Shop

  • Stock Oval Muffler

    $135.00$270.00
    Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.
    • Select this option if you are looking for a stock replacement oval muffler. The checkout process will ask questions regarding your application and muffler will be built to the stock specifications.
    • Excludes 1961-69 Lincoln Continentals. 
    • Ford Fairlane & Torino: 1971: Cobra Hardtop w/351 Eng., Sedan, Hardtop & Convertible w/Std Trans., all GT Hardtop & Conv., Cobra Hardtop w/429 Eng. 1970: 429 Std. Eng. w/ Std. Trans., after 11/10/69, Exc. GT Hardtop, Conv., Cobra Hardtop, S.W., Ranchero, GT Hardtop, Conv., Cobra Hartop 429 Std. Eng., Dual L&R, 429 Cobra Jet Super Cobra Jet engine, Exc. Ranchero - Dual L&R 1969: 428 Eng. Exc. Ranchero, Dual L&R 1966: 6&8 Cyl. Single & Dual Exhaust, Exc. S.W.
    • Ford Falcon: 1967-70 6 Cyl., 8 Cyl before 1/1/70, Exc. S.W.
    • Mercury Comet & Montego: 1971: Cyclone, 351, 429, Exc. GT 1970: 429 Std. Eng. W/Std. Trans., after 11/10/69, Dual L&R, Exc. Cyclone Hardtop, S.W., Cyclone Hardtop 429 Std. Eng., Dual L&R, 429 Cobra Jet, Super Cobra Jet Engs., Dual L&R 1969: 428 Eng., Dual L&R 1966: 6&8 Cyl. Single & Dual Exhaust, Exc. S.W.
    Waldron's Exhaust reproduces the OE correct tail pipe hanger. It is used on both single and dual exhaust systems. Simply order the amount needed for your system. Hangers generally ship out within 1 wk. 
    • This OE tailpipe hanger gets attached to the trunk and will come with a trunk support plate (not shown in photo). 
     
  • This listing covers MY's 1976, 1977, 1978, 1979 & 1980 Jeep CJ-5's and CJ-7's with stock 304ci. This system was stock with a catalytic converter and the converter must in place for system to fit. If you are in need of a new direct fit catalytic converter, you may add it to your cart (for an additional $335.00) in the check out process. Photo depicts the system for 1977-78 CJ-7's with the stock 304ci (shown with the converter that we supply in place). 
    • Single exhaust will consist of the Y pipe, muffler, and tail pipe. Stock converter sits between the Y pipe and muffler.
     
  • This listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Ford's with their respective stock flathead V8. Photos depicts the single exhaust system for a 1939 Ford Coupe without the heat exchanger (where customer opted to have tailpipes cut to reduce the cost of shipping).
    • For MY's 1935-36 & 1941-48 this single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
    • For MY's 1937-40: If your 1937-40 Ford has the heat exchanger & you intend to reuse it; the system will consist of a cross-over pipe, exhaust pipe, muffler & tailpipe. If your 1937-40 doesn't have the heat exchanger or if it does have it but it is not reusable; the system will consist the 2 pc. Y pipe (AKA cross-over & Y pipe), muffler & tailpipe. You will be asked to report which setup you require in the check out process.
  • This listing covers model years 1957, 1958, 1959, and 1960 Cadillac's stock with a dual exhaust with 4 mufflers. Photo depicts the system for MY's 1959-60 Cadillac's except 75 Fleetwood and Eldorado Brougham (front connector pipe varies for the Fleetwood, rear connector pipe varies for the Brougham).
    • Dual exhaust system consists LS/RS front exhaust pipes, LS/RS rear exhaust pipe, LS/RS front mufflers, LS/RS front connector pipes, LS/RS center connector pipes, LS/RS rear connector pipes, LS/RS rear mufflers, LS/RS tailpipes. 1957 models will fit into the factory tips located in the bumper. 1958-60 are stock with turndowns.
  • This listing covers model years 1961, 1962, 1963, and 1964 Cadillac V8 with single exhaust. Photos depicts 1964 Cadillac's except 75 Fleetwood's and Commercial Chassis. 
    • This single exhaust system consists of the Y pipe, muffler, front connector pipe, rear connector pipe, resonator and tailspout.
  • Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.
    • Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
  • This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 CJ-5, CJ-5A, and D-J5 with the stock Dauntless V6 225ci. The photo depicts the exhaust system for 1966-71 CJ5, CJ5A and DJ5 with gas tank forward of the rear axle.
    • 1966-Early 1971 with the gas tank sitting forward of the rear axle, this single exhaust system consists of a Y pipe, rear exhaust pipe, transverse muffler and tailpipe exiting on the PS.
    • Later 1971 models with the gas tank sitting aft of the rear axle; this single exhaust pipe consists of a cross-over pipe, Y pipe, inline muffler and tailpipe exiting on the DS.
    • You will need to report which system is needed in the check out process.
     
