- Select this option if you are looking for a stock replacement oval muffler. The checkout process will ask questions regarding your application and muffler will be built to the stock specifications.
- Excludes 1961-69 Lincoln Continentals.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material. -
- Ford Fairlane & Torino: 1971: Cobra Hardtop w/351 Eng., Sedan, Hardtop & Convertible w/Std Trans., all GT Hardtop & Conv., Cobra Hardtop w/429 Eng. 1970: 429 Std. Eng. w/ Std. Trans., after 11/10/69, Exc. GT Hardtop, Conv., Cobra Hardtop, S.W., Ranchero, GT Hardtop, Conv., Cobra Hartop 429 Std. Eng., Dual L&R, 429 Cobra Jet Super Cobra Jet engine, Exc. Ranchero - Dual L&R 1969: 428 Eng. Exc. Ranchero, Dual L&R 1966: 6&8 Cyl. Single & Dual Exhaust, Exc. S.W.
- Ford Falcon: 1967-70 6 Cyl., 8 Cyl before 1/1/70, Exc. S.W.
- Mercury Comet & Montego: 1971: Cyclone, 351, 429, Exc. GT 1970: 429 Std. Eng. W/Std. Trans., after 11/10/69, Dual L&R, Exc. Cyclone Hardtop, S.W., Cyclone Hardtop 429 Std. Eng., Dual L&R, 429 Cobra Jet, Super Cobra Jet Engs., Dual L&R 1969: 428 Eng., Dual L&R 1966: 6&8 Cyl. Single & Dual Exhaust, Exc. S.W.
- This OE tailpipe hanger gets attached to the trunk and will come with a trunk support plate (not shown in photo).
-
This listing covers MY's 1976, 1977, 1978, 1979 & 1980 Jeep CJ-5's and CJ-7's with stock 304ci. This system was stock with a catalytic converter and the converter must in place for system to fit. If you are in need of a new direct fit catalytic converter, you may add it to your cart (for an additional $335.00) in the check out process. Photo depicts the system for 1977-78 CJ-7's with the stock 304ci (shown with the converter that we supply in place).- Single exhaust will consist of the Y pipe, muffler, and tail pipe. Stock converter sits between the Y pipe and muffler.
-
This listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Ford's with their respective stock flathead V8. Photos depicts the single exhaust system for a 1939 Ford Coupe without the heat exchanger (where customer opted to have tailpipes cut to reduce the cost of shipping).- For MY's 1935-36 & 1941-48 this single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
- For MY's 1937-40: If your 1937-40 Ford has the heat exchanger & you intend to reuse it; the system will consist of a cross-over pipe, exhaust pipe, muffler & tailpipe. If your 1937-40 doesn't have the heat exchanger or if it does have it but it is not reusable; the system will consist the 2 pc. Y pipe (AKA cross-over & Y pipe), muffler & tailpipe. You will be asked to report which setup you require in the check out process.
-
This listing covers model years 1957, 1958, 1959, and 1960 Cadillac's stock with a dual exhaust with 4 mufflers. Photo depicts the system for MY's 1959-60 Cadillac's except 75 Fleetwood and Eldorado Brougham (front connector pipe varies for the Fleetwood, rear connector pipe varies for the Brougham).- Dual exhaust system consists LS/RS front exhaust pipes, LS/RS rear exhaust pipe, LS/RS front mufflers, LS/RS front connector pipes, LS/RS center connector pipes, LS/RS rear connector pipes, LS/RS rear mufflers, LS/RS tailpipes. 1957 models will fit into the factory tips located in the bumper. 1958-60 are stock with turndowns.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
-
This listing covers model years 1961, 1962, 1963, and 1964 Cadillac V8 with single exhaust. Photos depicts 1964 Cadillac's except 75 Fleetwood's and Commercial Chassis.- This single exhaust system consists of the Y pipe, muffler, front connector pipe, rear connector pipe, resonator and tailspout.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 CJ-5, CJ-5A, and D-J5 with the stock Dauntless V6 225ci. The photo depicts the exhaust system for 1966-71 CJ5, CJ5A and DJ5 with gas tank forward of the rear axle.- 1966-Early 1971 with the gas tank sitting forward of the rear axle, this single exhaust system consists of a Y pipe, rear exhaust pipe, transverse muffler and tailpipe exiting on the PS.
