines where stock with muffler & resonator. The 283ci engine was stock w/1 muffler (refer to 588617).- Single exhaust consists of the Y pipe, muffler, and tailpipe with bullet style resonator (oval style is NA).
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Eldorado's. Photo depicts the cat-back system for 1975-78 Fleetwood Eldorado's.- Cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and short tailpipe. If converter and/or pipes off the manifold are needed, please give us a call for pricing and availability.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Seville's stock with single exhaust. Excludes diesel engines. Photos depicts the cat-back system for a 1976 Seville.- This single cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe. LS/RS front exhaust pipes & converter not included. For availability and pricing, please give us a call.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Fleetwood 75 and Commercial Chassis V8 with single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and short tailpipe.
-
This listing covers model years 1968, 1969, and 1970 Cadillac Calais, Deville, Fleetwood, and Commercial Chassis' with V8 and stock single exhaust. Photos depicts the system for 1968 Calais' and Deville's.- Single exhaust consists of Y pipe, rear exhaust pipe, muffler, connector pipe, resonator and short tailpipe.
-
This listing covers model years 1965, 1966, and 1967 Cadillac Calais, Deville, Fleetwood, and Commercial Chassis with V8 and single exhausts. Photo depicts the system a 1966 Cadillac. The rear exhaust pipe varies between models.- Single exhaust system contains front (Y) exhaust pipe, center exhaust pipe w/ long *resonator, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1961, 1962, 1963, and 1964 Cadillac V8 with single exhaust. Photos depicts 1964 Cadillac's except 75 Fleetwood's and Commercial Chassis.- This single exhaust system consists of the Y pipe, muffler, front connector pipe, rear connector pipe, resonator and tailspout.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 full size Buick's with diesel engines and a 2 muffler single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This single cat-back exhaust system consists of LS/RS front exhaust pipes, center (Y) exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, and 1969 Skylark Sport Wagon's.
- System consists of Y pipe, rear exhaust pipe, muffler, connector pipe, transverse muffler and tailpipe. Metal-to-metal connection at the manifolds, no gaskets required.
-
This listing covers model years 1955 and 1956 Nash Ambassador's with a V8. Image is a copy of the systems schematics.- This single exhaust system consists of the crossover pipe, Y pipe, muffler, connector pipe, and resonator with tailpipe.
-
This listing cover MY's 1953, 1954, 1955, & 1956 Ambassadors with the dual jet carburetor and 1954 & 1955 Statesman stock with muffler and resonator. Images are copies for the system schematics.- For MY's 1953-56 Ambassador's stock with the dual jet carb, the single exhaust system consists of the exhaust pipe, muffler, connector pipe, and resonator w/tailspout
- For MY's 1954-55 Statesmen the single exhaust system consist of the exhaust pipe, muffler, front tailpipe with resonator built in, and rear tailpipe.
-
This listing covers model years 1932 and 1933 Franklin's with the stock 12 cyl. engine. For 1933 Olympics', models 18 or 18B, refer to listing 453478.
- Single exhaust consists of the cross-over pipe, exhaust pipe, muffler and tailpipe.
-
- This dual exhaust system consists of the crossover pipe, LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
- This single exhaust system consists of the exhaust pipe (w/2 bolt flange), front muffler, connector pipe, and tailpipe with rear muffler built into the inlet end.
-
This listing covers MY's 1966, 1967, 1968, 1969, 1970, and 1971 Jeep CJ-6, CJ-6A, & DJ6 with the stock V6 225ci engine. Photo depicts the system for 1966-71 CJ-5, CJ-5A, & DJ-5's with the stock V6 225ci. The rear exhaust pipe is longer on the CJ-6's.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing is for MY 1979 Mustangs with their respective stock 6 cyl or 8 cyl engines; 171ci, 200ci, or 302ci.