  • This listing covers model years 1971, 1972, 1973, 1974, 1975, 1976, 1977, and 1978 International Scout's with the stock 304ci or 345ci and stock with dual exhaust. The photo depicts the system for MY's 1971-78 Scout's with 100" WB.
    • This dual exhaust system consists of LS/RS front exhaust pipes (with flat spots in the stock locations), LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
  • Listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Fords passenger cars with the stock flathead V8 with stock manifolds. This listing is not for Ford trucks. See listing 453292 for 1935-41 Ford ½T's & 453293 for 1948-52 F1-F3's dual conversion kits.  Convert your flathead Ford to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. Photos depicts the system for MY's 1949-53.
    •  1935-38; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1½".
    • 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
    • 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
    • 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the glasspacks, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
    • 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the glasspacks, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
    Lead time on this system with glasspacks generally runs 5-6 wks. Lead time with mufflers (not glasspacks) will be an estimated 8-12 wks. 
  • This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 Chevy C10, C20, and C30's stock with the V8 and single exhaust. Excludes 1966-69 K Series with 4WD. For MY's 1968-72; you will need to report whether your truck is stock with or without rear leaf springs.  Photo depicts the system for MY's 1957-59 Chevy ½T's with the stock V8.
    • System consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.  Y pipe may be NORS.
  • This listing covers model years 1968, 1969, 1970, 1971, 1972, 1973, and 1974 AMC Javelin's and AMX's with the stock V8 and stock dual exhaust. Photo depicts the system for a 1970 AMX with the 360ci V8 (rear exhaust pipes are different on a Javelin). 
    • Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers,  and LS/RS tailpipes, along with a set of the OE style tips.
    • For MY's 1968, 1969 & 1970 the angle cut tips will be of the same material as the rest of the system.
    • For MY's 1971, 1972, 1973 & 1974, You will be asked to report which tips you would like; chrome turndown tips or angle cut tips in the same material as the system.
     
  • This listing covers model years 1964 Full Sizes stock with the 421HO, 1965, 1966, 1967, 1968, 1969, and 1970 Star Chief, Bonneville, Executive, Catalina, Ventura,  2+2 and Grand Prix's with the stock V8 and a dual exhaust. Photos depicts the system for MY's 1969 and 1970 Bonneville & Executive's with the stock 400ci or 428ci (excludes the 428HO). 
    • For MY 1965 station wagon's with the 421 HO this system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipe with resonators, & LS/RS rear tailpipes. For all other body styles the system consists of LS front & rear exhaust pipes, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes, & LS/RS resonators with tailpipe.
    • For MY 1965 station wagon's except the 421 HO this system consists of LS front & rear exhaust pipes, RS exhaust pipe, LS/RS mufflers, LS/RS front connector pipes w/resonator, & LS/RS rear tailpipes. For all other body styles the system consists of LS front & rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe.
    • For MY's 1966-70 station wagon's the system consist of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes with resonators built in.
    • For all other body styles the system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS over-axle pipes, and LS/RS resonators with tailpipe.
    • The 421 HO originally took cast iron flanges. We supply you with universal flanges but if you have the cast iron flanges, you will be able swap them out.
  • Waldron's Exhaust reproduces these OEM correct hangers. Hangers generally will ship within 1 wk. 
  • This listing covers MY's 1961, 1962, and 1963 Continentals with the stock V8.
    • Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
    • Waldron's does not offer any sound level options on these systems. OEM sound level only.
     