- Later 1971 models with the gas tank sitting aft of the rear axle; this single exhaust pipe consists of a cross-over pipe, Y pipe, inline muffler and tailpipe exiting on the DS.
- You will need to report which system is needed in the check out process.
-
Listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Fords passenger cars with the stock flathead V8 with stock manifolds. This listing is not for Ford trucks. See listing 453292 for 1935-41 Ford ½T's & 453293 for 1948-52 F1-F3's dual conversion kits. Convert your flathead Ford to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. Photos depicts the system for MY's 1949-53.- 1935-38; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1½".
- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the glasspacks, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the glasspacks, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers model years 1971, 1972, 1973, 1974, 1975, 1976, 1977, and 1978 International Scout's with the stock 304ci or 345ci and stock with dual exhaust. The photo depicts the system for MY's 1971-78 Scout's with 100" WB.- This dual exhaust system consists of LS/RS front exhaust pipes (with flat spots in the stock locations), LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 Chevy C10, C20, and C30's stock with the V8 and single exhaust. Excludes 1966-69 K Series with 4WD. For MY's 1968-72; you will need to report whether your truck is stock with or without rear leaf springs. Photo depicts the system for MY's 1957-59 Chevy ½T's with the stock V8.- System consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1968, 1969, 1970, 1971, 1972, 1973, and 1974 AMC Javelin's and AMX's with the stock V8 and stock dual exhaust. Photo depicts the system for a 1970 AMX with the 360ci V8 (rear exhaust pipes are different on a Javelin).- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes, along with a set of the OE style tips.
- For MY's 1968, 1969 & 1970 the angle cut tips will be of the same material as the rest of the system.
- For MY's 1971, 1972, 1973 & 1974, You will be asked to report which tips you would like; chrome turndown tips or angle cut tips in the same material as the system.
-
This listing covers MY's 1961, 1962, and 1963 Continentals with the stock V8.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.
-
This listing covers model years 1964 Full Sizes stock with the 421HO, 1965, 1966, 1967, 1968, 1969, and 1970 Star Chief, Bonneville, Executive, Catalina, Ventura, 2+2 and Grand Prix's with the stock V8 and a dual exhaust. Photos depicts the system for MY's 1969 and 1970 Bonneville & Executive's with the stock 400ci or 428ci (excludes the 428HO).- For MY 1965 station wagon's with the 421 HO this system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipe with resonators, & LS/RS rear tailpipes. For all other body styles the system consists of LS front & rear exhaust pipes, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes, & LS/RS resonators with tailpipe.
- For MY 1965 station wagon's except the 421 HO this system consists of LS front & rear exhaust pipes, RS exhaust pipe, LS/RS mufflers, LS/RS front connector pipes w/resonator, & LS/RS rear tailpipes. For all other body styles the system consists of LS front & rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe.
- For MY's 1966-70 station wagon's the system consist of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes with resonators built in.
- For all other body styles the system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS over-axle pipes, and LS/RS resonators with tailpipe.
- The 421 HO originally took cast iron flanges. We supply you with universal flanges but if you have the cast iron flanges, you will be able swap them out.