- This single cat-back exhaust starts behind the converter and consists of the rear exhaust pipe, front muffler, connector pipe, and rear muffler w/tailspout. If the front Y pipe and/or converter are need, please give us a call for pricing and availability.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, and 1969 Dodge D100, W100, D200, W200, D300, & W300's, 1970 & 1971 D100, D200, D300 & W300's stock with the V8 except the 383ci as the Y pipe for the 383ci has never been reproduced for this MY's. Give us a call to see what we can do for you at 800-503-9428. Photo depicts the stock single exhaust for 1967-68 D100 ½T's & D200 ¾T's Regular Cab with 127" WB and the stock 318ci V8- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
- For 1961-64 models, this system is for conventional cabs only.
- 1965-68 models will be asked to report the serial number. We will need to know if it falls before or after SN 166800. The difference being that early models require flat gaskets at the manifold while the later models are a metal-to-metal connection at the manifold.
- 1969-71 models will be asked to report whether the truck is stock with or without a cowl.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 CJ-5, CJ-5A, and D-J5 with the stock Dauntless V6 225ci. The photo depicts the exhaust system for 1966-71 CJ5, CJ5A and DJ5 with gas tank forward of the rear axle.
- 1966-Early 1971 with the gas tank sitting forward of the rear axle, this single exhaust system consists of a Y pipe, rear exhaust pipe, transverse muffler and tailpipe exiting on the PS.
- Later 1971 models with the gas tank sitting aft of the rear axle; this single exhaust pipe consists of a cross-over pipe, Y pipe, inline muffler and tailpipe exiting on the DS.
- You will need to report which system is needed in the check out process.
-
This listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Star Chief, Bonneville, and Catalina's stock with a V8 and single exhaust. This is a stock set up for 1965 Catalina w/ 3 spd STD 2 bbl carb, 1971-73 full size with the 350ci, and 1974 full size models. For all other applications this is a resonator eliminator option. If you system was stock with the resonator and you would like to keep it stock, please refer to 453228. Photo depicts the stock single exhaust with the resonator eliminated for 1969-70 Catalina's with the stock 400ci or 428ci and automatic transmission.- Single exhaust system consist of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 Olds 98, Delta 88 and Royale's with the stock V8 and single exhaust. Photo depicts the single cat-back exhaust for 1981-83 Delta 88's with the stock 307ci.- Single cat-back exhaust consists of the rear exhaust pipe, muffler, connector pipe, and resonator with tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing covers 1953 and 1954 Darrin's with the Small 6. Photo depicts the system for a 1954 Kaiser (with the SN 20141). Our system’s come with a conventional 4″ muffler.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, and muffler with tailpipe.
-
This listing covers model years 1965, 1966, 1967, and 1968 Coronet, Charger, Polara, Custom 880, Super Bee, and Monaco's that were stock with a 1 muffler single exhaust.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1969, 1970, 1971, 1972, 1973, and 1974 Polara, Charger, Coronet, and Super Bee's stock with the V8 and single exhaust with 1 muffler.
- Single exhaust system varies; some will take a Y pipe, rear exhaust pipe, muffler, and tailpipe while other require a Y pipe, muffler and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1936, 1937, 1938, 1939, and 1940 Cadillac's with stock single exhaust with 2 mufflers. Excludes Model 65 as we do not have patterns. Photo depicts the system for a 1937 Cadillac 70 Series.- For Model's 60, 60S, 70 & 75 this system consists of the front exhaust pipe, rear exhaust pipe, front muffler, over-axle pipe, rear transverse muffler w/long inlet pipe, tailpipe and bracket.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
Convert your 1957, 1958, or 1959 Chevy ½T, ¾T, or 1T with a small block 283ci V8 to dual's with Waldron's exclusive dual conversion kits that bolt onto your original manifolds that dump straight down with 3blt connection. Photo depicts the system for MY's 1957-59 Chevy ½T's with a long wheel base and the stock 283ci.- Dual conversion kit consists of gaskets, clamps, LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS custom-built glasspacks, and LS/RS tailpipes. The 4 universal hangers are not included but can be added to your cart.
- System is 2" throughout.