  • This listing covers model years 1965, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, and 1978 Ford F100, F250, and F350's with the stock V8. This listing excludes the 1973-77 trucks with the 460ci (for that system refer to listing 453306) and 1973-78 Super Cabs (for that system refer to listing 453305). For MY's 1975-78 these trucks were stock without a converter. Photo depicts the system for a 1969 F100 ½T  with the stock 360ci V8. 
    • This single exhaust system varies between models, model years and engines although most consists of a crossover pipe, Y pipe, muffler, and tailpipe. If you want to confirm exactly how your exhaust system is broken down, please give us a call. Y pipe may be NORS. 
  • This listing covers model years 1967, 1968, 1969, 1970, 1971, and 1972 Jeepster Commando and C101 Jeepster's with the stock Dauntless V6 225ci engine. Photo depicts the single exhaust for 1967-72  Jeepster Commando C101 with after-market Saginaw steering and automatic transmission.
    • Single exhaust consists of the LS/RS exhaust pipes, Y pipe, muffler, and tailpipe.
    • You will be asked to report the type of steering on your Jeepster; original Ross steering or after-market Saginaw steering?
     
  • This listing covers model years 1975, 1976, 1977, 1978, and 1979 Mark IV, Mark V and Continentals stock with a V8 and single exhaust. Photo depicts the cat-back single exhaust for 1977-79 Continentals stock with the 400ci. 
    • Single cat-back system starts behind the cat(s) and consists of the Y pipe, muffler, over-axle pipe, and resonator with tailpipe.
    • MY 1975 Lincoln Mark IV's; you will need to report whether your Mark IV system is a direct fit to the manifolds & has no converters or whether it's stock with a converter on the DS.
    • MY 1975 Lincoln Continental's; you will need to report whether your Continental is stock with 1 or 2 converter's.
    • MY's 1976-79 all Lincoln's with the single exhaust require 2 converters. Y pipe may be NORS. 
  • This listing covers model years 1966, 1967, 1968, and 1969 Continentals with the stock V8.
    • Dual exhaust consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
    • Waldron's does not offer any sound level options on these systems. OEM sound level only.
  • This listing covers MY's 1964-65 Lincoln Continentals with the stock V8.
    • Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
    • Waldron's does not offer any sound level options on these systems. OEM sound level only.
  • This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971,1972, 1973, 1974, and 1975 Scout's stock with either the 4 cyl or 6 cyl engine. This listing EXCLUDES 1970 Scouts with 232ci with manifold exit on the driver side. Photo depicts the system for Scouts after chassis FC60474 which has the muffler after the rear axle. 
    • For Scouts up to chassis FC60474 and/or models with the muffler forward of the rear axle, this single exhaust system consists of an exhaust pipe, muffler, and tailpipe, with the tail pipe exiting out the passenger side.
    • For Scouts after chassis FC60474 and/or models with the muffler after the rear axle, this single exhaust consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe, with the tail pipe exiting out the driver side.
    • MY's 1961-70 do not require a gasket. MY's 1971-75 will require a gasket.
       
  • This listing covers MY's 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 & 1980 Scouts with the stock V8 304ci or 345ci and single exhaust. Photo depict the system for MY's 1973-77 Scouts with the 108"WB and the stock 304ci or 345ci V8 (tail pipes vary between wheelbases).
    • For MY's 1971-78 this single exhaust system consists of the LS/RS front exhaust pipes, Y pipe (AKA rear exhaust pipe), muffler, and tailpipe.
    • For MY's 1979-80 this single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe and rear tailpipe.
    • Y pipe may be NORS
  • This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Commander, President, Golden Hawk, Silver Hawk, Lark, Hawk, and President Classic with the stock V8 and dual exhaust. Photo depicts the system for a 1962 Hawk hardtop stock with a dual exhaust. 
    • For MY's 1959-64 Lark convertibles and 1963-64 Station Wagon's this dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes, and LS/RS rear tailpipes.
    • For all other models this dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
    • 1958 Sedans will need to report whether it is a "long wheel base sedan" or "except long wheel base sedan".
    • 1963 & 1964 Larks will need to report which type of filter is stock; spin-on filter or cartridge filter.
    • 1964 Lark Station Wagons will need to report whether your SW has a sliding roof or not.
     