-
Waldron's Exhaust reproduces these OEM correct hangers. Hangers generally will ship within 1 wk. -
This listing covers model years 1965, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, and 1978 Ford F100, F250, and F350's with the stock V8. This listing excludes the 1973-77 trucks with the 460ci (for that system refer to listing 453306) and 1973-78 Super Cabs (for that system refer to listing 453305). For MY's 1975-78 these trucks were stock without a converter. Photo depicts the system for a 1969 F100 ½T with the stock 360ci V8.- This single exhaust system varies between models, model years and engines although most consists of a crossover pipe, Y pipe, muffler, and tailpipe. If you want to confirm exactly how your exhaust system is broken down, please give us a call. Y pipe may be NORS.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, and 1972 Jeepster Commando and C101 Jeepster's with the stock Dauntless V6 225ci engine. Photo depicts the single exhaust for 1967-72 Jeepster Commando C101 with after-market Saginaw steering and automatic transmission.- Single exhaust consists of the LS/RS exhaust pipes, Y pipe, muffler, and tailpipe.
- You will be asked to report the type of steering on your Jeepster; original Ross steering or after-market Saginaw steering?
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Mark IV, Mark V and Continentals stock with a V8 and single exhaust. Photo depicts the cat-back single exhaust for 1977-79 Continentals stock with the 400ci.- Single cat-back system starts behind the cat(s) and consists of the Y pipe, muffler, over-axle pipe, and resonator with tailpipe.
- MY 1975 Lincoln Mark IV's; you will need to report whether your Mark IV system is a direct fit to the manifolds & has no converters or whether it's stock with a converter on the DS.
- MY 1975 Lincoln Continental's; you will need to report whether your Continental is stock with 1 or 2 converter's.
- MY's 1976-79 all Lincoln's with the single exhaust require 2 converters. Y pipe may be NORS.
-
This listing covers model years 1966, 1967, 1968, and 1969 Continentals with the stock V8.- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.
-
This listing covers MY's 1964-65 Lincoln Continentals with the stock V8.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971,1972, 1973, 1974, and 1975 Scout's stock with either the 4 cyl or 6 cyl engine. This listing EXCLUDES 1970 Scouts with 232ci with manifold exit on the driver side. Photo depicts the system for Scouts after chassis FC60474 which has the muffler after the rear axle.- For Scouts up to chassis FC60474 and/or models with the muffler forward of the rear axle, this single exhaust system consists of an exhaust pipe, muffler, and tailpipe, with the tail pipe exiting out the passenger side.
- For Scouts after chassis FC60474 and/or models with the muffler after the rear axle, this single exhaust consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe, with the tail pipe exiting out the driver side.
- MY's 1961-70 do not require a gasket. MY's 1971-75 will require a gasket.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Commander, President, Golden Hawk, Silver Hawk, Lark, Hawk, and President Classic with the stock V8 and dual exhaust. Photo depicts the system for a 1962 Hawk hardtop stock with a dual exhaust.- For MY's 1959-64 Lark convertibles and 1963-64 Station Wagon's this dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes, and LS/RS rear tailpipes.
- For all other models this dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- 1958 Sedans will need to report whether it is a "long wheel base sedan" or "except long wheel base sedan".
- 1963 & 1964 Larks will need to report which type of filter is stock; spin-on filter or cartridge filter.
- 1964 Lark Station Wagons will need to report whether your SW has a sliding roof or not.
-
This listing cover model years 1963, 1964, and 1965 Riviera's. This listing does NOT cover a 1965 Buick Gran Sport. For that listing refer to listing 568810. Photo is correct to this listing.- Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes (AKA over-axle pipes), single transverse muffler and LS/RS tailpipes.
- System starts out at 2"OD, increases to 2¼"OD on the connector pipes, then reduces down to 1¾"on the tailpipes.
-
This listing covers MY's 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 & 1980 Scouts with the stock V8 304ci or 345ci and single exhaust. Photo depict the system for MY's 1973-77 Scouts with the 108"WB and the stock 304ci or 345ci V8 (tail pipes vary between wheelbases).- For MY's 1971-78 this single exhaust system consists of the LS/RS front exhaust pipes, Y pipe (AKA rear exhaust pipe), muffler, and tailpipe.
- For MY's 1979-80 this single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe and rear tailpipe.
- Y pipe may be NORS