-
If you have an Inline 6 cylinder engine in your 1950, 1951, 1952, 1953, 1954, or 1955 Chevy ½T, ¾T or 1T and have always wanted a dual exhaust system then this listing is for you! This system is a direct fit to your cast iron Fenton Chevy 6 cyl headers. This system does not include the cast iron Fenton headers.- This dual conversion kit consists of inboard & outboard exhaust pipes, dual in/dual out muffler and inboard/outboard tailpipes.
- During the check out process, let us know how you would like your tailpipes to exit; out the sides along the quarter panel or straight out the back.
-
This listing covers model years 1948, 1949, 1950, 1951, and 1952 Ford ½T, ¾T & 1T trucks with the stock flathead V8. Convert your flathead Ford to dual's with Waldron's exclusive Dual Conversion kits! Complete kits bolt on to the original manifolds. Photo depicts the dual conversion for 1948-52 Ford F1 with the stock V8- Dual conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS glasspacks, LS/RS tailpipes, gaskets, and clamps.
- Period specific hangers are N/A. Universal hangers only. Hangers are not included in the kit but may be added to your cart.
- Exhaust pipes start out at 1&5/8" OD and increase to 2"OD immediately after the flange. Tail pipes are 1¾"OD.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process.
-
Listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T Trucks with the stock flathead V8. Convert your flathead Ford to dual exhaust with Waldron's exclusive Dual Conversion kits! Complete kit bolts on to the stock manifolds. Not available for 1933-34, 1942-47 or 1953 MY's.
- Dual conversion kit consists of the exhaust pipes, custom-built glasspacks, tailpipes, blocker plate, gaskets and clamps. Gaskets & steel clamps are included. After 1949, the RS exhaust requires blocking plate which will be included in the system. Universal hangers can be added to the cart, if needed. Period specific hangers are N/A.
- The system goes through existing holes in the crossmembers. LH exhaust pipe starts at 1 ½”OD and opens to 2”OD at the glasspack inlet. RH exhaust pipe 2” OD throughout. Tailpipes are either 1 5/8” or 1 ¾” depending on the material selected & MY.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. Additional cost of $115.00 for aluminized steel or $230.00 for T409 SS.
-
This listing covers 1927, 1928, 1929, 1930, 1931, 1932, and 1933 Willys-Knight with the stock 6 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This cat-back listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, and 1992 Firebird's with either a 4, 6, or 8 cyl engine and stock with 2 tailpipes. Photo depicts the cat-back single exhaust system for 1990-92 Firebirds with the stock 189T or 191ci 6cyl. All parts shown are NORS .- For MY's 1983-84 with a 6 cyl & MY's 1983-86 with a 4 cyl; single cat-back system consists of the rear exhaust pipe, single in/dual out same side transverse muffler, and tailpipes.
- For all 8 cyls & all other MY's for the 6 & 4 cyl; single cat-back system consists of the rear exhaust pipe, single in/dual out opposing sides transverse muffler, and LS/RS tailpipes.
- Some or all parts may be NORS
-
Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single to dual cat-back exhaust system consists of the rear Y pipe, LS/RS mufflers, LS/RS front tailpipes, and LS/RS rear tailpipes. This application did not come stock with chrome tips.
- If pipes forward of converter and/or converter are needed, please contact us for availability and pricing.
-
- This single exhaust consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
-
Listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Fords passenger cars with the stock flathead V8 with stock manifolds. This listing is not for Ford trucks. See listing 453292 for 1935-41 Ford ½T's & 453293 for 1948-52 F1-F3's dual conversion kits. Convert your flathead Ford to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. Photos depicts the system for MY's 1949-53.
- 1935-38; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1½".
- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the glasspacks, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the glasspacks, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers model years 1977, 1978, 1979, 1980, and 1981 Z28's stock with a dual exhaust. Photo depicts the cat-back system for 1977-79 Z28's with the stock V8.
- Complete dual cat-back exhaust system begins behind the catalytic converter and consists of the Y pipe, LS/RS mufflers, and LS/RS tailpipes. Y pipe may be NORS. If parts forward of this cat-back system are needed, please contact us for price and availability.