  • This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 Fairlane & Torino's, 1970-71 Ranchero's with the stock V8 and stock dual exhaust. Excludes 1966-69 Ranchero's & SW's which were stock with a single exhaust only. For 1967 Fairlane & Torino models, this is a resonator eliminator option. For the stock set up, refer 518765. Photo depicts the system for a 1970 Torino SCJ 
    • Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
     
  • This listing covers model years 1957, 1958 and 1959 Ford retractable hardtop's  and convertibles with the stock V8 and dual exhaust. For 1958 Convertibles, this is a resonator eliminator options. If you would like to keep your convertible stock with the resonators, please give us a call.  Photo depicts the system for 1957 Skyliner Retractable Hard Tops with the stock V8. 
    • Dual exhaust system consists of LS/RS front exhaust pipes, mufflers, LS/RS front tailpipe, and LS/RS rear tailpipes.
    • The front and rear tailpipe sections are different between a Retractable Hard Top and a soft-top Convertible. Please report the body-style appropriately. 
  • Listing covers MY's 1960 and 1961 Chryslers stock with the Ram Induction setup. Photo is correct to the listing.
    • Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes along with the 1&1/8" clamps needed at the preheater tubes.
    • The tailpipes are short on the 300; they end in front of the bumper and they are tucked up tightly under the trunk pan. You can’t see the tailpipe tips from the side of the vehicle.
    • The tailpipe hangers attach at the radius of the turndown, not on a straight section of pipe. This is a Waldron's exclusive design.
  • This listing cover model years 1963, 1964, and 1965 Riviera's. This listing does NOT cover a 1965 Buick Gran Sport. For that listing refer to listing 568810. Photo is correct to this listing. 
    • Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes (AKA over-axle pipes), single transverse muffler and LS/RS tailpipes.
    • System starts out at 2"OD, increases to 2¼"OD on the connector pipes, then reduces down to 1¾"on the tailpipes.
  • This listing covers model years 1961, 1962, 1963, and 1964 Star Chief, Bonneville, Catalina, and Grand Prix's (1962-64) with the stock V8 and a dual exhaust. For MY 1964 stock with the 421HO, this is a resonator eliminator option.  Photo depicts the system for full size Pontiac's with the stock 389ci. 
    • Dual exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
    • MY's 1963-64 do not require gaskets at the manifolds. The connection is metal-to-metal.
  • This listing covers model years 1965, 1966, 1967, 1968, and 1969 Mustangs with a V8 and allows owners of A Code's & some K Code's to update their Mustang's to the unique sound of the Arvinode dual exhaust. For 1965-66 K Code's this is close in appearance and sound to the stock set up. If you would like to have the stock set up for your 1965-66 K Code, which has the factory correct chamber tube tied into the muffler/resonators, please refer to listing 518737. The Base Model does not have the chamber tube that runs along the top of the muffler/resonators which gives the Concours the OEM correct look for 1965-66 K Code models. Photo depicted is correct to the listing. 
    • The Base model Arvinode dual system starts behind the stock H pipe and includes LS/RS connector (AKA rear exhaust pipes), LS/RS wave-tuned front mufflers WITHOUT externally mounted rectangular tubes, LS/RS over-axle pipes, LS/RS resonators with turndowns or GT exit.
    • These parts were welded into LS and RS assembly's from the factory and connected with clamps to the outlet end of the H pipe.
    • If the H pipe is needed, add it to your cart in the check out process.
    • Let us know if you need the GT exit or turndowns in the check out process.
  • This listing covers model years 1965, 1966, 1967, 1968, 1969, and 1970 Ford Custom, LTD, and Galaxies with the stock V8 and dual exhaust. Includes convertibles and station wagon's. Excludes 1966 and 1967 7 Liter systems.  Photo depicts the system for a 1966 Galaxie with the stock 352ci. 
    • For all model years but 1965 SW this dual exhaust consists of the H pipe, LS/RS mufflers, LS/RS front tailpipes, and LS/RS rear tailpipes. Tailpipe were 1 piece from the factory but come in 2 pieces in reproduction. H pipe may be NORS. 
    • 1965 full size station wagon has the H pipe, LS/RS mufflers, LS front, center and rear tailpipes and RS front and rear tailpipes. H pipe may be NORS.
  • This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Eldorado's. Photo depicts the cat-back system for 1975-78  Fleetwood Eldorado's.
    • Cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and short tailpipe. If converter and/or pipes off the manifold are needed, please give us a call for pricing and availability. 
     
  • This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Buick's with a straight 8. This listing is for MY's 1941-46 Buick's stock with a single carburetor set up. If your 1941-46 Buick was stock with a dual carburetor set-up refer to listing 568792. Photo depicts the system for a 1938 Buick 40 Series Special.
    • For MY's 1936-39 this single exhaust system consists of exhaust pipe, muffler, and tailpipe.
    • For MY's 1940-48 this single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
     
  • Waldron's Exhaust reproduces this set of 4 OE correct hangers for 1968,1969and 1970 AMC Javelin's and AMX's. This set consists of the LS/RS front and rear tail pipe hangers. This part will generally ship within 1 wk. 
  • This listing covers model years 1950, 1951, 1952, 1953, 1954, 1956, 1957, 1958, 1957, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 International ½T, ¾T, and 1T's L110, L111, L112, L120, L121, L122, L130, R100, R102, R110, R111, R120, R121, R122, S100,  S110, S112, S130,  A110, A120, A130, B100, B110, B120, B130, C110, C120, C130, 1100A, 1200A, 1300A, C1000, D1000, C1100, D1100, C1200, D1200, C1300, D1300's stock with 2WD (excludes 4WD) and 1972, 1973, 1974, and 1975 International ½T, ¾T, and 1T's 1010, 1110, 1210, 1310, MS1210, 100 & 200 with either 2WD or 4WD . Photo depicts the exhaust system for 1956 International ½T-2T with the stock BD220ci 6 cyl engine and with the spare tire carrier mounted on the left side, front of the bed on the outside.  Through the check out process be sure to let us know where the spare tire is located on your International and for MY's 1974 International 100 or 200 & 1975 International 100, 150, and 200's with the 258ci, be sure to give us your axle code.
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
    • For MY's 1950-61: Exhaust pipe will not come with a flange (replacement is NA). You will need to keep the original cast-iron flange and reuse it.
    • For MY's 1962-75:  Exhaust pipe will come with a flange however if you have an original cast iron flange, keep and reuse it
     
  • This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Ford F1, F2, F3, F4, F5 and F6's stock with the V8 and single exhaust. Photo depicts the crossover pipe and Y pipe for 1942-52 F1, F2, & F3's with V8, the muffler and tailpipes vary.
    • Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
  • This listing covers model years 1948, 1949, 1950, 1951, and 1952 Ford ½T, ¾T & 1T trucks with the stock flathead V8. Convert your flathead Ford to dual's with Waldron's exclusive Dual Conversion kits! Complete kits bolt on to the original manifolds. Photo depicts the dual conversion for 1948-52 Ford F1 with the stock V8
    • Dual conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS  glasspacks, LS/RS tailpipes, gaskets, and clamps.
    • Period specific hangers are N/A. Universal hangers only. Hangers are not included in the kit but may be added to your cart.
    •  Exhaust pipes start out at 1&5/8" OD and increase to 2"OD immediately after the flange. Tail pipes are 1¾"OD.
    • If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. 
    Lead time on this system with glasspacks generally runs 5-6 wks., with mufflers the lead time will be as posted above.  

Title

Go to Top